Rheological properties of PDMS/clay nanocomposites and their sensitivity to microstructure

The effect of microstructure on the rheology of clay/polymer nanocomposites is investigated using dispersions of organically treated clay in nearly Newtonian poly(dimethylsiloxane). Degree of dispersion and floc size are altered by using two different dispersion procedures and by changing the shear history. The scaling for dynamic moduli of attractive colloids applies, except for a possible relaxation mechanism at very low frequencies. The time to reach the crossover at a given frequency is found to be extremely sensitive to the dispersion procedure used. Hydrodynamic and elastic components of the steady state stress, on the other hand, evolve in a very similar fashion for the different systems. Although the relaxation times of the elastic stress components change drastically with flow-induced changes in structure, the dispersion process hardly has an effect at all. Intermittent start-up flows in the forward and reverse directions show that anisotropy persists long after the flow has been arrested, even at shear rates where no large reversible flocs are present. The degree of dispersion only had a limited effect on the anisotropy. Finally, the effect of shear on structure recovery has been studied. Very low shear rates are found to increase the rate of recovery, even for small strains.     

On optimal zero-preserving corrections for inconsistent linear systems

This paper addresses the problem of finding an optimal correction of an inconsistent linear system, where only the nonzero coefficients of the constraint matrix are allowed to be perturbed for reconstructing a consistent system. Using the Frobenius norm as a measure of the distance to feasibility, a nonconvex minimization problem is formulated, whose objective function is a sum of fractional functions. A branch-and-bound algorithm for solving this nonconvex program is proposed, based on suitably overestimating the denominator function for computing lower bounds. Computational experience is presented to demonstrate the efficacy of this approach.     

Favorskii rearrangement of a highly functionalized meso-dihaloketone

This paper describes studies on the feasibility of an asymmetric Favorskii rearrangement of a meso-dihaloketone substrate. In the racemic series, metal amide bases in the presence of amines give poor to reasonable yields of ring-contracted unsaturated cyclopentyl amides, whilst amines in aqueous solvent mixtures afford cyclopentyl amides in good to excellent yields. A range of chiral non-racemic amines are screened, a tiny diastereo-bias is observed and a tentative mechanistic rationale for the diastereoselective process is proposed.     

Poly(vinylpyrrolidone)‐based films grown on copper surfaces

The influence of molecular weight and the amount of the poly(vinylpyrrolidone) (PVP) on the growth of poly(vinylpyrrolidone)–based films on copper surfaces was studied by electrochemical, infrared and electronic spectroscopy, and thermogravimetric methods. Complex polymer/metal ions were deposited onto a copper surface, as the result of the electrochemically generated reaction of copper cations with PVP and SCN^?, in sulfuric acid media. Spontaneous film growth on copper surfaces was generated and characterized as a Cu(II)/PVP/SCN^? complex. Infrared spectra and thermal gravimetric curves of the films generated at + 0.7 V were compared with the chemically synthesized complex, and show the same patterns. The oxidation process can be described as: Cu(0)→Cu(I) and Cu(I)→Cu(II), and the copper complex formed at more positive potentials was characterized as Cu(II)/PVP/SCN^?, with copper bonded to the oxygen atom of PVP and thiocyanate ligand N‐linked. This study focuses on the complex formation on a copper surface in acid media and its characterization through electrochemical and spontaneously generated reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2206–2214, 2009     

Stereoselective Hydrolysis of Substituted Cyclopropanedicarboxylates with Pig Liver Esterase

The hydrolysis of the meso-cyclopropane-1,2-dicarboxylates 1a - 3a , 4 , 5a , 6a , and 9 , containing various substituents at C(3), and of the rac-3-phenylcyclopropane-1,2-dicarboxylates 7a , 8a , and 10 with pig liver esterase (PLE) is described. The stereoselectivtty and absolute configurations of the products were determined. An interpretation of results was attempted on the basis of a recent active-site model for PLE.     

Synthesis and characterization of 2D transition metal dichalcogenides: Recent progress from a vacuum surface science perspective

Layered transition metal dichalcogenides (TMDs) are a diverse group of materials whose properties vary from semiconducting to metallic with a variety of many body phenomena, ranging from charge density wave (CDW), superconductivity, to Mott-insulators. Recent interest in topologically protected states revealed also that some TMDs host bulk Dirac- or Wyle-semimetallic states and their corresponding surface states. In this review, we focus on the synthesis of TMDs by vacuum processes, such as molecular beam epitaxy (MBE). After an introduction of these preparation methods and categorize the basic electronic properties of TMDs, we address the characterization of vacuum synthesized materials in their ultrathin limit-mainly as a single monolayer material. Scanning tunneling microscopy and angle resolved photoemission spectroscopy has revealed detailed information on how monolayers differ in their properties from multi-layer and bulk materials. The status of monolayer properties is given for the TMDs, where data are available. Distinct modifications of monolayer properties compared to their bulk counterparts are highlighted. This includes the well-known transition from indirect to direct band gap in semiconducting group VI-B TMDs as the material-thickness is reduced to a single molecular layer. In addition, we discuss the new or modified CDW states in monolayer VSe₂ and TiTe₂, a Mott-insulating state in monolayer 1T-TaSe₂, and the monolayer specific 2D topological insulator 1T′-WTe₂, which gives rise to a quantum spin Hall insulator. New structural phases, that do not exist in the bulk, may be synthesized in the monolayer by MBE. These phases have special properties, including the Mott insulator 1T-NbSe₂, the 2D topological insulators of 1T′-MoTe₂, and the CDW material 1T-VTe₂. After discussing the pure TMDs, we report the properties of nanostructured or modified TMDs. Edges and mirror twin grain boundaries (MTBs) in 2D materials are 1D structures. In group VI-B semiconductors, these 1D structures may be metallic and their properties obey Tomonaga Luttinger quantum liquid behavior. Formation of Mo-rich MTBs in Mo-dichalcogenides and self-intercalation in between TMD-layers are discussed as potential compositional variants that may occur during MBE synthesis of TMDs or may be induced intentionally during post-growth modifications. In addition to compositional modifications, phase switching and control, in particular between the 1H and 1T (or 1T′) phases, is a recurring theme in TMDs. Methods of phase control by tuning growth conditions or by post-growth modifications, e.g. by electron doping, are discussed. The properties of heterostructures of TMD monolayers are also introduced, with a focus on lateral electronic modifications in the moiré-structures of group VI-B TMDs. The lateral potential induced in the moiré structures forms the basis of the currently debated moiré-excitons. Finally, we review a few cases of molecular adsorption on nanostructured monolayer TMDs. This review is intended to present a comprehensive overview of vacuum studies of fundamental materials' properties of TMDs and should complement the investigations on TMDs prepared by exfoliation or chemical vapor deposition and their applications.     

