Isolation and characterization of cellulose nanofibers from banana peels

Cellulose nanofibers were isolated from banana peel using a combination of chemical treatments, such as alkaline treatment, bleaching, and acid hydrolysis. The suspensions of chemically treated fibers were then passed through a high-pressure homogenizer 3, 5, and 7 times, to investigate the effect of the number of passages on the properties of the resulting cellulose nanofibers. The cellulose nanofibers isolated in this study had a dry basis yield of 5.1 %. Transmission electron microscopy showed that all treatments effectively isolated banana fibers in the nanometer scale. The micrographs of the process steps used to isolate the nanofibers revealed gradual removal of amorphous components. Increasing number of passages in the homogenizer shortened the cellulose nanofibers while furnishing more stable aqueous suspensions with zeta potential values ranging from ?16.1 to ?44.1 mV. All the samples presented aspect ratio in the range of long nanofibers, hence being potentially applicable as reinforcing agents in composites. X-ray diffraction studies revealed that homogenized nanofiber suspensions were more crystalline than non-homogenized suspensions. Fourier transform infrared spectroscopy confirmed that alkaline treatment and bleaching removed most of the hemicellulose and lignin components present in the banana fibers. Thermal analyses revealed that the developed nanofibers exhibit enhanced thermal properties. In general, the nanoparticles isolated from the banana peel have potential application as reinforcing elements in a variety of polymer composite systems.     

Mixed solvents for cellulose derivatization under homogeneous conditions: kinetic,spectroscopic, and theoretical studies on the acetylation of the biopolymer in binary mixtures of an ionic liquid and molecular solvents

Rate constants for the acetylation of microcrystalline cellulose (MCC), by ethanoic anhydride in the presence of increasing concentrations of the ionic liquid (IL), 1-allyl-3-methylimidazolium chloride in dipolar aprotic solvents (DAS), N,N-dimethylacetamide (DMAC), and acetonitrile (MeCN), have been calculated from conductivity data. The third order rate constants showed a linear dependence on [IL]. We explain this result by assuming that the reacting cellulose is hydrogen-bonded to the IL. This is corroborated by kinetic data of the acetylation of cyclohexylmethanol, FTIR of the latter compound and of cellobiose in mixtures of IL/DAS, and conductivity of the binary solvent mixtures in absence, and presence of MCC. Cellulose acetylation is faster in IL/DMAC than in IL/MeCN; this difference is explained based on solvatochromic data (empirical polarity and basicity) and molecular dynamics simulations. Results of the latter indicate hydrogen-bond formation between the hydroxyl groups of the anhydroglucose unit of MCC, (Cl^?) of the IL, and the dipole of the DMAC. Under identical experimental conditions, acetylation in IL/DMAC is faster than that in LiCl/DMAC (2.7–8 times), due to differences in the enthalpies and entropies of activation.     

Mullite crystallization using fully hydrolyzed silica sol: the gelation temperature influence

Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite.     

Bioactive Compounds from Pale Ale Beer Powder Attenuate Experimental Colitis in BALB/c Mice

Phenolic compounds (PCs) present in foods are associated with a decreased risk of developing inflammatory diseases. The aim of this study was to extract and characterize PCs from craft beer powder and evaluate their potential benefits in an experimental model of inflammatory bowel disease (IBD). PCs were extracted and quantified from pure beer samples. BALB/c mice received either the beer phenolic extract (BPE) or beer powder fortified with phenolic extract (BPFPE) of PCs daily for 20 days by gavage. Colon samples were collected for histopathological and immunohistochemical analyses. Dextran sodium sulfate (DSS)-induced mice lost more weight, had reduced colon length, and developed more inflammatory changes compared with DSS-induced mice treated with either BPE or BPFPE. In addition, in DSS-induced mice, the densities of CD4- and CD11b-positive cells, apoptotic rates, and activation of NF-κB and p-ERK1/2 MAPK intracellular signaling pathways were higher in those treated with BPE and BPFPE than in those not treated. Pretreatment with the phenolic extract and BPFPE remarkably attenuated DSS-induced colitis. The protective effect of PCs supports further investigation and development of therapies for human IBD.     

Recent Progress in the Development of Indole-Based Compounds Active against Malaria,Trypanosomiasis and Leishmaniasis

Human protozoan diseases represent a serious health problem worldwide, affecting mainly people in social and economic vulnerability. These diseases have attracted little investment in drug discovery, which is reflected in the limited available therapeutic arsenal. Authorized drugs present problems such as low efficacy in some stages of the disease or toxicity, which result in undesirable side effects and treatment abandonment. Moreover, the emergence of drug-resistant parasite strains makes necessary an even greater effort to develop safe and effective antiparasitic agents. Among the chemotypes investigated for parasitic diseases, the indole nucleus has emerged as a privileged molecular scaffold for the generation of new drug candidates. In this review, the authors provide an overview of the indole-based compounds developed against important parasitic diseases, namely malaria, trypanosomiasis and leishmaniasis, by focusing on the design, optimization and synthesis of the most relevant synthetic indole scaffolds recently reported.     

The study of network formation as a cluster-cluster diffusion-limited aggregation process: Modelling of the curing of an epoxy-resin using the Monte Carlo method

The study of network formation during the curing of an epoxy-resin with anhydride and tertiary amine has been carried out by the Monte Carlo method. Both dynamical and structural properties are studied. The model resembles the well known cluster-cluster aggregation: the reaction is modelled as a “geometrical” phenomenon and neglects attractive and repulsive energies except for an excluded volume condition. A reaction occurs always when two active sites are in the vicinity to each other, meaning that the “chemical” processes are taken to be much faster than diffusion (as in diffusion-limited aggregation). Results are presented of two-dimensional square lattice simulations with periodic boundary conditions and are discussed with respect to the proposed mechanism of the curing reaction and to the assumptions of the diffusion-limited nature of the processes. The scope and limitations of such two-dimensional simulations are discussed.     

Orthobromodiphenylmethane Derivatives as Starting Materials for the Total Synthesis of Anthraquinones

In this communication we describe the synthesis of four simple anthraquinones by a five-step sequence, using easily available bromobenzaldehydes and phenyllithium derivatives as starting materials.     

The Influence of Hydrogen Loading Temperature on the Mechanical Strength of Optical Fibers

The influence of hydrogen loading temperature on the mechanical strength of optical fibers is investigated. Fibers subjected to high-pressure hydrogen loading at different temperatures were submitted to bend tests, and the results compared with those for pristine fibers. The Weibull probability distribution function was used to analyze the data of the mechanical bending strength of the fibers. Fiber strength is reduced by the presence of hydrogen, and this decrease is greater for higher hydrogen loading temperatures. The mechanical properties of the polymers used to coat fibers are affected by the hydrogen loading process and also by the increase in temperature. However, there is no evidence of cracks formation that might allow water to penetrate to the surface of the glass. Observation using scanning electron microscopy revealed that the morphology of fractures in nonhydrogen-loaded fibers have distinct fracture characteristics to that of fibers that are hydrogen loaded at 90°C and 120°C.     

From superhydrophobic‐ to superhydrophilic‐patterned poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) architectures as a novel platform for biotechnological applications

The manufacture of three‐dimensional patterned electroactive poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) microstructures with tailored architecture, morphology, and wettability is presented. The patterned microstructures are fabricated using a simple, effective, low cost, and reproducible technique based on microfluidic technology. These novel structures can represent innovative platforms for advanced strategies in a wide range of biotechnological applications, including tissue engineering, drug delivery, microfluidic, and sensors and actuators devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1802–1810