Advantages of the iridium permanent modifier in fast programs applied to trace-element analysis of plant samples by electrothermal atomic absorption spectrometry

The application of a fast program combined with the advantages of the iridium permanent modifier is proposed for trace element analysis of plant samples by electrothermal atomic absorption spectrometry (ETAAS). For two volatile elements (Cd, Pb) and two mid-refractory elements (Cr, Ni) it was demonstrated that coating of the platform or of the tube atomization area with Ir is an efficient means of improving the accuracy and precision of results. A detailed study of interference from individual main matrix components and from composite plant matrices has confirmed the usefulness of the whole approach. The validity of the method has been confirmed by analysis of eight reference plant materials.     

Optical properties of silver clusters formed by ion irradiation

Precipitation of silver clusters in silica is achieved by different methods: ion implantation, ion beam mixing of superimposed layers and ion irradiation of films deposited by means of co-sputtering or sol-gel technique. Main features of the nanoparticles depending on the preparation method are investigated by TEM. The optical extinction resonance of these clusters is analysed in terms of sizes and interaction between the clusters on the basis of calculations. We found that resonances in sputtered and gel films with low metal concentrations are well described by plasmon polaritons in isolated clusters and calculations based on Mie theory allow the study of their growth under irradiation. This theory is not appropriate to describe the optical response of silver clusters in silica implanted with Ag concentrations higher than 5 at.% or in ion beam mixed films, because of the interaction between clusters. Using an effective medium model, it is demonstrated that the random dispersion of clusters in implantation films causes fluctuations and, on average, an increase of the clusters polarization. On the contrary, the particular arrangement of the clusters with a bimodal size distribution in ion beam mixed films induces a screening effect between the clusters of largest size. Received 10 January 2002 / Received in final form 26 April 2002 Published online 19 July 2002     

Analytical characterization of a silica gel sorbent with thioetheric sites

The sorption behavior of a newly synthesized silica gel sorbent with thioetheric sites (STS) towards microgram levels of Au(III), Pt(IV) and Pd(II) was studied. Au(III) is quantitatively (>95%) sorbed in the pH region of 1–9. The sorption of Pt(IV) starts at pH 1 and does not exceed 25% in the entire pH region examined. The sorption of Pd(II) starts at pH 7 and reaches 80% at pH 9. The sorption of Au(III) on STS at pH 1 is not affected by milligram amounts of Ni(II), Zn(II), Fe(III), Cu(II), Pb(II), Cd(II) or Co(II). Au(III) is quantitatively eluted with a 5% aqueous solution of thiourea. The adsorption capacity of STS towards Au(III) is 195 mg g⁻¹. The detection limit (DL) of Au(III) (3σ, n = 9) is 25 ng mL⁻¹. The RSD at a level of 10 × DL is about 2%. Solid-phase extraction of trace amounts of Au(III) on the STS sorbent, followed by its flame AAS determination in the eluate was applied to the determination of gold in geological samples. The results obtained for the gold content in the samples were in good agreement with those of the ICP-AES analysis.     

A Convenient Preparation of β-Acetamido Substituted Tryptamine Derivatives

Summary. In view of finding new 5-HT₆ receptor ligands various -acetamido substituted tryptamine and N,N-dimethyltryptamine derivatives were synthesized from a common intermediate. A trimolecular condensation between indole, Meldrums acid and N-phthalimidoacetaldehyde followed by careful deprotection and functional group manipulations were proposed for this purpose.Present address: GEVSM, UMR 7565 CNRS-UHP, Faculté de Pharmacie, F-54001 Nancy Cedex, FrancePresent address: University of Global and National Economy, Studentski Grad Christo Botev, BG-1700 Sofia, Bulgaria     

Infrared study of some synthetic phases of malachite (Cu2(OH)2CO3)-hydrozincite (Zn5(OH)6(CO3)2) series

