Neighboring group participation and rearrangement in hypobromous acid addition to 10β-vinyl-cholestanes

Hypobromous acid addition to the diol $\text{Ia}$ yields two epimeric dibromo 6β,19a-epoxides $\text{III}$ and $\text{IV}$ in a 83:17 ratio. Under the same conditions the 6β-acetoxy derivative $\text{Ib}$ gives three products: $\text{III}$ (46%), its epimer $\text{VII}$ (5%) and the spyrocyclic ketone $\text{V}$ (49%).     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

Mesoionic dimethyl derivatives of some 1,2,4-triazinones. The course of the reaction of 3,5-dimethoxy, 3-methoxy-5-methylthio, 5-methoxy-3- methylthio and 3,5-bis(methylthio)-1,2,4-triazine with methyl iodide

Treatment of 3,5-dimethoxy-1,2,4-triazine ( 1a ) with methyl iodide was found to give depending on the reaction time triazinium iodide 2a , triaziniumolates 4a and 6a as well as methoxytriazinones 7a and 8a . Thermolysis of 2a gave triaziniumolates 4a and 6a . Reaction of 2a , 4a or methoxytriazinone 9a with methyl iodide in acetonitrile yielded as the sole product 6a . Reaction of 3-methoxy-5-methylthio-1,2,4-tri-azine (1b ) with methyl iodide gave triazinium iodide 2b and methylthio triazinone 7b . Hydrolysis of 2a,b afforded 4a . Reaction of 5-methoxy-3-methylthio-1,2,4-triazine ( 1c ) with methyl iodide gave triazinium iodide 2c , triaziniumolate 4b , triazinium iodide 5b and triazinone 8b . Hydrolysis of 2c yielded 4b and its thermolysis gave a mixture of 4b and 5b . Reaction of 2c , 4b and triazinone 9b with methyl iodide afforded 5b . Treatment of 3,5-bis(methylthio)-1,2,4-triazine ( 1d ) with methyl iodide was found to give a mixture of N1 and N2 methiodides 2d and 3d which gave on hydrolysis 4b and 8b , respectively. Methylation of 6-methyl derivatives 1c-g gave analogous results, however the proportions of N1 methylated products were lower and the reaction rates higher in comparison to their respective lower homologues 1a,c,d . The structures of the mesoionic dimethyl derivatives were assigned from uv, ir, ¹H nmr and electron impact mass spectra. The structural assignments were eventually confirmed by quantum chemical calculations of net charge distributions, bond lengths and ipso angles of the C5?O bonds.     

A continuous-flow instrument for the determination of linear polyacrylamide stability

Alkaline hydrolysis of high-molecular-mass (10 MDa) linear polyacrylamide, a widely used replaceable sieving medium for the capillary electrophoresis of DNA fragments and proteins, was investigated. The release rate of ammonia, a product of amide group hydrolysis, was monitored by a high-sensitivity continuous-flow system. The experimental results show a rapid onset of hydrolysis at a temperature of 70 degrees C. While the degree of 1 h hydrolysis was evaluated to reach about 16% at 70 degrees C and pH 13, it drops to 5% at 50 degrees C and pH 12.5.     

Rhenium-to-benzoylpyridine and rhenium-to-bipyridine MLCT excited states of fac-[Re(Cl)(4-benzoylpyridine)(2)(CO)(3)] and fac-[Re(4-benzoylpyridine)(CO)(3)(bpy)](+): a time-resolved spectroscopic and spectroelectrochemical study

