Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Glycoprotein synthesis as a function of epithelial cell arrangement: biosynthesis and release of glycoproteins by human breast and prostate cells in organ culture.

We demonstrate that a technique is available to investigate glycoprotein synthesis in organ cultures of human breast and prostate surgical specimens where the 3-dimensional epithelial cell arrangement remains intact. Malignant breast and prostate epithelium maintained their capacity to synthesize glycoproteins for at least 3 days as followed by the incorporation of [3H]glucosamine into macromolecules. Over 70% of incorporation was by malignant cells as judged by autoradiography. Labeled glycoproteins were released into glandular lumina and consequently into the culture fluid. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed predominantly one group of macrmolecules released with an apparent molecular weight of 48,000 +/- 6,000 daltons. This glycoprotein was found in all of the breast specimens studied, which included 1 medullary, 1 infiltrating lobular, and 8 infiltrating duct carcinomas. The pattern was independent of the availability of estrogen receptors. A similar glycoprotein was also observed in the culture media from a Grade I and a Grade II well-differentiated infiltrating prostate carcinoma. Incorporation was below the level of detection in 4 of 6 cases of benign prostatic hyperplasia. A more complex pattern of labeled glycoproteins was found in the media of a Grade II and a Grade III poorly-differentiated prostate carcinoma. The established human mammary carcinoma cell line MCF-7 synthesized and released a similar 48,000 molecular weight glycoprotein but additional components with larger molecular weights were also released. An intriguing interpretation that 3-dimensional tissue integrity restricts some glycoprotein synthesis is discussed. Cells grown in 2-dimensional monolayers could escape from such a topographic restriction and express additional families of glycoproteins.     

UV-VIS spectroscopic study of interaction and transformation of allyl alcohol on zeolites HZSM-5

Formation of alkenylcarbenium ions has been proved during transformation of allyl alcohol on zeolite HZSM-5.

---

HZSM-5.

     

Fluorescence of tryptophan-containing peptides on paper or silica gel after treatment with formaldehyde, formaldehyde-ozone or formaldehyde-hydrochloric acid.

Sensitive and specific procedures for the chromatographic detection of tryptophan and tryptophan-containing peptides are described. Formaldehyde gas induces strong and characteristic fluorescence from tryptophan and peptides with NH2-terminal tryptophan residues on silica gel. On filter-paper, the detection of small amounts of these compounds requires the additional use of an oxidant, such as ozone. Treatment with formaldehyde-hydrochloric acid was used as a method for inducing fluorescence from tryptophan-containing peptides regardless of the position of the tryptophan residue in the peptide molecule. This reaction is useful for the chromatographic demonstration of small amounts of such peptides on both paper and silica gel. The spectral properties of the fluorophores of such tryptophan-containing peptides are distinctive and serve to distinguish them from all other known biogenic compounds that are capable of giving fluorescence with formaldehyde.     

Intrinsic and extrinsic factors in anion electron-stimulated desorption: D- from deuterated hydrocarbons condensed on Kr and water ice films

The results of D(-) ion desorption induced by 3-20 eV electrons incident on condensed CD(4), C(2)D(6), C(3)D(8), C(2)D(4), and C(2)D(2) are presented. These compounds were deposited in submonolayer amounts on the surfaces of multilayer solid films of Kr and nonporous and porous amorphous ice. While desorption of the D(-) anions proceeds via well-known processes, i.e., dissociative electron attachment (DEA) and dipolar dissociation, significant perturbations of these processes due to presence of the different film substrates are observed. We have shown that it is possible to distinguish between the character and nature of these perturbations. The presence of the nonporous ice perturbs the D(-) desorption intensity by affecting the intrinsic properties of the intermediate anion states through which dissociation proceeds. On the other hand, the presence of the porous ice introduces extrinsic effects, which can affect electron energy losses prior to their interaction with the hydrocarbon molecule and/or the energies and intensities of the fragment species after dissociation. Simple mechanisms responsible for the observed variations in the intensities of desorbed anionic signals are proposed and discussed. Electron transfer from transient anion states to electron states of the substrate film or nearby hydrocarbon molecules appear as the most efficient mechanism to reduce the magnitude of the DEA process.     

