Retention and selectivity tests of silica-based and metal-oxide bonded stationary phases for RP-HPLC

Chromatographic properties of silica-, zirconia- and alumina-based columns with octadecyl-, polyethylene glycol- and pentafluorophenylpropyl-bonded stationary phases were tested. Selectivities of nine columns for LC were characterized using chromatographic methods including Walters, Engelhardt, Tanaka and Galushko hydrophobicity and silanol activity tests, measurements of methylene selectivity in various aqueous-methanol and aqueous-acetonitrile mobile phases and of gradient lipophilic capacity as a measure of the effect of the sample hydrophobicity on gradient-elution separations. A semi-empirical interaction indices model, assuming a predominant role of the solvophobic interactions of test compounds with different polarities, was compared with the linear free energy relationships approach taking into account selective polar interactions. The interaction indices model was applied to both non-polar stationary phases bonded on silica, alumina and zirconia supports, and to the non-modified adsorbents in the normal-phase LC. The retention data of isomeric naphthalene disulfonic acids were used to compare the attractive and repulsive ionic interactions of the columns in purely aqueous mobile phases. The results of the hydrophobicity and polarity tests were consistent, and allowed column characterization and classification. Silanol activity was important with octadecyl silica columns, but was relatively insignificant with bonded polyethylene glycol and pentafluorophenylpropyl phases on silica gel support. Polar interactions with the alumina and zirconia support materials significantly affect the retention.     

Structure of sodium glycodeoxycholate micellar aggregates from small-angle X-ray scattering and light-scattering techniques

Small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) measurements were accomplished on sodium glycodeoxycholate (NaGDC) aqueous electrolyte solutions as a function of NaGDC and NaCl concentrations with the aim to determine with satisfactory approximation the NaGDC micellar aggregate structure at a gross molecular level, assuming monodispersity. Different conditions of interparticle interactions by varying ionic strength (NaCl concentration from 0 to 0.70 M) and NaGDC concentration (from 0.02 to 0.10 M) were studied. Smeared scattering intensities and electron pair distance distribution functions, radii of gyration, and aggregate heights are in satisfactory agreement with the corresponding functions calculated using a 2(1) helix as model. It is formed by trimers, each one composed by three NaGDC and nine H2O molecules related by a 3-fold rotation axis, and can be described by a hollow cylinder, probably filled by water molecules, characterized by a conventional radius of 23.7 A and a trimer repeat along the helical axis of 3.6 A. The helix is considerably inhomogeneous since the volume of the cylinder occupied by NaGDC molecules is less than one-third of the total. On the other hand, calculations performed with the average radial electronic density of the helix without water molecules or totally filled by water molecules (a NaGDC/H2O molecular ratio of about 1/50) or by using a three-shell average radial electronic density, independently evaluated on absolute scale, do not show significant differences, thus supporting the helical model. The aggregate size increases for all the samples by increasing either the NaCl or NaGDC concentration. The NaGDC low concentration (0.02 M) samples with NaCl within the range 0.30-0.70 M are characterized by short cylindrical aggregates that do not give rise to sensible interference effects. This assertion is supported by the satisfactory fit between the observed apparent mean hydrodynamic radii and the calculated ones by means of the method of Ortega and Garcia de la Torre (J. Chem. Phys. 2003, 119, 9914), valid for rods with a length-to-diameter ratio > or = 0.1 in dilute solution (noninteracting rods). The NaGDC moderate concentration (0.10 M) samples with NaCl within the range 0.20-0.60 M are characterized by cylindrical aggregates that, in the presence of repulsive Coulombic interactions progressively more and more screened, produce interference effects, due to the hard-body repulsion and attractive forces, but the agreement between observed and calculated SAXS data is satisfactory. The results of the low and moderate NaGDC concentration samples seem to indicate that the aggregation number increase, produced by adding 0.10 M NaCl, is constant within an ionic strength range and occurs by the addition of oligomers formed by trimers. The samples with a variable NaGDC concentration (0.02-0.10 M) at a fixed and high NaCl concentration (0.6 M) contain cylindrical aggregates that give rise to an attractive term effect prevailing on the hard-body repulsive one. The same situation seems to occur in the NaGDC moderate concentration samples.     

Zwitterionic ion chromatography with carboxybetaine surfactant-coated particle packed and monolithic type columns

Both particle packed (25 cm x 0.46 cm I.D. SUPELCOSIL 5 microm C18) and monolithic type (10 cm x 0.46 cm I.D. Merck Chromolith Performance C18) reversed-phase substrates were dynamically coated with a carboxybetaine type zwitterionic surfactant ((dodecyldimethyl-amino) acetic acid) and investigated as stationary phases for use in zwitterionic ion chromatography (ZIC). Investigations into eluent concentration and pH were carried out using KCl eluents containing 0.2 mM of the carboxybetaine surfactant to stabilise the column coatings. It was found that eluent concentration decreased anion retention whilst simultaneously increasing peak efficiencies, which may be due to the dissociation of intra- and inter-molecular salts of the carboxybetaine surfactant under higher ionic strength conditions. The Effect of eluent pH was an increase in anion retention with decreased eluent pH due to the increased protonation of the weak acid terminal group of the carboxybetaine, causing both a relative increase in the positive charge of the stationary phase and less repulsion of the anions by the dissociated weak acid group. The carboxybetaine-coated monolithic phase was applied to rapid anion separations using elevated flow rates and flow rate gradients.     

