Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves

Ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) techniques have been employed as complementary techniques to extract oils from vegetable sources, viz, soybean germ and a cultivated marine microalga rich in docosahexaenoic acid (DHA). Ultrasound (US) devices developed by ourselves, working at several frequencies (19, 25, 40 and 300 kHz), were used for US-based protocols, while a multimode microwave (MW) oven (operating with both open and closed vessels) was used for MAE. Combined treatments were also studied, such as simultaneous double sonication (at 19 and 25 kHz) and simultaneous US/MW irradiation, achieved by inserting a non-metallic horn in a MW oven. Extraction times and yields were compared with those resulting from conventional procedures. With soybean germ the best yield was obtained with a ‘cavitating tube’ prototype (19 kHz, 80 W), featuring a thin titanium cylinder instead of a conventional horn. Double sonication, carried out by inserting an immersion horn (25 kHz) in the same tube, improved the yield only slightly but halved the extraction time. Almost comparable yields were achieved by closed-vessel MAE and simultaneous US/MW irradiation. Compared with conventional methods, extraction times were reduced by up to 10-fold and yields increased by 50–500%. In the case of marine microalgae, UAE worked best, as the disruption by US of the tough algal cell wall considerably improved the extraction yield from 4.8% in soxhlet to 25.9%. Our results indicate that US and MW, either alone or combined, can greatly improve the extraction of bioactive substances, achieving higher efficiency and shorter reaction times at low or moderate costs, with minimal added toxicity.     

Transition from rigid to flexible structures in micelles of Undecylammonium chloride in aqueous solutions of NaCl

Small angle neutron scattering (SANS) data for Undecylammonium chloride (UAC) in heavy water in the presence of NaCl 0.0428 and 0.3422 M are consistent with the presence of elongated micelles. This micellar shape has been adopted to analyze viscosity data of UAC in water in the presence of NaCl. The results obtained from this last technique are consistent with the increase of the micelle aggregation number with increasing the surfactant concentration. Micelles change from prolate ellipsoidal shape to cylindrical and wormlike shapes by increasing the added NaCl concentration and surfactant concentrations. The differences between results for the micelle aggregation number calculated from viscosity, SANS and light scattering data have been attributed to the solvent effect on micelle formation as well as changes in the size, shape and flexibility of the micelle. Viscosity data provide qualitative information on the effect of the added NaCl concentration and surfactant concentration on the size, shape, flexibility of the micelles in diluted solutions.     

Anatomical location of Macrophage Migration Inhibitory Factor in urogenital tissues,peripheral ganglia and lumbosacral spinal cord of the rat

Background

Previous work suggested that macrophage migration inhibitory factor (MIF) may be involved in bladder inflammation. Therefore, the location of MIF was determined immunohistochemically in the bladder, prostate, major pelvic ganglia, sympathetic chain, the L6-S1 dorsal root ganglia (DRG) and the lumbosacral spinal cord of the rat.

Results

In the pelvic organs, MIF immunostaining was prominent in the epithelia. MIF was widely present in neurons in the MPG and the sympathetic chain. Some of those neurons also co-localized tyrosine hydroxylase (TH). In the DRGs, some of the neurons that stained for MIF also stained for Substance P. In the lumbosacral spinal cord, MIF immunostaining was observed in the white mater, the dorsal horn, the intermediolateral region and in the area around the central canal. Many cells were intensely stained for MIF and glial fibrillary acidic protein (GFAP) suggesting they were glial cells. However, some cells in the lumbosacral dorsal horn were MIF positive, GFAP negative cells suggestive of neurons.

Conclusions

Therefore, MIF, a pro-inflammatory cytokine, is localized to pelvic organs and also in neurons of the peripheral and central nervous tissues that innervate those organs. Changes in MIF's expression at the end organ and at peripheral and central nervous system sites suggest that MIF is involved in pelvic viscera inflammation and may act at several levels to promote inflammatory changes.

     

Synthesis of optical standard frequencies in the S, C and L telecommunication bands by use of four-wave mixing in semiconductor optical amplifiers

The generation of standard reference frequencies close to the ITU channels is essential for the calibration and maintenance of DWDM systems. This work describes a method to synthesize frequency references in the range from 187.1 to 205.1 THz (1462-1602 nm). The method is based on the generation of four equispaced frequencies (by the process of four-wave mixing in a semiconductor amplifier) of which two are locked to absorption lines of the acetylene ¹²C₂H₂ (1511-1542 nm).     