Synthetic malachite, hydrozincite and five monophasic mixed copper-zinc hydroxycarbonates have been studied by Fourier transform infrared (FTIR) spectroscopy at ambient and liquid nitrogen temperature in the region of 4000-400 cm(-1). The analysis of the spectra reveals that the samples containing up to 20% zinc retain the malachite lattice, thus forming solid solutions. The inclusion of zinc ions in malachite reflects on the positions and intensity of the bands corresponding to the internal modes of the carbonate ion, to the OH librations and to the Me-O interactions. For example, the higher and the lower frequency components of v3 shift to higher and lower frequencies, respectively. The intensity of the bands corresponding to v2 decreases with the zinc content increase. The spectrum of the sample Cu1.31Zn0.69(OH)2CO3 become diffuse and ill-resolved in the region of the Me-O interactions (region below 600 cm(-1)) and the corresponding bands are shifted to lower frequencies due to the weaker Zn-O interactions as compared with those of the copper ions. The internal modes of the carbonate ions in hydrozincite and aurichalcite are assigned and discussed taking into account the site symmetry and factor group symmetry. The OH and OD stretches (matrix-isolated HDO molecules) and the hydrogen bond strengths are interpreted in terms of Me-O interactions (synergetic effect), hydrogen bond angles and different hydrogen bond acceptor strengths of the oxygen atoms from the carbonate ions. It proves that the hydrogen bonds in hydrozincite are stronger as compared with those in malachite, irrespective of both the larger hydrogen bond lengths and the weaker Zn-O interactions in hydrozincite due to the higher hydrogen bond acceptor strength of the non-coordinated oxygen atom and the formation of bifurcated hydrogen bonds.     

Gelatin films with very high surface hardness

Microhardness (H) of gelatin dry cast films was measured in the 100–250°C range. A strong H increase with temperature from 330 MPa up to 450 MPa was observed in the first cycle. The H values reached in the subsequent cycles are higher than those obtained in the preceding ones, surpassing the hardness of all commercial synthetic polymers and soft metals. Results are discussed in terms of crosslinking between side-chain reactive groups.     

Discussion of parameters associated with the determination of arsenic by electrothermal atomic absorption spectrometry in slurried environmental samples

A slurry sampling – fast program procedure has been developed for the determination of arsenic in plants, soils and sediments by electrothermal atomic absorption spectrometry. Efficiencies of various single and mixed modifiers for thermal stabilization of arsenic and for a better removal of the matrix during pyrolysis step were compared. The influence of the slurry concentration, amounts of modifier and parameters of the pyrolysis step on the As integrated absorbance signals have been studied and a comparison between fast and conventional furnace programs was also made. The ultrasonic agitation of the slurry followed by a fast electrothermal program using an Ir/Mg modifier provides the most consistent performance in terms of precision and accuracy. The reliability of the whole procedure has been compared with results obtained after application of a wet digestion method with an HF step and validated by analyzing eleven certified reference materials. Arsenic detection and quantitation limits expressed on dry sample matter were about 30 and 100 μg kg^–1, respectively.     

Fragmentation and erosion of two-dimensional aggregates in shear flow

We consider single two-dimensional aggregates containing glass particles trapped at a water/oil or water/air interface. Two modes for aggregate break-up are observed: break-up by fragmentation into a few parts and break-up by erosion of single particles. We have studied the critical shear rate for these modes as a function of the aggregate size. Two different particle sizes were used. The smaller particles, with a radius of 65 microm, form aggregates that break up predominantly by erosion at a shear rate between 0.5 and 0.7 s(-1). This value hardly depends on the size of the aggregates. The larger particles, with a radius of 115 microm, form aggregates that break by erosion or by fragmentation. In both modes, the critical shear rate again depends only weakly on the size of the aggregates and ranges between 1.6 and 2.2 s(-1). Also the structural changes inside the aggregate before break-up were studied. The aggregate behavior at the water/air and water/oil interfaces is quite similar. The critical shear rate for break up was also modeled. The model shows in both modes a weak dependence of the critical shear rate on the aggregate size, which is consistent with the experimental observations. The kinetics of the erosion process was also modeled and compared with the experimentally obtained time dependence of the aggregate size. The differences in the large and small particle systems can be attributed to the occurrence of friction forces between the particles, which one expects to be much larger for the large particle system, due to the stronger two-particle interaction.     

Synthesis of 3-Aminopyrocatechol via Lithiated Intermediates

We report the synthesis of 3-aminopyrocatechol (7) through electrophilic amination of lithiated pyrocatechol, protected in the form of a ketal. For this purpose the lithiation reaction of protected pyrocatechol (1) was studied. The synthesis of compounds (3) was achieved by the reaction of organolithium derivative (2) and a series of electrophilic reagents. Lithium-t-butyl-N-tosyloxycarbamate (5) was used as the electrophilic aminating reagent. With the cupro derivative (4) the protecting groups in compound (6) are removed in an acid medium by heating in ethanol-HCl solution (4:1).