g-Factor of the first 2+ state in theN=82 nucleus138Ba

The 2 ₁ ⁺ level of¹³⁸Ba has been Coulomb excited with a 105 MeV³²S beam. The precession of the gamma ray angular distribution induced by the transient magnetic field when traversing a 2.14 mg/cm² iron foil, has been measured to be 15.6(1.7) mr. A value of g(¹³⁸Ba 2 ₁ ⁺ )=0.72(11) was obtained assuming for the transient field strength the Chalk River calibration. The field parametrization has been checked using the first 2⁺ state in¹⁵⁰Sm as probe. Theg value obtained is sensibly lower than predicted by large scale shell model calculations in a proton subspace. Theg-factor of the first 2⁺ state in¹⁴⁸Sm has been remeasured yieldingg(¹⁴⁸Sm 2 ₁ ⁺ )=0.246(22).     

Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

A novel one-pot conversion of amines to homologated esters in poly(ethylene glycol)

The first deaminative homologation of amines (-CH₂NH₂) to esters (-CH₂CH₂COOEt) in one-pot is reported. The reaction proceeds through, formation of an aldehyde from an amine in the presence of Pd/C as catalyst followed by Wittig reaction and catalytic hydrogenation using poly(ethylene glycol) as the solvent in one-pot.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

Removal of185W,99Mo and125Sb radioisotopes from aqueous solutions using polyamine incorporated polysaccharides

Polyamino group-containing resins act both as chelating ion exchangers and weakly basic anion exchangers depending upon the species in contact in the solution. In the present work, ion exchangers based on polyamine incorporated polysaccharides (cellulose and galactomannan or guaran) have been used for removal of radioisotopes of¹⁸⁵W as WO ₄ ^2– ,⁹⁹Mo as MoO ₄ ^2– and¹²⁵Sb as Sb³⁺ from their separate aqueous solutions. These chelating anion exchangers have been synthesized by reaction of polysaccharides with epichlorohydrin followed by the respective polyamines as nucleophiles in a strongly alkaline medium. WO ₄ ^2– and MoO ₄ ^2– are adsorbed from their aqueous solutions through anion exchange process by chloride form of cellulose-triethylenetetraamine (cellulose-trien), cellulose-tetraethylenepentaamine (cellulose-tetren), guaran-triethylenetetraamine (guar-trien) and guar-tetraethylenepentaamine (guar-tetren) weakly basic anion exchangers. Guar-tetren chelating polymer has been found to be highly selective for¹²⁵Sb isotopes presumably due to the presence of chelating cis-hydroxy and tetren groups in the galactomannan matrix.     

Synthesis and structural characterisation of a novel tris-methylene bridged compound (NO) 4Fe2 Se(μ-CH2)3

The tris-methylene bridged compound (NO)₄Fe₂Se(μ-CH₂)₃ has been isolated. It has been characterised by IR and ¹H, ¹³C, and ⁷⁷Se NMR spectroscopy. Its structure has been determined by single-crystal X-ray diffraction methods. The structure consists of a heavy atom triangle consisting of one Se and two Fe atoms. The Fe-Fe and the two Fe-Se edges are bridged by methylene groups.     

Adsorptive stripping voltammetric determination of chromium in gallium

The electroanalytical chemistry of trace metals has progressed strongly with the development of cathodic stripping voltammetry (CSV) preceded by adsorption collection of organic metal complexes. A sensitive method for the determination of trace amount of chromium in gallium is described. Gallium is dissolved in sodium hydroxide containing hydrogen peroxide. The method is based on the catalytic activity of nitrate ions on the reduction of Cr(III)TTHA (triethylene tetramine-N,N,N',N',N',N'-hexaacetic acid) complex. The sensitivity of this method is further improved by adsorption preconcentration of Cr(III)TTHA complex at a hanging mercury drop electrode (HMDE). The Cr(III) formed at the electrode surface by the reduction of Cr(VI), which is present in the bulk solution, is immediately complexed by TTHA. The adsorbed complex is then reduced at a peak potential of - 1.26 V, and the peak height of Cr(III) reduction is measured. The determination limit was restricted by the amount of chromium present in the reagent blank solution. The method is suitable for the determination of chromium at level as low as 0.2 mug g(-1) (with about 50 mg of sample) and a relative standard deviation of 15%.     

Liesegang rings — Part I

Summary The conditions for the formation of revert type ofLiesegang rings have been studied here. Various systems of rhythmic precipitations of silver chromate are produced in a mixtures of agar and gelatin gels under different environmental conditions. Ring systems of silver, copper and other ferricyanides have also been studied in gelatin gel. The observations show that the cause of the revert systems ofLiesegang rings is the high peptizability of the precipitating matter in the media containing gel and the unreacted ions.

---

Zusammenfassung Die Bedingungen der Bildung des „umgekehrten“ Types vonLiesegang-Ringen wurden untersucht. Verschiedene Systeme rhythmischer F?llung von Silberchromat wurden in einer Mischung von Agar und Gelatinegelen unter verschiedenen Umgebungsbedingungen erzeugt. Ringsysteme von Kupfer, Silber und anderen Ferricyaniden in Gelatine wurden untersucht. Die Beobachtungen zeigen, da? die Ursache für die „umgekehrten“Liesegang-Ringe in der hohen Peptisierbarkeit der Füllsubstanz im gelhaltigen Medium und den noch nicht reagierten Ionen liegt.

     

Extraction of U(VI) by cyanex-272

Extraction of U(VI) from HNO₃, HCl and HClO₄ media using cyanex-272 (bis[2,4,4 trimethyl pentyl] phosphinic acid)/n-dodecane has been carried out. In the case of HNO₃ and HClO₄ media, the distribution ratio (D) value first decreases and then increases, whereas from HCl medium it first decreases and then remains constant with increase in H⁺ ion concentration. At lower acidities, U(VI) was extracted as UO₂(HA₂)₂ by an ion exchange mechanism, whereas at higher acidities as UO₂(NO₃)₂ ^.2(H₂A₂) following a solvation mechanism. The D for U(VI) by cyanex-272, PC-88A and DEHPA at low acidities follows the order cyanex-272 > PC-88A > DEHPA. Also, cyanex-272 was found to extract U(VI) more efficiently than TBP at 2M HNO₃. The effect of diluents on the extraction of U(VI) by cyanex-272 followed the order cyclohexane > n-dodecane > CCl₄ > benzene. The loading of U(VI) into cyanex-272/n-dodecane from 2M HNO₃ has shown that at saturation point, cyanex-272 was 78% loaded. No third phase was observed at the saturation level. The stripping of U(VI) from the loaded organic phase was not possible with water, it was poor with acetic acid and sodium acetate but quantitative with oxalic acid, ammonium carbonate and sodium carbonate.     

Recovery of plutonium and americium from laboratory acidic waste solutions using tri-n-octylamine and octylphenyl-N-N- diisobutylcarbamoylmethylphosphine oxide

Plutonium from acidic waste solutions has been recovered quantitatively using tri-n-octylamine (TnOA) in xylene and americium using a mixture of octylphenyl-N-N- diisobutylcarbamoylmethylphosphine oxide (CMPO) and TBP in dodecane by extraction and extraction chromatographic methods. The Pu ( IV ) TnOA species extracted into the organic phase from higher nitric acid concentrations has been confirmed as (R(3)NH)(2)Pu(NO(3))(6) (where R(3)N = TnOA by employing slope analysis as well as spectrophotometric studies.