Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Normal mode analysis of oligomeric proteins: Reduction of the memory requirement by consideration of rigid geometry and molecular symmetry

A method is presented to reduce the memory requirement of normal mode analysis applied to systems containing two or more large proteins when these systems exhibit symmetry properties. We use a rigid geometry model (i.e., only the dihedral angles of the polypeptide chain are considered as variables). This model allows a reduction by a factor of 8 on average of the number of variables with a concomitant freezing of the high-frequency modes. The symmetry properties of the system are used to reduce further the number of variables that must be considered in the computation. Application of group theory leads to a factorization of the matrices of interest (the coefficient and the Hessian matrices) into independent blocks along the diagonal. The initial, reducible representation is thus transformed into a number of irreducible representations of smaller dimensions. In the case of the C₂ symmetry group, the method leads to a reduction of the size of the matrices that must be manipulated during the computation (coefficient matrix, Hessian matrix, and eigenvectors matrix) by a factor of 256 compared with the usual normal mode analysis in Cartesian coordinate space. The method is particularly well adapted to the study of the dynamics of oligomeric proteins because these proteins often display symmetry properties (e.g., virus coat proteins, immunoglobulins, hemoglobin, etc.). In favorable cases, in conjunction with X-ray diffuse scattering data, the study of systems showing allosteric properties might be considered. © 1994 by John Wiley & Sons, Inc.     

Development and validation of a high-performance liquid chromatographic method for the determination of clomazone residues in surface water

A method is described for the determination of clomazone residues in surface water by high-performance liquid chromatography with UV detection. The method involves solid-phase extraction with C18 extraction tubes. Clomazone was separated on a C18 column with a mobile phase of methanol-water (65:35, v/v) at pH 4.0 and a flow-rate of 1.0 ml/min. After optimization of the extraction and separation conditions, the method was validated. The method developed can be used for determination of clomazone in surface water, at the limit of 0.1 mcirog/l set by the European Union drinking water directive, with a 400-fold preconcentration.     

Supercritical fluid extraction of flumetralin in tobacco

Summary This work evaluates the level of Flumetralin residues in real tobacco samples. Conventional extraction methods were compared with SFE methods in both static and dynamic modes using CO₂ and CO₂ with modifier. Additionally, in the dynamic SFE mode, different collection approaches, such as collection at room temperature without solvent, collection at room temperature in the presence of solvent (hexane) and collection in an ice bath, without solvent, were studied. SFE showed itself to be a promising extraction technique for pesticide residues in tobacco samples.     

Expeditious synthesis of porphyrin-cobaltacarborane conjugates

Two porphyrin-cobaltacarborane conjugates and were prepared in high yields via a nucleophilic ring-opening reaction of . These novel boron-rich and fluorescent compounds have potential application as boron delivery agents for the boron neutron capture therapy of tumors.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Redox behaviour of cysteine in the presence of ammonium trioxovanadate(V)

The interaction of ammonium trioxovanadate(V) with cysteine in aqueous solution was studied by cyclic voltammetry and absorption spectroscopy techniques. In the absence of cysteine, the cyclic voltammogram (CV) of ammonium trioxovanadate(V) solution in 0.1 M phosphate buffer (pH 7) gave two peaks at -0.130 V (reversible) and -0.400 V (irreversible). These peaks (-0.130 V, -0.400 V) can be attributed to V(V)/V(IV) and V(IV)/V(III) redox processes, respectively. In the presence of cysteine at low scan rate (40 mV/s), the peak at -0.780 V, which is assigned to the irreversible reduction of free cystine, was observed. In addition, the reduction peak of the disulfidic anion S(2)(2-) was seen at -0.650 V. Under aerobic conditions, the peaks of the disulfidic anion S(2)(2-) and free cystine are well separated. From electronic spectra of ammonium trioxovanadate(V) and cysteine mixtures, LMCT transition associated with V(V)-cyteine complex was obtained at 743 nm. The stoichiometry (ML(2)) and stability constant (log beta(1:2)=6.67) of V(V)-cysteine complex were determined by means of mole ratio method.     

New dehydration in the pyrrolo[1,2–6-b]isoquinoline series. Preparation and structural identification of 3,5-dihydrobenz[f]indolizin-3-one

3,5-Dihydrobenz[f]indolizin-3-one was prepared by a novel dehydration reaction involving the heating of 1,2,3,5,10,10a-hexahydro[f]indolizine-3,10-dione with polyphosphoric acid. The structure of this new compound was established by X-ray crystallography, by nmr spectroscopy and by reduction to the known products 1,2,3,5-tetrahydrobenz[f]indolizin-3-one and 1,2,3,5,10,10a-hexahydrobenz[f]indolizin-3-one.     

Enantioselective Preparation of 2‐Aminomethyl Carboxylic Acid Derivatives: Solving the β2‐Amino Acid Problem with the Chiral Auxiliary 4‐Isopropyl‐5,5‐diphenyloxazolidin‐2‐one (DIOZ). Preliminary Communication

Multigram amounts of suitably protected β²‐amino acids with 17 of the 20 proteinogenic side chains are prepared by diastereoselective reactions of Li, B, or Ti enolates of the corresponding 3‐acyl‐4‐isopropyl‐5,5‐diphenyloxazolidin‐2‐ones (acyl‐DIOZ; 1 ) with appropriate electrophiles (amidomethylation, hydroxyalkylation, (benzyloxycarbonyl)methylation) in yields of 55–90% and with diastereoselectivities of 80 to >97% (Scheme). The primary products 2 – 8 thus obtained are converted to protected β²‐amino acids by standard procedures (Table 1). Many of the DIOZ derivatives are highly crystalline compounds (31 X‐ray crystal structures in Table 2). The chiral auxiliary DIOZ, readily prepared in either enantiomeric form, is recovered with high yield.     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.