Determination of surface ζ‐potential and isoelectric point of carbon surfaces using tracer particle suspensions

Carbon materials are widely used in a range of applications from biomaterials to sensing and electronics. Many of these applications rely on the ability to control carbon/water interfacial properties, in particular, surface charge density. This work reports a study of the electrokinetic properties of amorphous carbon thin films as a function of pH and surface chemistry. Surface ζ‐potential (SZP) and isoelectric point were determined using the tracer particle method. Initially, the use of sulfonated and amine‐terminated latex bead suspensions as tracer particles for the determination of SZP of reference polymer surfaces was validated. The tracer particle method was then applied to the determination of SZP and isoelectric point of macroscopic carbon surfaces with different surface chemistry. Highly graphitic and sp³‐rich hydrogenated carbon surfaces were found to display negative SZP, as expected for hydrophobic surfaces. The isoelectric point of the most highly graphitic surface was found to be pH_iso = 3.7. Surface oxidation of these films resulted in a decrease of SZP at all pH values and in a downshift of pH_iso to values lower than 1.5, consistently with the presence of surface acidic groups arising from oxidation. Results indicate that the specific choice of acid/base chemistry for the tracer particles does not significantly affect either SZP or pH_iso determinations. These results show that the tracer particle method in combination with widely available latex beads as tracers can be applied for the determination of carbon SZP as a function of pH. Copyright © 2017 John Wiley & Sons, Ltd.     

Transient rheological behaviour of poly-para-henylenetherephthalamide (PpPTA) in sulphuric acid

Nearly all the available information on the transient flow behaviour of liquid crystalline polymers has been obtained on model systems, especially on solutions of polybenzylglutamate (PBG) and hydroxypropylcellulose (HPC). The assessment of rheological models has been based almost entirely on these model systems. It is not clear how much of the available theoretical and experimental knowledge can be applied to systems of industrial relevance, which have quite different molecular structures. Here, an industrial lyotropic system, poly(p-phenylenetherephthalamide) (PpPTA) in sulphuric acid (TWARON from AKZO), is investigated. Various techniques to study transient behaviour are used, these include measurements of transient shear and normal stresses after sudden changes in shear rate, dynamic moduli and stress relaxation after cessation of flow and elastic recoil. At all shear rates studied the PpPTA solution is shear thinning, and the first normal stress difference remains positive. For the stress transients a strain scaling applies reasonably well as it did in model systems. The moduli increase with time upon cessation of flow, indicating that the molecules become less oriented in the previous flow direction. This particular behaviour is similar to that of HPC. Transients also resemble more closely those of HPC rather than those of PBG. This latter difference might be attributed to the higher flexibility of HPC and PpPTA chains as compared with PBG molecules.     

Wavelength encoded analytical imaging and fiber optic sensing with pH sensitive CdTe quantum dots

CdTe quantum dots (QDs), capped with mercaptopropionic acid (MPA), were synthesized and the variation of their fluorescence properties (steady state and lifetime) with pH was assessed in solution and when immobilized in a sol-gel host. Three different sizes of CdTe QDs with excited state lifetimes ranging from 42 to 48 ns and with emission maximum at 540 nm (QD₅₄₀), 580 nm (QD₅₈₀) and 625 nm (QD₆₂₅) were selected. The solution pH affects the maximum emission wavelength (shifts to higher wavelengths of 23, 24 and 27 nm for QD₅₄₀, QD₅₈₀ and QD₆₂₅, respectively), the excited state lifetime and the fluorescence intensity in a reversible way. Linearization of the maximum emission wavelength variation with the pH allows the estimation of an apparent ionization constant (pK_a) for each QD: 6.5 ± 0.1 (QD₅₄₀), 6.1 ± 0.5 (QD₅₈₀) and 5.4 ± 0.3 (QD₆₂₅). The variation of the QDs fluorescence properties was further explored using confocal laser scanning microscopy allowing the implementation of a new calibration method for pH imaging in solution. QDs were successfully immobilized on the tip of an optical fiber by dip-coating using sol-gel procedure. The immobilized QDs showed a similar pH behaviour to the one observed in solution and an apparent lifetime of 80, 68 and 99 ns, respectively. The proposed QDs based methodology can be successfully used to monitor pH using wavelength encoded data in imaging and fiber optic sensing applications.