Sr and stable strontium in bones of wild, herbivorous animals from Poland

Activity concentration of ⁹⁰ Sr and stable strontium concentration was analysed in 42 samples of animal (deer, roe-deer, elk and boar) bones, which mostly originated from north-eastern Poland. Strontium separation was performed by extraction chromatography. Determination of chemical yield was controlled by means of stable Sr determination using atomic spectrometry at the beginning and at the end of the separation procedure. Equilibrated ⁹⁰ Sr and ⁹⁰ Y activity was measured using a liquid scintillator spectrometer. Stable strontium range was from 55.4±1.7 ppm to 91.8±4.5 ppm, the mean was 71.84 ppm with a standard deviation (SD) of 9.31 ppm. The mean recovery of strontium was 26.7% with SD = 16.1%. The maximum activity of ⁹⁰ Sr, equal to 629±13 Bq/kg (ash) was found for a deer sample from Augustów Primeval Forest. In average, deer show the highest radiostrontium level, followed by roe-deer, elk and the lowest level were observed for boar. Differences between boar and deer or roe-deer are significant in terms of Kruskal-Wallis statistical test. Animal bones from north-eastern Poland showed about twice the mean concentration of ⁹⁰ Sr, compared to those of south-central Poland, but the difference was found not significant. Activities observed in roe-deer bones suggest the deposition of a concentration of 1.9 to 3.5 kBq/m² in the average of Chernobyl-origin ⁹⁰ Sr in 1986 in north-eastern Poland.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Incorporation of Na(+),K(+)-ATP-ase into the thiolipid biomimetic assemblies via the fusion of proteoliposomes

The black lipid membranes (BLMs) are artificial membrane systems that have been widely used in the study of different biological processes. In this paper the planar bilayer lipid membranes have been used to study the behavior of thiolipid molecules-dipalmitoyl-phosphatidyl-ethanolamine-mercaptopropionamide (DPPE-MPA) and cholesteryl 3-mercaptopropionate (Chs-MPA)-as compared to classical BLM made of natural lipids. We present our experiments on black thiolipid bilayer (BTM) formation from a thiolipid solution and basic results of pump currents generated by sodium-potassium pump-Na(+),K(+)-ATP-ase-introduced to such bilayer systems via proteoliposome adsorption with subsequent fusion. Our results imply that no substantial difference exists between BLMs formed from classical lipids and those made from thiolipids used in this study. The same thiolipid molecules were subsequently used for the formation of covalently bound, tethered bilayer lipid membranes (t-BLMs) on polycrystalline gold electrodes. Similarly, as in the case of BLMs, we took advantage of proteoliposome adsorption/fusion to obtain a t-BLM system with reconstituted enzyme. The vesicle fusion on hydrophobic or hydrophilic substrates is one of the main ways to obtain a bilayer system with incorporated biological species. In this paper we present also our preliminary results of electrochemical experiments using rapid solution exchange technique on such t-BLMs systems and their comparison with painted solid supported membranes (SSMs) and BLMs. We have also followed the process of vesicles fusion onto thiolipid monolayer by means of in situ atomic force microscopy in tapping mode (TM-AFM). On the basis of these experiments, we conclude that DPPE-MPA and Chs-MPA molecules used in our experiments preserve lipid properties, allowing for at least partial reconstitution of Na(+),K(+)-ATP-ase into such t-BLMs. On the other hand, the relatively compact organization on polycrystalline gold and the hydrophobic nature of the first monolayer of tethered thiolipids slows down the proteoliposome fusion onto such monolayers and consequently hinders the protein insertion. However, this effect can be overcome by mechanical stimulus that facilitates proteoliposome delamination onto the self-assembled monolayer.     

Intrinsic and extrinsic factors in anion electron-stimulated desorption: D- from deuterated hydrocarbons condensed on Kr and water ice films

The results of D(-) ion desorption induced by 3-20 eV electrons incident on condensed CD(4), C(2)D(6), C(3)D(8), C(2)D(4), and C(2)D(2) are presented. These compounds were deposited in submonolayer amounts on the surfaces of multilayer solid films of Kr and nonporous and porous amorphous ice. While desorption of the D(-) anions proceeds via well-known processes, i.e., dissociative electron attachment (DEA) and dipolar dissociation, significant perturbations of these processes due to presence of the different film substrates are observed. We have shown that it is possible to distinguish between the character and nature of these perturbations. The presence of the nonporous ice perturbs the D(-) desorption intensity by affecting the intrinsic properties of the intermediate anion states through which dissociation proceeds. On the other hand, the presence of the porous ice introduces extrinsic effects, which can affect electron energy losses prior to their interaction with the hydrocarbon molecule and/or the energies and intensities of the fragment species after dissociation. Simple mechanisms responsible for the observed variations in the intensities of desorbed anionic signals are proposed and discussed. Electron transfer from transient anion states to electron states of the substrate film or nearby hydrocarbon molecules appear as the most efficient mechanism to reduce the magnitude of the DEA process.     

