Isolation and characterization of cellulose nanofibers from banana peels

Cellulose nanofibers were isolated from banana peel using a combination of chemical treatments, such as alkaline treatment, bleaching, and acid hydrolysis. The suspensions of chemically treated fibers were then passed through a high-pressure homogenizer 3, 5, and 7 times, to investigate the effect of the number of passages on the properties of the resulting cellulose nanofibers. The cellulose nanofibers isolated in this study had a dry basis yield of 5.1 %. Transmission electron microscopy showed that all treatments effectively isolated banana fibers in the nanometer scale. The micrographs of the process steps used to isolate the nanofibers revealed gradual removal of amorphous components. Increasing number of passages in the homogenizer shortened the cellulose nanofibers while furnishing more stable aqueous suspensions with zeta potential values ranging from ?16.1 to ?44.1 mV. All the samples presented aspect ratio in the range of long nanofibers, hence being potentially applicable as reinforcing agents in composites. X-ray diffraction studies revealed that homogenized nanofiber suspensions were more crystalline than non-homogenized suspensions. Fourier transform infrared spectroscopy confirmed that alkaline treatment and bleaching removed most of the hemicellulose and lignin components present in the banana fibers. Thermal analyses revealed that the developed nanofibers exhibit enhanced thermal properties. In general, the nanoparticles isolated from the banana peel have potential application as reinforcing elements in a variety of polymer composite systems.     

Bacterial cellulose/triethanolamine based ion-conducting membranes

New bacterial cellulose (BC)–triethanolamine (TEA) ion-conducting membranes have been prepared and characterized. The samples were obtained by soaking BC membranes in triethanolamine aqueous solutions and drying. The scanning electron microscopy pictures revealed that the incorporation of TEA in BC membranes covers the cellulose microfibrils. Raman spectra exhibited BC and TEA characteristic group frequencies and thermal analysis evidenced an influence of TEA content on the sample thermal stability. The ion-conductivity as a function of the temperature showed an Arrhenius behavior increasing from 1.8 × 10^?5 S/cm at room temperature to 7.0 × 10^?4 S/cm at 80 °C for the BC–TEA 1 M sample.     

Functionalization of a Ruthenium–Diacetylide Organometallic Complex as a Next‐Generation Push–Pull Chromophore

The design and preparation of an asymmetric ruthenium–diacetylide organometallic complex was successfully achieved to provide an original donor–π–[M]–π–acceptor architecture, in which [M] corresponds to the [Ru(dppe)₂] (dppe: bisdiphenylphosphinoethane) metal fragment. The charge‐transfer processes occurring upon photoexcitation of the push–pull metal–dialkynyl σ complex were investigated by combining experimental and theoretical data. The novel push–pull complex, appropriately end capped with an anchoring carboxylic acid function, was further adsorbed onto a semiconducting metal oxide porous thin film to serve as a photosensitizer in hybrid solar cells. The resulting photoactive material, when embedded in dye‐sensitized solar cell devices, showed a good spectral response with a broad incident photon‐to‐current conversion efficiency profile and a power conversion efficiency that reached 7.3 %. Thus, this material paves the way to a new generation of organometallic chromophores for photovoltaic applications.     

Mixed solvents for cellulose derivatization under homogeneous conditions: kinetic,spectroscopic, and theoretical studies on the acetylation of the biopolymer in binary mixtures of an ionic liquid and molecular solvents

Rate constants for the acetylation of microcrystalline cellulose (MCC), by ethanoic anhydride in the presence of increasing concentrations of the ionic liquid (IL), 1-allyl-3-methylimidazolium chloride in dipolar aprotic solvents (DAS), N,N-dimethylacetamide (DMAC), and acetonitrile (MeCN), have been calculated from conductivity data. The third order rate constants showed a linear dependence on [IL]. We explain this result by assuming that the reacting cellulose is hydrogen-bonded to the IL. This is corroborated by kinetic data of the acetylation of cyclohexylmethanol, FTIR of the latter compound and of cellobiose in mixtures of IL/DAS, and conductivity of the binary solvent mixtures in absence, and presence of MCC. Cellulose acetylation is faster in IL/DMAC than in IL/MeCN; this difference is explained based on solvatochromic data (empirical polarity and basicity) and molecular dynamics simulations. Results of the latter indicate hydrogen-bond formation between the hydroxyl groups of the anhydroglucose unit of MCC, (Cl^?) of the IL, and the dipole of the DMAC. Under identical experimental conditions, acetylation in IL/DMAC is faster than that in LiCl/DMAC (2.7–8 times), due to differences in the enthalpies and entropies of activation.     