Estimating measurement uncertainty in an afternoon. A case study in the practical application of measurement uncertainty

The ISO/IEC 17025:1999 standard requires chemical testing laboratories to have an estimate of the uncertainty of their measurements. This is a new requirement for many laboratories and there is confusion as to how to estimate uncertainty. Concerns have been raised about the time and effort required to obtain uncertainty estimates.Uncertainty budgets were prepared for the measurement of benzene, toluene, ethyl benzene and xylenes (BTEX) in water using purge and trap coupled with GC/MS. A time limit of one working afternoon (2 pm–5.30 pm) was imposed for preparing the uncertainty estimate. Details of the uncertainty estimate for toluene are described.The method in question had been in routine use for several years and the laboratory held third party (NATA) accreditation for the test. Consequently a considerable amount of performance data was readily available. Relevant information was extracted from the documented test method, validation data, instrument calibration and from routine quality control. This data was combined according to the principles of the ISO Guide to the Expression of Uncertainty, as promulgated in the Eurachem document "Quantifying Uncertainty in Analytical Measurement."The uncertainty estimates were compared to estimates obtained from generalised empirical models (the Horwitz and Lowthian equations), and from interlaboratory studies of this analysis.A traceability chain from routine measurements to the SI units of metre, kilogram and mole is described.Realistic and useful uncertainty estimates were obtained with a few hours work using data extant in the laboratory.     

Preparation of trout liver microsomes for iron speciation in P-450 enzymes by AE–FPLC with ICP–(ORS)MS detection

Cytochromes P-450 are members of a superfamily of hemoproteins involved in the oxidative metabolism of various physiological and xenobiotic compounds in eukaryotes and prokaryotes. The multiplicity of this group of enzymes has been widely studied by chromatographic techniques, mainly high-performance liquid chromatography (HPLC). Because these enzymes are membrane-bound proteins, sample preparation for chromatographic separation of P-450 enzymes requires a solubilization step. The sample-preparation procedures are critical, because detergents affect not only the efficiency of protein solubilization but also their further chromatographic resolution. Trout liver microsomes have been taken here as a model sample to investigate iron speciation in cytochrome P-450. Trouts were treated intraperitoneally with -naphthoflavone, a potent inducer of some P-450 enzymes, and a microsomal suspension containing 7.4±0.1 nmol mL^–1 P-450 enzymes was obtained by ultracentrifugation. Lubrol PX was selected as detergent for solubilization, resulting in about 90% solubilization recovery. The solubilized cytochromes P-450 were further separated by AE–FPLC, with UV detection, or coupled to ICP–MS with an octapole reaction system, ICP–(ORS)MS (monitoring Fe signals at masses 54, 56, and 57). A sampling procedure and chromatographic conditions are developed and were successfully applied to iron speciation in trout liver P-450 enzymes. ICP–(ORS)MS detection of P-450 enzymes is Fe-specific and so will give accurate information on the prosthetic group of the protein, which can constitute an advantageous alternative to classical methods for detection of these hemoproteins.     

Analysis of organic acids in wines by Fourier-transform infrared spectroscopy

Fourier-transform infrared (FTIR) spectroscopy has been a major point of development in many wine laboratories in recent years. It enables almost instant analysis of several properties of wine, usually with very good precision and accurate results. Nevertheless, validation procedures should not be forgotten and should be fully performed. Recovery experiments were performed by spiking wine samples with different amounts of organic acids (tartaric, malic, lactic, acetic and citric—the most prominent in wines). After FTIR analysis of the total acidity and of each organic acid concentration, recoveries were calculated. For total acidity recovery results were, in general, good and very close to 100% (64–111%). On the other hand, for individual organic acid concentrations, the recovery results were lower than 100% (11–73%) for all spiking additions. These results could be explained by spectroscopic interferences between the organic acids. Because they have similar infrared spectra, it is not easy to distinguish between them and, therefore, to achieve accurate calibration. When total acidity, with a different infrared spectrum from the other abundant compounds in the wine, was taken as a single property the recovery results were acceptable.     

High accuracy analysis by isotope dilution mass spectrometry using an iterative exact matching technique

The selection of an appropriate isotope dilution mass spectrometry technique for the practical application of this potentially primary method of analysis is highly important. The NARL approach for the application of the exact matching double isotope dilution mass spectrometry technique developed by Henrion is presented. NARL's approach utilises exact matching to minimise the effect of measurement biases within the method but also includes the thorough examination of all other biasing factors. The approach has been successfully tested in international CCQM intercomparisons with other national metrology institutes.