Thermal decomposition of Cd(CH3COO)2·2H2O studied by a coupled TG-DTA-MS method

The thermal decomposition of cadmium acetate dihydrate in helium and in air atmosphere has been investigated by means of a coupled TG-DTA-MS method combined with X-ray diffraction analysis. Dehydration of Cd(CH₃COO)₂·2H₂O is a two-stage process with Cd(CH₃COO)₂·H₂O as intermediate. The way of Cd(CH₃COO)₂ decomposition strongly depends on the surrounding gas atmosphere and the rate of heating. CdO, acetone and CO₂ are the primary products of decomposition in air. In helium decomposition goes by two parallel and consecutive reactions in which intermediates, Cd and CdCO₃, are formed. Metallic cadmium oxidizes and cadmium carbonate decomposes giving CdO. Some of the metallic cadmium, depending on the heating rate and the concentration of oxygen, evaporates. Acetone is partially oxidized in secondary reactions with oxygen. This revised version was published online in July 2006 with corrections to the Cover Date.     

Domain-wall energy in sintered Nd15Fe77B8 permanent magnet

From measurements of the magnetic domain widthsD versus grain thicknessL, we have determined the domain wall energy in the demagnetized state for a sintered Nd₁₅Fe₇₇B₈ magnet: = 56 erg/cm². Using this wall energy and the published magnetocry-stalline constantK ₁=4.9×10⁷ erg/cm³, we have calculated the exchange constantA=4.0×10^–6 erg/cm, domain wall thickness _B=89 Å, and the critical diameter for single domain particlesD _c=0.67 m.     

Synthesis of Functionalized (2-Thienylcarbonyl)thiazoles and 4-(2-Thienyl)pyridines by Reaction of (2-Thienylcarbonyl)thioacetanilides and their Enamine Derivatives

Summary. The condensation of two molecules of 2-(2-thienylcarbonyl)thioacetanilides catalyzed by piperidine yielded thiazole derivatives as confirmed by X-ray crystal structure analysis. The reaction of malononitrile with 3-morpholino-3-(2-thienyl)acrylic acid thioanilides furnished 6-amino-1-aryl-4-(2-thienyl)-1,2-dihydro-2-thioxopyridine-5-carbonitriles. A similar reaction of malononitrile with 3-morpholino-3-(2-thienyl)acrylic acid anilides provided 2-oxopyridine-5-carbonitriles.     

Synthesis and characterization of metal polycarboxylates constructed from lanthanides(iii) and 1,2,4,5-benzenetetracarboxylic acid

The complexes of yttrium(III) and lanthanides(III) with 1,2,4,5-benzenetetracarboxylic acid were prepared as crystalline solids of the general formula Ln₄(C₁₀H₂O₈)₃⋅14H₂O. They are insoluble in water. On heating in air or inert gas atmosphere all compounds lose water molecules; next anhydrous compounds decompose to oxides. The yttrium complex and heavy lanthanide (from Ho to Lu) ones crystallize in monoclinic crystal system. The dehydration does not change the crystal structure of the compounds.     

几个金属卤素簇的合成与性能研究

The hydrothermal reaction of CuBr2 and CuBr with phen·H2O （phen= 1,10-phenanthroline） in a molar ratio of 1：1：1.5 gave birth to the first copper-halo cationic cluster [Cu2^Ⅱ Cu2^Br4 （phen）4 ] ^2＋（1） with tetranuclear anionic cluster [Cu4Br6]^2-. Changing the precursors or their molar ratios, two mononuclear complexes [Cu（phen）2Br]Br·H2O （2） and [Ni（phen）3][CuCl2]2 （3） as well as two unusual copper-halo chains found in polymers [Cu2Br2（phen）]∞ （4） and [Cu^ⅡCu3^ⅠBr2Ⅰ3 （phen）2 ]∞ （5） were obtained. The （Cu2Br2）∞ chain of 4 looks like a linearar ray of hexagons based on fused Cu3Br3 units, and the linear （Cu3Ⅰ3Br^-）∞ chain of 5 is an alternate combination of the rhombic Cu2I2 cores and the Cu4I4Br2^2- units. In addition, the hydrothermal reaction of CuBr2 with NA（NA=nicotinic acid） or INA （INA =isonicotinic acid） resulted in the syntheses of two compounds [CuBr（NA）] （6） and [CuBr（INA）]∞（7） containing staircase chain. Among them the third-order non-linear optical properties of 2, 5, 6 and 7 were investigated and all exhibit the reverse saturable absorption （α2〉0） and self-defocusing performance （n2〈0）.     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