The lowest allowed electronic transition of fac-[Re(Cl)(CO)(3)(bopy)(2)] (bopy = 4-benzoylpyridine) has a Re --> bopy MLCT character, as revealed by UV-vis and stationary resonance Raman spectroscopy. Accordingly, the lowest-lying, long-lived, excited state is Re --> bopy (3)MLCT. Electronic depopulation of the Re(CO)(3) unit and population of a bopy pi orbital upon excitation are evident by the upward shift of nu(CO) vibrations and a downward shift of the ketone nu(C=O) vibration, respectively, seen in picosecond time-resolved IR spectra. Moreover, reduction of a single bopy ligand in the (3)MLCT excited state is indicated by time-resolved visible and resonance Raman (TR(3)) spectra that show features typical of bopy(*)(-). In contrast, the lowest allowed electronic transition and lowest-lying excited state of a new complex fac-[Re(bopy)(CO)(3)(bpy)](+) (bpy = 2,2'-bipyridine) have been identified as Re --> bpy MLCT with no involvement of the bopy ligand, despite the fact that the first reduction of this complex is bopy-localized, as was proven spectroelectrochemically. This is a rare case in which the localizations of the lowest MLCT excitation and the first reduction are different. (3)MLCT excited states of both fac-[Re(Cl)(CO)(3)(bopy)(2)] and fac-[Re(bopy)(CO)(3)(bpy)](+) are initially formed vibrationally hot. Their relaxation is manifested by picosecond dynamic shifts of nu(C(triple bond)O) IR bands. The X-ray structure of fac-[Re(bopy)(CO)(3)(bpy)]PF(6).CH(3)CN has been determined.     

Simultaneous determination of inorganic and organic anions,alkali, alkaline earth and transition metal cations by capillary electrophoresis with contactless conductometric detection

Simultaneous separation of up to 22 inorganic and organic anions, alkali, alkaline earth and transition metal cations was achieved in less than 3 min in the capillary electrophoresis system with contactless conductometric detector. The sample was injected from both capillary ends (dual opposite end injection) and anionic and cationic species were detected in the center of the separation capillary. The parameters of the separation electrolyte, such as pH, concentration of the electrolyte, concentration of complexing agents and concentration of 18-crown-6 were studied. Best results were achieved with electrolytes consisting of 8 mM L-histidine, 2.8 mM 2-hydroxyisobutyric acid, 0.32 mM 18-crown-6 at pH 4.25 or 9 mM L-histidine, 4.6 mM lactic acid, 0.38 mM 18-crown-6 at pH 4.25. Other electrolytes containing complexing agents such as malic or tartaric acid at various concentrations could also be used. The detection limits achieved for most cations and anions were 7.5 - 62 micro gL(-1) except for Ba2+ (90 micro gL(-1)), Cd 2+, Cr 3+ and F- (125 micro gL(-1)), and fumarate (250 micro gL(-1)). The repeatability of migration times and peak areas was better than 0.4% and 5.9%, respectively. The developed method was applied for analysis of real samples, such as tap, rain, drainage and surface water samples, plant exudates, plant extracts and ore leachates.     

Excitation wavelength dependence of the proton-transfer reaction of the green fluorescent protein

Picosecond time-correlated single-photon counting was used to measure the proton-transfer rate of green fluorescent protein (GFP) excited by several wavelengths between 266 and 405 nm. When samples of GFP in water and D2O are excited at short wavelengths, lambda(ex) < 295 nm, the fluorescence properties are largely modified with respect to excitation at a wavelength around 400 nm, the peak of the absorption band of the S0 --> S1 transition of the ROH form of the chromophore. The shorter the excitation wavelength, the longer the decay time of the ROH emission band at 450 nm and the longer the rise time of the RO- emission band at 512 nm. The proton transfer is slower by an order of magnitude and about a factor of 3 when GFP in water and D2O are excited by 266 nm, respectively.     