Glycerol and glycerol carbonate as ultraviscous solvents for mixture analysis by NMR

NMR of weakly polar analytes in an apolar ultraviscous solvent has recently been proposed for mixture analysis as a pertinent alternative to the DOSY experiment. The present article reports the first use of glycerol and glycerol carbonate as polar solvents for the NMR analysis of a model mixture of dipeptides. This work demonstrates the high potentiality of these solvents for the analysis of mixtures made of polar and potentially bioactive compounds. Medium-sized molecules slowly reorient in glycerol and glycerol carbonate under particular temperature conditions, so that solute resonances may show spin diffusion in NOESY spectra, thus opening the way to mixture analysis. Glycerol and glycerol carbonate have turned out to be ultraviscous solvents of choice for the individualization of four structurally close mixed dipeptides: Leu-Val, Leu-Tyr, Gly-Tyr and Ala-Tyr by means of 1D and 2D NOESY experiments. Selective sample excitation and signal detection were implemented to eliminate the intense proton signals of the non-deuterated solvents. Moreover, the recording of a multiplet selective 2D NOESY-TOCSY has shown that the analytical power of NMR in highly viscous solvents is not limited to the extraction of mixture component 1D subspectra but may also yield some supplementary information about atom connectivity within components.     

Study of molecular surface coating on the stability of maghemite nanoparticles

In this study γ-Fe₂O₃ nanoparticle, surface-coated with increasing amount of oleic acid, have been prepared while the stability against particle degradation under laser excitation intensity was investigated. Maghemite nanoparticle was obtained via oxidation of magnetite nanoparticle, the latter synthesized by co-precipitation of Fe (II) and Fe (III) ions in alkaline medium. By varying the experimental conditions of surface-coating maghemite nanoparticles with oleic acid, samples with different grafting coefficient were obtained and investigated using X-ray diffraction and different spectroscopic techniques, namely Raman, Mössbauer, and infrared. The amount of oleic acid adsorbed on the maghemite surface was estimated via the carbon content obtained from elemental analysis.     

Carrier diffusion in InGaAs/GaAs quantum wells grown on vicinal GaAs(0 0 1) substrates

We have investigated the influence of vicinal GaAs substrates on the optical and electronic properties of InGaAs/GaAs quantum wells (QWs). A single In_0.10Ga_0.90As QW was grown by molecular-beam epitaxy on a vicinal GaAs(0 0 1) substrate with a miscut angle of 0° (nominal), 2°, 4° and 6° towards [1 1 0]. The carrier diffusion was obtained by a micro-photoluminescence scan technique that permits to observe the effective diffusion length characterized by the lateral spread of carriers in the QW followed by radiative recombination. The carrier diffusion length was obtained parallel (L_||) and perpendicular (L) to the atomic steps. The diffusion length decreases as the temperature increases up to 100 K. Above this temperature we found different behaviours that depend on the sample miscut angle.     

Lie symmetries and solitons in nonlinear systems with spatially inhomogeneous nonlinearities

Using Lie group theory and canonical transformations, we construct explicit solutions of nonlinear Schr?dinger equations with spatially inhomogeneous nonlinearities. We present the general theory, use it to show that localized nonlinearities can support bound states with an arbitrary number solitons, and discuss other applications of interest to the field of nonlinear matter waves.     

Influence of processing parameters on nanomaterials synthesis efficiency by a carbothermal reduction process

In this work, the influence of synthesis parameters on the synthesis efficiency of tin oxide nanomaterials was studied by using the carbothermal reduction method in a sealed tube furnace. The parameters were the starting material, temperature and time of synthesis as well as the gas flux. The starting material was tin dioxide mixed with carbon black in a molar proportion of 1.5:1 and 1:1. The temperature range was from 950 to 1,125 °C with a step of 25 °C, and the synthesis times used were 15, 30, 45, 60, 75, 90, and 120 min. Using optimum values of the above parameters, the gas flux was changed to verify its influence. After completion of the syntheses, we found a grayish-black material inside the tube which was characterized by X-ray diffraction and scanning electron microscopy. The results showed that the collected material is composed of nanobelts (with width around 60 nm) and disks that grew preferentially in the SnO phase. A model based on the oxide vapor pressure was proposed to evaluate the efficiency of the process, and the results showed good agreement between experimental data and the proposed model. Based on the results obtained, the best conditions to obtain a homogeneous material with 95% efficiency is using a starting material in the molar proportion Sn:C of 1.5:1, a temperature of 1,132 °C for 75 min, and a N₂ gas flux of 80 sccm.