Quantitative characterization of chaotic instabilities in semiconductors

A method for quantitative characterization of chaotic dynamical systems is discussed. An electronic instrument for determining the number of independent variablesk ^*, involved in the motion, is described. It allows one to obtain these in real time from a single observable. The suggested technique has been applied to quantification of strange attractors underlying chaotic instabilities in semi-insulating GaAsCr, and n-Ge, irradiated with high energy electrons. In n-Ge, for instance, the measured numbersk ^* range from 2 to 4 depending on control parameters. These measurements reveal the highly deterministic nature of the observed chaotic oscillations. The physical mechanisms responsible for the current instabilities and chaotic behaviour are discussed.     

Mössbauer study of iron reduction in hematite containing mineral originated from Aswan area in Egypt

Mössbauer spectroscopy was used to study iron reduction in mineral originated from Aswan area in Egypt. The Mössbauer spectra of samples heat treated at 1000 °C in hydrogen atmosphere show a gradually reduction process of hematite. The main phase of sample aged for 1 h is magnetite, while alpha-iron as well as some silicates and wustite type oxide can be detected in sample aged for 3 h. Further aging of sample results in dissolution of alloying elements /Si, Al/, being present in the samples. This process starts already in samples aged at 1000 °C for 4 h, but it is more expressive in minerals heat treated at 1200 °C or 1300 °C, when all paramagnetic phases disappeared.     

Einige Gesetzmäßigkeiten der spontanen Umwandlung der Wasserstofform des Montmorillonits in die Aluminium-form

Ohne Zusammenfassung     

Aggregation des menschlichen Serumalbumins unter den Bedingungen der W ärmedenaturierung

Ohne Zusammenfassung     

Untersuchung der thermischen Eigenschaften von Alkalibenzolsulfonaten

Zusammenfassung Der Einfluß von Atmosphäre, Aufheizungsgeschwindigkeit und Spülgasgeschwindigkeit auf die thermische Zersetzung von Alkalibenzolsulfonaten wurde untersucht. Kristallwassergehalt, Dehydratations-temperatur und -wärme, gegebenenfalls die Zusammensetzung, Art, Temperatur und Wärme der Modifikationsänderungen, Schmelzpunkte und Schmelzwärmen der Verbindungen wurden bestimmt. Die Zersetzung verläuft in zwei Abschnitten. In dem ersten Hauptteil entstehen in Inertgasatmosphäre Diphenyloxid, Diphenyl, Diphenylsulfon, Benzol, Phenol, Thiophenol, Diphenylsulfid, Thiantren, Diphenylenoxid und wahrscheinlich Diphenylensulfid, weiterhin Koks, Schwefeldioxid, Natriumsulfit und wenig Natriumsulfat, Natriumsulfid, Acetylen und Wasser. Im zweiten Hauptzersetzungsvorgang entstehen Natriumsulfid und Kohlenoxid. Die Produkte wurden isoliert und analysiert. Dazu wurden Derivatographie, Differentialthermoanalyse, Gaschromatographie, Infrarotspektroskopie, kontinuierliche thermische Titration und chemische Methoden gemeinsam angewandt.

---

Summary An investigation was made of the influence of the atmosphere, rate of temperature rise, and velocity of the purging gas on the thermal decomposition of alkali benzene sulfonates. The crystal water content, the dehydration temperature and heat, and if need be the composition, the kind, temperature, and heat of the modification changes, melting points and heats of fusion of the compounds, were determined. The decomposition proceeds in two stages. In the first main stage (in an inert atmosphere) the resulting compounds include diphenyl oxide, diphenyl, diphenylsulfone, benzene, phenol, thiophenol, diphenyl sulfide, thianthrene, diphenylene oxide and probably diphenylene sulfide; also coke, sulfur dioxide, sodium sulfite and a little sodium sulfate, sodium sulfide, acetylene, water. Sodium sulfide and carbon monoxide are formed in the second main decomposition. The products were isolated and analyzed. Furthermore, use was made of derivatography, differential thermal analysis, gas chromatography, infra red spectroscopy, continuous thermal titration, and chemical methods.

---

Résumé On a étudié l'influence de l'atmosphère, de la vitesse d'échauffement et de balayage du gaz, sur la décomposition thermique des benzène-sulfonates alcalins. On a déterminé la teneur en eau de cristallisation, la température et la chaleur de déshydratation, éventuellement la composition, la nature, la température et la chaleur des changements d'état, les points de fusion et les chaleurs de fusion des composés. La décomposition s'effectue en deux temps. Tout d'abord, en atmosphère inerte, il se forme de l'oxyde de diphényle, du diphényle, de la diphénylsulfone, du benzène, du phénol, du thiophénol, du sulfure de diphényle, du thianthrène, de l'oxyde de diphénylène et probablement du sulfure de diphénylène, et aussi du coke, de l'anhydride sulfureux, du sulfite de sodium et, en moins grande quantité, du sulfate de sodium, du sulfure de sodium, de l'acétylène et de l'eau. Dans une deuxième étape de la décomposition principale, du sulfure de sodium et de l'oxyde de carbone prennent naissance. On a isolé et analysé ces produits. Pour cela, on a utilisé simultanément la dérivatographie, l'analyse thermique différentielle, la chromatographie en phase gazeuse, la spectroscopie infrarouge, le titrage thermique en continu et les méthodes chimiques.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table     

A new class of isoquinoline alkaloids: The indenobenzazepines

The dark yellow indenobenzazepine alkaloids lahorine ($\text{1}$) and lahoramine ($\text{2}$) have been found in $\text{Fumaria}$$\text{parviflora}$ Lam. (Fumariaceae). In a transformation with biogenetic implications, treatment of the spirobenzylisoquinolines dihydrofumariline ($\text{4}$) and dihydroparfumidine ($\text{7}$) with methanesulfonyl chloride and triethylamine in dry THF, followed by iodine oxidation, provided $\text{1}$ and $\text{2}$, respectively.     

Thermodynamic excess quantities in the adsorption of sodium alkylsulfonates at the air-solution interface

Colloid and Polymer Science - Data on the surface tension of sodium alkylsulfonate solutions at different temperatures and surfactant concentrations are presented. By applying the thermodynamic...