Kissinger equation versus glass transition phenomenology

The applicability of the Kissinger equation for the evaluation of apparent activation energy corresponding to glass transition kinetics is examined. Theoretically simulated data based on the generally accepted Tool–Narayanaswamy–Moynihan model were used to represent relevant cases of structural relaxation behavior. The values of the apparent activation energy determined by the Kissinger equation were, despite the linearity of the dependencies, in major disagreement with the original values of ?h ^* used for the simulation of the source data. Furthermore, a large dependence of the ?h _Kis ^* evaluation (performed using the Kissinger equation) on the thermal history of the glass was found. The latter represents an unacceptable systematic error in the methodology, implying the incorrectness of the Kissinger equation usage for the evaluation of “glass transition activation energy”. This study addresses the currently widespread (incorrect) usage of the Kissinger equation for the above-mentioned purpose.     

Offline and online capillary electrophoresis enzyme assays of β-N-acetylhexosaminidase

Enzyme assays of β-N-acetylhexosaminidase from Aspergillus oryzae using capillary electrophoresis in the offline and online setup have been developed. The pH value and concentration of the borate-based background electrolyte were optimized in order to achieve baseline separation of N,N′,N″-triacetylchitotriose, N,N′-diacetylchitobiose, and N-acetyl-d-glucosamine. The optimized method using 25 mM tetraborate buffer, pH 10.0, was evaluated in terms of repeatability, limits of detection, quantification, and linearity. The method was successfully applied to the offline enzyme assay of β-N-acetylhexosaminidase, which was demonstrated by monitoring the hydrolysis of N,N′,N″-triacetylchitotriose. The presented method was also utilized to study the pH dependence of enzyme activity. An online assay with N,N′-diacetylchitobiose as a substrate was developed using the Transverse Diffusion of Laminar Flow Profiles model to optimize the injection sequence and in-capillary mixing of substrate and enzyme plugs. The experimental results were in good agreement with predictions of the model. The online assay was successfully used to observe the inhibition effect of N,N′-dimethylformamide on the activity of β-N-acetylhexosaminidase with nanoliter volumes of reagents used per run and a high degree of automation. After adjustment of background electrolyte pH, an online assay with N,N′,N″-triacetylchitotriose as a substrate was also performed.

Retention Mechanism Studies of Selected Amino Acids and Vitamin B6 on HILIC Columns with Evaporative Light Scattering Detection

The goal of the study was to investigate separation mechanism of selected “essential” amino acids (leucine, isoleucine, threonine, tryptophan, proline, and glycine) and vitamin B6 in hydrophilic interaction liquid chromatography (HILIC) with the evaporative light scattering detection. Chromatographic measurements were made on three different HILIC columns: amide-silica (TSK-gel Amide-80), amino-silica (TSK-gel NH₂-100), and cross-linked diol (Luna HILIC). The retention behaviour of the analytes was investigated as a function of different binary hydro-organic mobile phases containing 10–90 % (v/v) acetonitrile. The compounds studied were separated under isocratic and gradient conditions. The best results of tested biologically active compounds separation were obtained on the TSK-gel NH₂-100 column. TSK-gel NH₂ column showed mixed HILIC–ion-exchange mechanism, the highest separation efficiency and better selectivity and resolution for tested analytes than the other studied column, especially at concentration of water in mobile phase lower than 30 % (v/v). Special attention was dedicated to the study of interactions among the stationary phase, mobile phase and the analytes.

     

Synthesis of Drim-7,9(11)-diene and Its Hydroxylated Derivatives

This article describes a new efficient synthesis of drim-7,9(11)-diene and its hydroxylated derivates from drim-8-en-7-one. Reduction of this ketone with NaBO₄ in the presence of CeCl₃ · 7H₂O afforded regio- and stereoselectively drim-8-en-7β-ol in a high yield. Its dehydration with H₂SO₄ under mild conditions led to drim-7,9(11)-diene. Noncatalytic oxidation of drim-7,9(11)-diene with OsO₄ and the catalytic oxidation with the pair OsO₄–NMO gave, in a high yield, depending on conditions, driman-7β,8β,9α,11-tetraol or its mixture with drim-7-en-9α,11-diol and drim-9(11)-en-7α,8α-diol. Under optimal conditions the total yield of these diols reached 89%. The separate, noncatalytic oxidation of drim-7-en-9α,11-diol and of drim-9(11)-en-7α,8α-diol with OsO₄ afforded driman-7α,8α,9α,11-tetraol.     

Reactions of 2- and 4-pyrones with secondary phosphine chalcogenides: a facile synthesis of functional phosphorylated pyrones

The oxidative cross-coupling between 4-hydroxy-6-methyl-2-pyrone or 3-hydroxy-2-methyl-4-pyrone and secondary phosphine chalcogenides proceeds in CCl₄/Et₃N under mild conditions (20–52 °С, 0.75–10 h) through the hydroxyl group to give O-(6-methyl-2-oxo-2H-pyran-4-yl) diorganylphosphinochalcogenoates or O-(2-methyl-4-oxo-4H-pyran-3-yl) diorganylphosphinochalcogenoates, in high yields.     