The sorption of some radiocations on microporous titanosilicate ETS-10

The microporous titanosilicate ETS-10 synthesized from gel with following molar composition: 1.0 Na₂O: 1.49 SiO₂ : 0.2 TiO₂ : 0.6 KF : 1.28 HCl : 39.5 H₂O was subjected to sorption of radioactive cations ¹¹⁵Cd²⁺, ²⁰⁴Hg²⁺, ⁶⁰Co²⁺ and ¹³⁷Cs⁺ (M) from aqueous solution, in the absence of ionic competition. The uptake of these cations on the ETS-10 was compared by means of the distribution coefficient (K_d) versus contact time and sorption capacity (R) at equilibrium. The FT-IR spectra of M-ETS-10 sorption products exhibit a modification of the absorption band, principally at 381 cm^-1.     

Aqueous solubility data for pressurized hot water extraction for solid heterocyclic analogs of anthracene, phenanthrene and fluorene

We report the aqueous solubilities of phenanthrene and several solid three-ring aromatic heterocycles (phenanthridine, acridine, phenazine, thianthrene, phenothiazine, phenoxathiin, phenoxazine, carbazole, dibenzofuran, dibenzothiophene, and 4,6-dimethyldibenzothiophene) at temperatures ranging from 313K to the solute melting point and at a pressure of 5MPa. The data were measured by dynamic saturation method using an in-house-assembled apparatus for pressurized hot water extraction (PHWE). The solute from a known mass of the saturated aqueous solution was transferred to an organic solvent (hexane or toluene), and the organic phase was analyzed by GC/MS. In any of the solutes, the GC/MS records did not indicate any noticeable decomposition within the temperature range of the measurements. The resultant solubilities were converted to activity coefficients of the individual solutes in saturated aqueous solutions, and the results are discussed in terms of temperature and type/number of heteroatoms.     

Internal friction in magnesium reinforced by short Al2O3 fibres after thermal cycling

This paper describes the influence of thermal cycling on the damping behaviour of composites with Mg matrix and two contents (26.0 and 34.1 vol.%) of Saffil short fibres. The composites were prepared by squeeze casting. The logarithmic decrement, as a characteristic of the process responsible for the damping behaviour, was measured after ten thermal cycles between room temperature and an upper temperature. The upper temperature was varied within the range from 100 to 450°C.The strain dependence of the logarithmic decrement can be divided into two regions. A region of strain amplitude independent damping at low strains is followed by a region with amplitude dependent damping at higher strains. The damping level in the strain amplitude independent region depends weakly on the upper temperature of the cycle whereas the values of the logarithmic decrement in the strain amplitude dependent region depend very sensitively on the upper temperature of cycles. The observed experimental data can be explained considering creation of new dislocations during thermal cycling following recovery processes at higher upper temperatures of the cycle.     

Resolving infeasibility in extremal algebras

Two extremal algebras =(B,) based on a linearly ordered set (B, ) are considered: in the maxmin algebra =max, = min and in the maxgroup algebra = max and is a group operation. If a system A x = b of linear equations over an extremal algebra is insolvable, then any subset of equations such that its omitting leads to a solvable subsystem is called a relieving set. We show that the problem of finding the minimum cardinality relieving set is NP-complete in the maxmin algebra already for bivalent systems, while it is polynomially solvable for bivalent systems in maxgroup algebra and also NP-complete for trivalent systems.     

On Highest Weight Modules Over Elliptic Quantum Groups

The purpose of this Letter is to define and construct highest weight modules for Felder's elliptic quantum groups. This is done by using exchange matrices for intertwining operators between modules over quantum affine algebras.     

Investigation of the reduction of methylenequinones by methods of polarography and EPR spectroscopy

Conclusions The polarographic reduction of certain methylenequinones was studied, and the mechanism of the reduction was investigated by the method of EPR spectroscopy.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1656–1658, July, 1970.     

Three-component synthesis of 2-(4-amino-2,5-dihydro-1<Emphasis Type="Italic">H</Emphasis>-imidazol-5-ylidene)malononitriles

2-(4-Amino-2,5-dihydro-1H-imidazol-4-ylidene)malononitriles were synthesized by three-component reaction of tetracyanoethylene, carbonyl compound, and ammonium acetate. The synthesis can be performed in two steps with intermediate isolation of 2-aminoethene-1,1,2-tricarbonitrile, as well as using preliminarily prepard 2-aminoethene-1,1,2-tricarbonitrile and 1,3,5-trisubstituted 2,4-diazapentadienes.