Photogeneration and quenching of reactive oxygen species by urocanic acid

Urocanic acid, UCA, is characterized by two electronic transitions in the UV-B (280-320 nm) which comprise its broad absorption spectrum and give rise to wavelength-dependent isomerization quantum yields. The absorption spectrum of UCA extends into the UV-A (320-400 nm). Given the UV-A component of sunlight is significantly greater than the UV-B component it is hypothesized even weak UV-A photochemistry of UCA could be important for in vivo responses to UV radiation. Degenerate pump-probe experiments performed on t-UCA at several wavelengths in the UV-A reveal an excited-state absorption that undergoes a rapid, approximately 1 ps decay. Photoacoustic experiments performed on both the cis and trans isomers reveal the formation of a long-lived intermediate following UV-A excitation. The efficiency and action spectra for this latter photoactive process are presented and are similar for both isomers of UCA. Cholesterol hydroperoxide assays designed to investigate the nature of the UV-A photoreactivity of t-UCA confirm the production of reactive oxygen species. The bimolecular rate constant for the quenching of singlet oxygen by t-UCA is determined to be 3.5 x 10(6) M(-1) s(-1). Taking into consideration recent theoretical calculations and jet expansion studies of the electronic structure of gas-phase t-UCA, a model is proposed to explain the isomerization and photoreactivity of t-UCA in solution over the UV-A region.     

The polymorphic transformations of cobalt molybdate

Polymorphic transformations of CoMoO₄ were studied by means of high temperature X-ray measurements within the temperature range 25–1200°C. On heating phase a obtained from low temperature modification b a new modification a′ was discovered. Phase a obtained by thermal decomposition of solvated α-CoMoO₄ shows different behaviour. At 700–930°C depending on the conditions of preparation it transforms irreversibly into still another modification a″. On cooling, a mixture of phases a + a″ is obtained, the presence of a″ being responsible for the explosionwise transition into b, observed around the room temperature.     

Prediction of adsorption of organic component and water vapour mixture onto activated carbon

A simple isotherm equation is derived for the adsorption of an organic component onto activated carbon in presence of water vapour. The theoretical results are compared with experimental data for toluene-water vapour-activated carbon, which were published byRipperger andGermerdonk [10].

---

Vorhersage der Adsorption einer organischen Komponente und Wasserdampf an Aktivkohle

Zusammenfassung Es wird eine einfache Adsorptionsisotherme abgeleitet, welche die gleichzeitige Adsorption eines organischen Stoffes und Wasser an Aktivkohle beschreibt. Die theoretischen Ergebnisse werden mit experimentellen Resultaten vonRipperger undGermerdonk [10] für Toluol-Wasser-Aktivkohle verglichen.

---

Symbols a _i adsorbate concentration in adsorbent, kg/kg of carbon - a _0i monolayer capacity, kg/kg of carbon - b _i kinetic parameter of theLangmuir equation - E _j adsorption energy in thej-th layer - i i-th component (1 — water vapour, 2 — organic compound) - j j-th layer - m number of layers - n number of adsorbed components - p partial pressure, Pa - p* saturation partial pressure, Pa - p _C water vapour partial pressure at begining of capillary condensation, Pa - surface coverage     

Phase equilibria in the ternary system PbO−P2O5−PbCl2

Journal of Thermal Analysis and Calorimetry - In the ternary system PbO?P2O5?PbCl2, the partial ternary system Pb5Cl2O4?Pb3Cl2O2?Pb10(PO4)6Cl2 was examined by thermal,...