High-performance liquid chromatographic/ion-trap mass spectrometric speciation of aquatic mercury as its pyrrolidinedithiocarbamate complexes

Mercury-pyrrolidinedithiocarbamate complexes are first time used for speciation of aquatic mercury with high-performance liquid chromatographic/ion trap-mass spectrometric method utilizing atmospheric pressure chemical ionization (APCI). The separation of the four mercury species was achieved in less than 5 min with a linear gradient profile of aqueous methanol from 70 up to 100% (v/v) in 4th min, isocratic elution at 100% up to 5th min and followed by a negative gradient to 70% in 6th min. The best separation was achieved on a reverse phase Zorbax Eclipse XDB C18 column (50 mm × 2.1 mm i.d., 1.8 μm particle size). The on-column limits of detection (injection volume 1 μL) were 370 pg for methylmercury (MeHg⁺), 280 pg for ethylmercury (EtHg⁺), 250 pg for phenylmercury (PhHg⁺) and 90 pg for inorganic mercury (Hg²⁺) when the data were collected in selective ion monitoring (SIM) mode. A method of isolation and preconcentration of the mercury species using a “home-made” C18 solid phase extraction (SPE) microcolumns was developed to enhance sensitivity of the method. The preconcentration factor as much as 2500 was achieved with on-column complex formation of mercury-pyrrolidinedithiocarbamate. Methanol (100%) was chosen for elution of preconcentrated mercury species. The method was applied for the determination of mercury species in river water samples.     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.     

Polyaniline/montmorillonite nanocomposite thin layers deposited on different substrates

Preparation method of polyaniline/montmorillonite (PANI/MMT) nanocomposite in the form of thin layer deposited on various substrates is optimized in this work to obtain high electrical conductivity. Simple method (i.e. polymerization of anilinium sulfate in the presence of MMT) has been used for the preparation and following four conditions were varied: preparation temperature (T = 10 or 20 °C), preparation time (t = 4 or 6 h), size fraction of MMT (p < 1 or 5 µm), and type of substrate (microscope glass slides, silica glass slides, polyester foils). Therefore, 24 samples were prepared, characterized and their electrical conductivity was compared. Raman spectroscopy and scanning electron microscopy were used for the characterization of the structure of samples. Thickness of layers was measured using atomic force microscopy. Based on the comparison of samples and with respect to the aim of obtaining high electrical conductivity, it was found that the most suitable substrate is polyester foil and preparation conditions are T = 20 °C, t = 6 h, p < 5 µm. To obtain highly conductive layers on glass substrates (although less conductive than layers on foil), preparation time have to be shortened to 4 h.     

Raman study of PANI thin film during long time period in dependence on storage conditions

Conducting polymer polyaniline which is nowadays in forefront of the interest was in our study prepared in a form of thin films from anilinium sulfate by its chemical oxidation using ammonium peroxydisulfate. During the oxidation process, the polyaniline was deposited on glass slides and immersed into reaction mixture. Two sets of polyaniline thin films were prepared with different oxidation times (10, 20, 30, and 40 min). The first set was kept dry in desiccator and the second one was freely exposed to air moisture. Raman spectroscopy, nondestructive technique which is very sensitive to changes in structure of polymers, was used for the characterization of the protonation state of prepared polyaniline thin films. It was found that storage conditions affect the protonation state which in case of samples kept in desiccator is maintained without significant changes for longer time. Raman spectroscopy also revealed the dependence of protonation state on the oxidation time and 10 min proved as not sufficient for the creation of the protonation form of polyaniline.     

Direct Introduction of an Alkylsulfonamido Group on C-sites of Isomeric Dicarba-closo-dodecaboranes: The Influence of Stereochemistry on Inhibitory Activity against the Cancer-Associated Carbonic Anhydrase IX Isoenzyme

Carbonic anhydrase IX (CA IX), a tumor-associated metalloenzyme, represents a validated target for cancer therapy and diagnostics. Herein, we report the inhibition properties of isomeric families of sulfonamidopropyl-dicarba-closo-dodecaboranes group(s) prepared using a new direct five-step synthesis from the corresponding parent cages. The protocol offers a reliable solution for synthesis of singly and doubly substituted dicarba-closo-dodecaboranes with a different geometric position of carbon atoms. The closo-compounds from the ortho- and meta-series were then degraded to corresponding 11-vertex dicarba-nido-undecaborate(1−) anions. All compounds show in vitro enzymatic activity against CA IX in the low nanomolar or subnanomolar range. This is accompanied by clear isomer dependence of the inhibition constant (K_i) and selectivity towards CA IX. Decreasing trends in K_i and selectivity index (S_I) values are observed with increasing separation of the cage carbon atoms. Interactions of compounds with the active sites of CA IX were explored with X-ray crystallography, and eight high-resolution crystal structures uncovered the structural basis of inhibition potency and selectivity.     

Dimerisation Process of Silybin‐Type Flavonolignans: Insights from Theory

Natural polyphenols are known to be oxidized by free radicals, which partially explains the antioxidant properties of a number of these compounds. This oxidation may also be used to synthesise new compounds of biological interest, for example, dimers. The present theoretical study describes the existing experimental evidence showing that silybin and dehydrosilybin [natural polyphenols isolated from milk thistle (Silybum marianum)] form dimers regioselectively. Based on DFT calculations, thermodynamic and kinetic values were computed in order to better understand the physicochemical behaviour of these dimerisation processes. Calculations showed that after H‐atom transfer (from polyphenol to radical), dimerisation could proceed in two steps: 1) bond formation and, when possible, 2) tautomerisation reorganisation. The former step is the limiting step, while the latter is crucial for the process to be thermodynamically favourable (ΔG<0). If this rearrangement is impossible then dimerisation is not feasible, or at least becomes a minor process (e.g., dehydrosilybin dimerisation after H‐atom abstraction from the 3‐OH group). This explains the regioselectivity of polyphenol dimerisation.     

Speciation analysis of mercury in sediments, zoobenthos and river water samples by high-performance liquid chromatography hyphenated to atomic fluorescence spectrometry following preconcentration by solid phase extraction

A high-pressure microwave digestion was applied for microwave-assisted extraction (MAE) of mercury species from sediments and zoobenthos samples. A mixture containing 3 mol L⁻¹ HCl, 50% aqueous methanol and 0.2 mol L⁻¹ citric acid (for masking co-extracted Fe³⁺) was selected as the most suitable extraction agent. The efficiency of proposed extraction method was better than 95% with R.S.D. below 6%. A preconcentration method utilizing a “homemade” C18 solid phase extraction (SPE) microcolumns was developed to enhance sensitivity of the mercury species determination using on-column complex formation of mercury-2-mercaptophenol complexes. Methanol was chosen for counter-current elution of the retained mercury complexes achieving a preconcentration factor as much as 1000. The preconcentration method was applied for the speciation analysis of mercury in river water samples. The high-performance liquid chromatography-cold vapour atomic fluorescence spectrometric (HPLC/CV-AFS) method was used for the speciation analysis of mercury. The complete separation of four mercury species was achieved by an isocratic elution of aqueous methanol (65%/35%) on a Zorbax SB-C18 column (4.6 mm × 150 mm, 5 μm) using the same complexation reagent (2-mercaptophenol). The limits of detection were 4.3 μg L⁻¹ for methylmercury (MeHg⁺), 1.4 μg L⁻¹ for ethylmercury (EtHg⁺), 0.8 μg L⁻¹ for inorganic mercury (Hg²⁺), 0.8 μg L⁻¹ for phenylmercury (PhHg⁺).     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.