Spectrophotometric study of bismuth with N-(2-acetamido)iminodiacetic acid (ADA): Determination of bismuth in pharmaceutical formulations

A new method for the Spectrophotometric determination of bismuth using N-(2-acetamido)iminodiacetic acid as complexometric agent is proposed. The complex is formed in a wide pH range, 5.5–7.5, and has a maximum absorption at 265 nm. Beer's law is obeyed in the interval 3.8–17.9 μg of bismuth(III)/ml, with a minimum photometric error of 2.3. The molar absorptivity is 9.1 × 10³ liters/cm mol. The stoichiometry of the reaction takes place in the metal-to-ligand ratio 1:2. The interferences produced by the more common ions are studied. The method has been successfully applied to the determination of bismuth in pharmaceutical formulations.     

Radionuclide X-ray fluorescence analysis of drinking water using preconcentration of trace metals on chelating cellulose exchanger OSTSORB-OXIN

Determination of Cr, Fe, Cu, Zn and Pb in drinking water preconcentrated on a chelating ion exchanger of Czechoslovak production is described. The analytical system consisted of a radionuclide source²³⁸Pu, a Si/Li semiconductor detector and a multichannel analyzer. Results are compared with trehshold limit values recommended for drinking water.     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

Applications of the dicarbollylcobaltate(III) anion in the water/nitrobenzene extraction system

The fundamental properties of the polyhedral sandwich dicarbollylcobaltate(III) anion {[pi-(3)-1,2-B(9)C(2)H(11)](2)Co(III)}(-) are given, together with results for extraction of alkali-metal, alkaline-earth metal and some other cations (e.g., H(+), Pb(2+), Pd(2+) and Ce(3+)) into nitrobenzene and corresponding analytical applications. Considerable attention is paid to charge-transfer through the water-nitrobenzene interface in the presence of this hydrophobic anion.     

Nucleophilic additions of lithiated allylphenylsulfone to nitrones: experimental and theoretical investigations

The nucleophilic addition of lithiated allylphenylsulfone to nitrones at −80 °C proceeds exclusively α to the phenylsulfonyl group affording anti adducts in high yield. At 0 °C isoxazolidines are obtained with complete all-trans selectivity. The formation of these compounds involves isomerization of the allylsulphonyl moiety to give a transient vinylsulfone that then undergoes a subsequent intramolecular Michael addition. The addition to several nitrones has been studied and theoretical calculations have been refined to accurately explain the selectivity of the allylation reaction.     

Parallel and multiplexed bead-based assays and encoding strategies

Advances in high throughput screening (HTS), together with the rapid progress in combinatorial chemistry, genomic and proteomic sciences have dramatically stimulated the development of a variety tools to enable the drug discovery process to become more efficient. Major future challenges in HTS include obtaining high density and good quality data based on assays that are rapid, reliable, inexpensive, sensitive, simple and miniaturised. This paper reviews the development and role of bead-based assays for HTS including DNA and single nucleotide polymorphism (SNP) assays, particularly from a multiplex perspective and evaluating the recent advances in bead-based arrays. The encoding strategies that are commonly used in bead-based assays are highlighted, while the importance of magnetic beads in genomic and proteomic purifications is discussed. In conclusion, bead-based assays offer a powerful promising approach for many aspects of drug discovery.     

Neutron activation analysis of microgram amounts of thorium in uranium ores and process liquors by means of thorium-233

A method is described for neutron activation analysis of thorium by employing thorium-233. Decontamination steps include anion exchange in 12.5 N HCL, precipitation of fluoride, extraction with mesityl oxide and thorium oxalate precipitation. The time spent is less than 1 h; spurious activities in counting samples amount only to 2% and can easily be corrected for. The sensitivity of the method is ca. 0.02 μg of thorium in a neutron flux of 10¹²n/cm²/sec with an irradiation time of 5 min.     

Synthetische Versuche in der Gruppe hypotensiv wirksamer Alkaloide, 13. Mitt.: Synthese vondl-10-Methyldeserpidin,dl-10-Äthoxydeserpidin unddl-10-Methylmercapto-deserpidin

Zusammenfassung Die durch Umsetzung von 5-Methyltryptamin, 5-Äthoxytryptamin und 5-Methylmercapto-tryptamin (I, R=CH₃, OC₂H₅ bzw. SCH₃) mit dem racemischen Aldehyd-Ester II entstandenenSchiffschen Basen wurden durch Natriumborhydrid-Reduktion in Methanol unter gleichzeitiger Cyclisierung und Desacetylierung in die entsprechenden 10-substituiertendl-Methyl-2,3-seco-3-oxodeserpidate (IV) übergeführt. Die bei der Einwirkung von 3,4,5-Trimethoxybenzoylchlorid in Pyridin erhaltenen Ester V wurden weiter mit Phosphoroxychlorid cyclisiert und die Produkte als Perchlorate (VI) mit Zink in sauerer Lösung zu den entsprechenden 10-substituiertendl-Deserpidinen (VII, R=CH₃, OC₂H₅ bzw. SCH₃) reduziert. Mit Hilfe der Chromatographie gelang es in zwei Fällen, aus den Rohprodukten auch die entsprechendendl-3-Isodeserpidine (VIII, R=CH₃ bzw. OC₂H₅) zu isolieren. Zum Unterscheiden der Produkte der normalen Reihe (VII) und der 3-Iso-Reihe (VIII) wurden IR-Spektren und die Papierchromatographie angewendet.Mit 2 Abbildungen     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.