Porphyrazines with annulated diazepine rings. 2. Alternative synthetic route to tetrakis-2,3-(5,7-diphenyl-1,4-diazepino)porphyrazines: new metal complexes, general physicochemical data, ultraviolet-visible linear and optical limiting behavior, and electrochemical and spectroelectrochemical properties

Following a previous report on the synthesis and physicochemical characterization of a novel class of porphyrazines carrying peripherally annulated seven-membered rings, i.e., tetrakis-2,3-(5,7-diphenyl-1,4-diazepino)porphyrazine [Ph(8)DzPzH(2)].4H(2)O and its metal derivatives [Ph(8)DzPzM].xH(2)O (x = 2-7, M = Mg(II)(H(2)O), Cu(II), and Zn(II)), a new more convenient procedure is reported here, allowing the preparation in high yields of the Li(I) and Na(I) derivatives of formulas [Ph(8)DzPzLi(2)].5H(2)O and [Ph(8)DzPzNa(2)].6H(2)O, which can be directly converted into other metal derivatives under mild conditions (room temperature) and in good yields. The series studied has been extended to include the Mn(II) and Co(II) complexes also reported here for the first time. Physicochemical characterization of the new "diazepinoporphyrazines" was based on fast atom bombardment (FAB) mass spectrometry and X-ray powder patterns, infrared (IR), electron paramagnetic resonance (EPR), and room-temperature magnetic susceptibility measurements. A detailed discussion of the UV-vis spectra emphasizes the role played by the external diazepine rings in electron delocalization through their tautomeric or protonated forms present in neutral, basic, and acidic media. The nonlinear optical effect of optical limiting for the different species [M = 2H, Mg(II)(H(2)O), Mn(II), Co(II), Cu(II), and Zn(II)] has also been measured. It has been observed that the extent of the optical limiting depends on the specific M center. The observed nonlinear optical features are analyzed and discussed in terms of the electronic and magnetic properties exhibited by some of the metal ions and taking into account the model of the excited-state absorption in which the nature of M determines the kinetics of formation of the highly absorbing state of the specific complex examined. As evidenced by the detailed electrochemical and spectroelectrochemical study carried out on this new class of macrocycles, one of the most important aspects is the facilitated electron delocalization for the oxidized and reduced species allowed by a 1H-6Htautomerism taking place on the peripheral diazepine rings.     

Synthesis,characterization and biological activity of two nickel(II) complexes with 6-(2-chlorobenzylamino)purine

Compounds of composition [Ni(L)(H₂O)₂Cl] and [Ni(L)(H₂O)(NO₃)] · EtOH [HL = 6-(2-chlorobenzylamino)purine] have been synthesized and characterized by elemental analyses, i.r. and electronic spectra, magnetic measurements and mass spectroscopy as tetrahedral nickel(II) complexes. The geometry of both complexes has been optimized using molecular mechanics modelling. Although the monoanionic ligand L is potentially bidentate, we assume that the coordination to nickel is via the N₉ atom only. Cytokinin and anti-cancer activities of the complexes were also tested in an Amaranthus cytokinin bioassay and in an in vitro MTT-based cytotoxicity assay, respectively. In human T-lymphoblastic leukemia cell line CCRF-CEM both complexes showed potent cytotoxic activity.     

Olefin metathesis: what have we learned about homogeneous and heterogeneous catalysts from surface organometallic chemistry?

Since its early days, olefin metathesis has been in the focus of scientific discussions and technology development. While heterogeneous olefin metathesis catalysts based on supported group 6 metal oxides have been used for decades in the petrochemical industry, detailed mechanistic studies and the development of molecular organometallic chemistry have led to the development of robust and widely used homogeneous catalysts based on well-defined alkylidenes that have found applications for the synthesis of fine and bulk chemicals and are also used in the polymer industry. The development of the chemistry of high-oxidation group 5–7 alkylidenes and the use of surface organometallic chemistry (SOMC) principles unlocked the preparation of so-called well-defined supported olefin metathesis catalysts. The high activity and stability (often superior to their molecular analogues) and molecular-level characterisation of these systems, that were first reported in 2001, opened the possibility for the first direct structure–activity relationships for supported metathesis catalysts. This review describes first the history of SOMC in the field of olefin metathesis, and then focuses on what has happened since 2007, the date of our last comprehensive reviews in this field.

Surface organometallic chemistry bridges the gap between homogeneous and heterogeneous olefin metathesis catalysts.