Erratum to: “Comparative studies of Pd, Ru, Ni, Cu/ZnAl2O4 catalysts for the water gas shift reaction”

The original version of the article was published in Cent. Eur. J. Chem. 11(6) (2013) pp. 912–919. Unfortunately, the original version of this article contains a mistake in the Acknowledgement section. It should be written as “Partially financed from grant number 0680/B/H03/2011/40 and gratefully acknowledged. Pawe? Mierczyński is a participant of START Programme.”     

Electron localizability indicators ELI–D and ELIA for highly correlated wavefunctions of homonuclear dimers. I. Li2, Be2, B2, and C2

Electron localizability indicators based on the parallel‐spin electron pair density (ELI–D) and the antiparallel‐spin electron pair density (ELIA) are studied for the correlated ground‐state wavefunctions of Li₂, Be₂, B₂, and C₂ diatomic molecules. Different basis sets and reference spaces are used for the multireference configuration interaction method following the complete active space calculations to investigate the local effect of electron correlation on the extent of electron localizability in position space determined by the two functionals. The results are complemented by calculations of effective bond order, vibrational frequency, and Laplacian of the electron density at the bond midpoint. It turns out that for Li₂, B₂, and C₂ the reliable topology of ELI–D is obtained only at the correlated level of theory. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Analytical techniques for single-cell metabolomics: state of the art and trends

Single-cell metabolomics is an emerging field that addresses fundamental biological questions and allows one to observe metabolic phenomena in heterogeneous populations of single cells. In this review, we assess the suitability of different detection techniques and present considerations on sample preparation for single-cell metabolomics. Although targeted analysis of single cells can readily be conducted using fluorescent probes and optical instruments (microscopes, fluorescence detectors), a comprehensive metabolomic approach requires a powerful label-free method, such as mass spectrometry (MS). Mass-spectrometric techniques applied to study small molecules in single cells include electrospray MS, matrix-assisted laser desorption/ionization MS, and secondary ion MS. Sample preparation is an important aspect to be taken into account during further development of methods for single-cell metabolomics.     

Structure and properties of the low-lying electronic states of CeC(2) and CeC(2)(+)

Theoretical studies on the electronic and thermodynamic properties of several electronic states of CeC(2) and CeC(2)(+) have been carried out employing state-of-the-art single- and multireference techniques. The ground and the low-lying electronic states of these two species have been found to possess C(2v) triangular structures. A (3)B(2) state has been found to be the ground state of CeC(2) while for CeC(2)(+) (2)A(2) is the ground state. The computed electron ionization energy is in excellent agreement with experiment. The experimentally observed thermodynamic properties (dissociation and atomization energies) of reactions involving CeC(2) dissociation are corrected using the computed gas-phase properties of the molecule and the partition functions. The bent triplet and singlet state of CeC(2) exhibit large dipole moments (7.0-10.5 D) and it is consistent with the ionic character (through dative charge transfer) of the cluster in ground and excited states.     

Vibronic interaction in metalloporphyrin pi-anion radicals

The vibronic (vibrational-electronic) interactions in the pi-anion radicals of the metalloporphyrins (M=Cr, Mn, Fe, Co, Ni, Cu, and Zn), which show delocalized D4h structures in the neutral states, are discussed using B3LYP density-functional-theory calculations. The B1g and B2g modes of vibration can remove the degenerate 2Eg state of the pi-anion radicals in the D4h symmetric structures to lead to rectangular and diamond D2h distortions, respectively. Calculated vibronic coupling constants demonstrate that the B1g modes of vibration better couple with the degenerate electronic state, leading to the rectangular D2h distortion. In particular, the B1g modes of nu10 and nu11, which have dominant contributions from Calpha-Cm and Cbeta-Cbeta stretching, give large vibronic coupling constants in the pi-anion radicals. The vibronic coupling constant can be viewed as the Jahn-Teller distortion force, and therefore these C-C stretching B1g modes will play a central role in the Jahn-Teller effect of the pi-anion radicals of the metalloporphyrins.     

Hybrid bioelectrocatalyst for hydrogen peroxide reduction: immobilization of enzyme within organic-inorganic film of structured Prussian Blue and PEDOT

Fabrication of structured film (on glassy carbon substrate) composed of compact Prussian Blue (that has been prepared by alternate immersions and through assembling within ultra-thin layers of 4(pyrrole-1-yl)-benzoic acid, PPyBA) and poly(3,4-ethylendioxythiophene), PEDOT, is described. This functionalized film has been characterized by fast charge propagation, and it has served as a redox conducting template for permanent attachment of a model enzyme, horseradish peroxidase, HRP. The resulting organic-inorganic system acts as an effective hybrid bioelectrocatalyst for electroreduction of hydrogen peroxide, a model reactant for biosensors and biofuel cells. Among important issues are rigidity, permanence of enzyme attachment, morphology, hydrophilicity, and attractive mediating capabilities of the PEDOT-stabilized Prussian Blue based structured film.     