Time‐Resolved Assembly of Cluster‐in‐Cluster {Ag12}‐in‐{W76} Polyoxometalates under Supramolecular Control

We report the time‐resolved supramolecular assembly of a series of nanoscale polyoxometalate clusters (from the same one‐pot reaction) of the form: [H_(10+m)Ag₁₈Cl(Te₃W₃₈O₁₃₄)₂]_n, where n=1 and m=0 for compound 1 (after 4 days), n=2 and m=3 for compound 2 (after 10 days), and n=∞ and m=5 for compound 3 (after 14 days). The reaction is based upon the self‐organization of two {Te₃W₃₈} units around a single chloride template and the formation of a {Ag₁₂} cluster, giving a {Ag₁₂}‐in‐{W₇₆} cluster‐in‐cluster in compound 1 , which further aggregates to cluster compounds 2 and 3 by supramolecular Ag‐POM interactions. The proposed mechanism for the formation of the clusters has been studied by ESI‐MS. Further, control experiments demonstrate the crucial role that TeO₃^2?, Cl^?, and Ag⁺ play in the self‐assembly of compounds 1 – 3 .     

Total Chemical Synthesis of Biologically Active Fluorescent Dye‐Labeled Ts1 Toxin

Ts1 toxin is a protein found in the venom of the Brazilian scorpion Tityus serrulatus. Ts1 binds to the domain II voltage sensor in the voltage‐gated sodium channel Nav and modifies its voltage dependence. In the work reported here, we established an efficient total chemical synthesis of the Ts1 protein using modern chemical ligation methods and demonstrated that it was fully active in modifying the voltage dependence of the rat skeletal muscle voltage‐gated sodium channel rNav1.4 expressed in oocytes. Total synthesis combined with click chemistry was used to label the Ts1 protein molecule with the fluorescent dyes Alexa‐Fluor 488 and Bodipy. Dye‐labeled Ts1 proteins retained their optical properties and bound to and modified the voltage dependence of the sodium channel Nav. Because of the highly specific binding of Ts1 toxin to Nav, successful chemical synthesis and labeling of Ts1 toxin provides an important tool for biophysical studies, histochemical studies, and opto‐pharmacological studies of the Nav protein.     

The rheological properties of hydrogenated castor oil crystals

The present study focuses on the rheological performance of a surfactant-rich aqueous suspension containing hydrogenated castor oil (HCO) crystals. HCO can be typically crystallized in five distinct shapes: spherically shaped, irregularly shaped, star-shaped (also called rosettes), short needles, and thick or thin fibers. The effect of the differences in shape on the rheological performance is studied, and the rheological properties are compared to the behavior of other triacylglycerol’s (TAG) suspensions. A suspension of TAG crystals usually behaves as a colloidal gel wherein a colloidal gel is defined as a network of flocs, with each floc being an aggregate of smaller subunits. All of these surfactant-rich aqueous suspensions of HCO crystals behaved according to a colloidal gel in the transient regime, independent of the studied crystal shapes, except the long thin fibers at a concentration above 0.1 wt% HCO transitioning from a heterogeneous fractal rod network to a homogeneous rod network, shifting from a colloidal gel to a glass.     

Antitumoral and MMP-2 inhibition activity of raloxifene or tamoxifen loaded nanoparticles containing dimethyl-β-cyclodextrin

A new nanoparticle formulation has been developed by using dimethyl-β-cyclodextrin (DM-β-CD) with raloxifene HCl or tamoxifene citrate. Both drugs are insoluble in water and represent as low bioavailibilities when given orally. Tamoxifen has an FDA approval for breast cancer prevention and the treatment. Raloxifene is approved for osteoprosis treatment. Both drugs were selected as a model drug antitumoural activity and MMP-2 inhibition studies were evaluated on breast cancer cell lines MCF-7 and MDA-MB 231. MMP-2 is known to be responsible for tumour invasion and initation the of angiogenesis. DM-β-CD and sodium taurocholate (NaTC) have been used as absorption enhancers to increase penetration effect of raloxifene/tamoxifen on the tumour cells and aimed to provide high antitumoral activity and MMP-2 inhibition results by developed nanoparticle formulations. The effects of two absorption enhancers were compared. The highest antitumoral activity was observed for DM-β-CD—raloxifene HCl nanoparticle formulation and also MMP-2 enzyme inhibit effectively.     

Mullite crystallization using fully hydrolyzed silica sol: the gelation temperature influence

Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite.     

Mutant-Selective Allosteric EGFR Degraders are Effective Against a Broad Range of Drug-Resistant Mutations

Targeting epidermal growth factor receptor (EGFR) through an allosteric mechanism provides a potential therapeutic strategy to overcome drug-resistant EGFR mutations that emerge within the ATP binding site. Here, we develop an allosteric EGFR degrader, DDC-01-163, which can selectively inhibit the proliferation of L858R/T790M (L/T) mutant Ba/F3 cells while leaving wildtype EGFR Ba/F3 cells unaffected. DDC-01-163 is also effective against osimertinib-resistant cells with L/T/C797S and L/T/L718Q EGFR mutations. When combined with an ATP-site EGFR inhibitor, osimertinib, the anti-proliferative activity of DDC-01-163 against L858R/T790M EGFR-Ba/F3 cells is enhanced. Collectively, DDC-01-163 is a promising allosteric EGFR degrader with selective activity against various clinically relevant EGFR mutants as a single agent and when combined with an ATP-site inhibitor. Our data suggests that targeted protein degradation is a promising drug development approach for mutant EGFR.