Fine tuning the structure of the Cu2+ complex with the prion protein chicken repeat by proline isomerization

The interaction between the single hexarepeat unit of chicken prion protein [ChPrP(54-59)] and Cu(II) was investigated by NMR, finding different coordination modes for the trans/trans and cis/trans isomers.     

Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates

Surface properties of the binary mixed systems of decyl- and dodecylpyridinium chloride or bromide and sodium pentyl- and heptylsulfonate have been investigated. The surface tension of solutions of equimolar mixtures of surfactants and individual surfactants was measured, and the composition of mixed monolayers and surface interaction parameter β were calculated with the regular solution theory. Our results indicate that the properties of mixed films depend on both ionic strength and the kind of added inorganic electrolyte. With the increase of inorganic electrolyte concentration, the content of more surface active ions in the adsorption films enhances and is the highest in the presence of NaI and the smallest when solutions contain NaCl. Mutual interactions in mixed adsorbed films were found to be attractive. However, the strength of interaction weakens with the increase of ionic strength and depends on the kind of inorganic ions in the order: Cl⁻>Br⁻>I⁻.     

Application of the extended RSA models in studies of particle deposition at partially covered surfaces

This paper reviews the application of the extended random sequential adsorption (RSA) approaches to the modeling of colloid-particle deposition (irreversible adsorption) on surfaces precovered with smaller particles. Hard (noninteracting) particle systems are discussed first. We report on the numerical simulations we performed to determine the available surface function, jamming coverage, and pair-correlation function of the larger particles. We demonstrate the effect of the particle size ratio and the small particle surface coverage. We found that the numerical results were in reasonable agreement with the formula stemming from the scaled-particle theory in 2D with a modification for the sphere geometry. Next, we discuss three approximate models of adsorption allowing electrostatic interaction of colloid particles at a charged interface, employing a many-body superposition approximation. We describe two approaches of the effective hard-particle approximation next. We demonstrate the application of the effective hard-particle concept to the bimodal systems and present the effect of electrolyte concentration on the effective particle size ratio. We present the numerical results obtained from the theoretical models of soft-particle adsorption at precovered surfaces. We used the effective hard-particle approximation to determine the corresponding simpler systems of particles, namely the system of hard spheres and the system of hard discs at equilibrium. We performed numerical computations to determine the effective minimum particle surface-to-surface distance, available surface function, jamming coverage, and pair-correlation function of the larger particles at various electrolyte ionic strengths and particle size ratios. The numerical results obtained in the low-surface coverage limit were in good agreement with the formula stemming from the scaled-particle theory with a modification for the sphere geometry and electrostatic interaction. We compared the results of numerical computations of the effective minimum particle surface-to-surface distance obtained using the 2D, 3D, and curvilinear trajectory model. The results obtained with the 3D and curvilinear trajectory models indicate that large-particle/substrate attractive interaction significantly reduces the kinetic barrier to large, charged-particle adsorption at a surface precovered with small, like-charged particles. The available surface function and jamming-coverage values predicted using the simplified 3D and the more sophisticated curvilinear trajectory models are similar, while the results obtained with the 2D model differ significantly. The pair-correlation function suggests different structures of monolayers obtained with the three models. Unlike the three models of the electrostatic interaction, both effective hard-particle approximations give almost identical results. Results of this research clearly suggest that the extended RSA approaches can fruitfully be exploited for numerical simulations of colloid-particle adsorption at precovered surfaces, allowing the investigation of both hard and soft-particle systems.     

Einfluß der Vibration auf die Geschwindigkeit der Saccharosekristallisation

The influence of the vibration amplitude on the crystallization rate of saccharose with constant vibration frequency of 100 Hz is investigated. Supersaturation was low (1.05), temperatures 40, 60, and 80 °C. Increase of amplitudes 1 up to 4 mm positively influenced the crystallization rate (by 45%) in solutions of high purity and low temperature. At 80 °C the increase lay at about 20%. With low purity solutions no acceleration was observed. – The apparatus and methods of measuring are described.