Reversible storage of molecular hydrogen by sorption into multilayered TiO2 nanotubes

The sorption of hydrogen between the layers of the multilayered wall of nanotubular TiO2 was studied in the temperature range of -195 to 200 degrees C and at pressures of 0 to 6 bar. Hydrogen can intercalate between layers in the walls of TiO2 nanotubes forming host-guest compounds TiO2 x xH2, where x < or = 1.5 and decreases at higher temperatures. The rate of hydrogen incorporation increases with temperature and the characteristic time for hydrogen sorption in TiO2 nanotubes is several hours at 100 degrees C. The rate of intercalate formation is limited by the diffusion of molecular hydrogen inside the multilayered walls of the TiO2 nanotube. 1H NMR-MAS and XRD data confirm the incorporation of hydrogen between the layers in the walls of TiO2 nanotubes. The nature and possible applications of the observed intercalates are considered.     

Membrane electrochemistry

Electrochemistry and biomembranes are interface science in that both are concerned with the phenomena at, as well as across, the interfaces. Membrane electrochemistry may be defined as the application of electrochemistry to biomembrane studies. Additionally, transport processes within the membrane are involved in biomembranes. Since biomembranes are diverse and are usually not amenable to probing by electrochemicophysical techniques, model membrane systems have been developed for their investigation.

The introduction of experimental bilayer lipid membranes (BLM) technique and its modifications have been instrumental in the development and testing of membrane transport concepts (carriers vs channels) and electronic processes in membranes. Instead merely viewing a biomembrane as a physical barrier containing carriers or channels to carry out ionic processes, an ultrathin lipid or biological membrane can also be considered as a complete ‘electrochemical cell’ with one membrane/solution interface reducing (as a cathode) and the other membrane/solution interface oxidizing (as an anode). It is now possible to understand energy transduction (charge generation, separation, and redox reactions) in terms of ultrathin lipid membranes separating two aqueous solutions.

In this paper, we shall discuss the basic principles of electrochemistry as they are applied to membrane studies. Emphasis will be on experimental bilayer lipid membranes (BLM) which have been extensively investigated as models of biomembranes.     

Correction to: Foreword to the memorial issue for Professor Roberto Marassi

Journal of Solid State Electrochemistry -     

Teucrium polium (L.): Phytochemical Screening and Biological Activities at Different Phenological Stages

The aim of the present study was to investigate the changes in the content of phytochemical compounds and in vitro antioxidant, antibacterial, and anti-inflammatory activities of Teucrium polium L. aerial parts and root methanolic extracts at different phenological stages (vegetative, flowering, and seeding). The T. polium extracts were analyzed using gas chromatography–mass spectrometry (GC-MS), and their antioxidant properties were tested with the 2,2-diphenyl-1-picrylhydrazyl (DPPH), nitric oxide (NO), ferrous ions (Fe²⁺), and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) methods. Forty-nine compounds were identified with the majority of germacrene D, t-cadinol, β-pinene, carvacrol, bicyclogermacrene, α-pinene, and limonene. The results show that the extracts significantly differ between different phenological stages of the plant material used in terms of the phytochemical composition (total phenolic compounds, total flavonoids, total alkaloids, and total saponin contents) and bioactivities (antioxidant, antibacterial, and anti-inflammatory) (p < 0.05). The highest total contents of phenolics (72.4 ± 2.5 mg gallic acid equivalent (GAE)/g dry weight), flavonoids (36.2 ± 3.1 mg quercetin equivalent (QE)/g dry weight), alkaloids (105.7 ± 2.8 mg atropine equivalent (AE)/g dry weight), and saponins (653 ± 6.2 mg escin equivalent (EE)/g dry weight), as well as antioxidant, antibacterial, and anti-inflammatory activities, were measured for the extract of the aerial parts obtained at the flowering stage. The minimum inhibitory concentration (MIC) values for the extracts were varied within 9.4–300 µg/mL, while the minimum bactericidal concentration (MBC) values were varied within 18.75–600 µg/mL. In addition, they were more active on Gram-positive bacteria than Gram-negative bacteria. The data of this work confirm that the T. polium extracts have significant biological activity and hence can be used in the pharmaceutical industry, clinical applications, and medical research, as well as cosmetic and food industries.