Calorimetric determination of the effect of additives on cement hydration process

Possibilities of a multicell isoperibolic-semiadiabatic calorimeter application for the measurement of hydration heat and maximum temperature reached in mixtures of various compositions during their setting and early stages of hardening are presented. Measurements were aimed to determine the impact of selected components?? content on the course of ordinary Portland cement (OPC) hydration. The following components were selected for the determination of the hydration behaviour in mixtures: very finely ground granulated blast furnace slag (GBFS), silica fume (microsilica, SF), finely ground quartz sand (FGQ), and calcined bauxite (CB). A commercial polycarboxylate type superplasticizer was also added to the selected mixtures. All maximum temperatures measured for selected mineral components were lower than that reached for cement. The maximum temperature increased with the decreasing amount of components in the mixture for all components except for silica fume. For all components, except for CB, the values of total released heat were higher than those for pure Portland cement samples.     

Leveraging Material Properties in Fluorescence Anion Sensor Arrays: A General Approach

As the demand for probes suitable for sensor development increases, investigation of approaches that utilize known successful receptors gains in general importance. This study describes a two‐prong approach that can be used as a guide to developing sensors from known receptors. First, the conversion of a simple receptor, calix[4]pyrrole, into a fluorescent probe to establish a ratiometric signal is described. Secondly, the sensors that employ an output from a single ratiometric calix[4]pyrrole probe are fabricated by using poly(ether‐urethane) hydrogel copolymers. These hydrogels are designed to absorb, internalize and transport aqueous electrolytes. A sensor array of ten different poly(ether‐urethane) matrices with varying comonomer proportions were doped with a single probe and were exposed to eight different anions: acetate, benzoate, fluoride, chloride, phosphate, pyrophosphate, hydrogen sulfide, and cyanide, eight urine samples and anti‐inflammatory drugs (NSAIDs). The poly(ether‐urethane) matrices comprise different proportions of anion‐binding urethane moieties and different hydrophilicity given by the ratio between ethylene glycol ether and butylene glycol ether. This diversity in the hydration behavior provides different environment polarity, in which the recognition and self‐assembly processes display enough diverse behavior to allow for unique response of the probe to the analytes. Furthermore, a single probe is shown to recognize eight different aqueous anions and eight urine samples when embedded in ten different polyurethanes in an array that displays 100 % classification accuracy. To demonstrate the potential of the concept for quantitative studies, an estimation of non‐steroidal anti‐inflammatory drugs ibuprofen and diclofenac in water and in saliva was performed. A limit of detection of 0.1 ppm and a dynamic range of 0.1–0.6 and 0.05–60 ppm was observed, respectively. Given the general difficulty of chemosensors to recognize aqueous anions, the fact that one probe recognizes eight different analytes attests to an enormous effect of the polymer environment on the recognition process. This method could be used to generate a variety of sensor arrays for various analyses including species that are difficult to recognize, such as small‐molecule‐ and inorganic anions.     

Mechanistic Dichotomy in the Asymmetric Allylation of Aldehydes with Allyltrichlorosilanes Catalyzed by Chiral Pyridine N‐Oxides

Detailed kinetic and computational investigation of the enantio‐ and diastereoselective allylation of aldehydes 1 with allyltrichlorosilanes 5 , employing the pyridine N‐oxides METHOX ( 9 ) and QUINOX ( 10 ) as chiral organocatalysts, indicate that the reaction can proceed through a dissociative (cationic) or associative (neutral) mechanism: METHOX apparently favors a pentacoordinate cationic transition state, while the less sterically demanding QUINOX is likely to operate via a hexacoordinate neutral complex. In both pathways, only one molecule of the catalyst is involved in the rate‐ and selectivity‐determining step, which is supported by both experimental and computational data.     

Recognition of chiral anions using calix[4]arene-based ureido receptor in the 1,3-alternate conformation

A new type of calixarene-based receptor designed for the recognition of chiral anions was prepared by the introduction of (S)-2-methylbutan-1-ol moieties into the lower rim of calixarene. The immobilization of calixarene skeleton in the 1,3-alternate conformation enabled the construction of a cavity consisting of preorganised ureido functions and chiral substituents in close proximity. This cavity is capable of chiral discrimination of selected anions as demonstrated on d- and l-phenylalaninates.     

A concise approach to CF3-containing furan-3-ones, (bis)pyrazoles from novel fluorinated building blocks based on 2,3-butanedione

1,1,1-Trifluoro-4,5,5-trimethoxyhex-3-en-2-one and lithium (2Z)-1,1,1-trifluoro-5,5-dialkoxy-4-oxohex-2-en-2-olate were synthesized for the first time via direct trifluoroacetylation of 2,3-butanedione acetal derivatives. A simple and effective approach to acetal or acyl substituted CF₃-pyrazoles, 5,5′-bis(trifluoromethyl)-3,3′-bipyrazole, and, to 5-trifluoromethylfuran-3-ones is presented.