Aflatoxin B(1) adsorption by natural and copper modified montmorillonite

Adsorption of aflatoxin B(1) (AFB1) by natural montmorillonite (MONT) and montmorillonite modified with copper ions (Cu-MONT) was investigated. Both MONTs were characterized using the X-ray powder diffraction (XRPD) analysis, thermal analysis (DTA/TGA) and scanning electron miscroscopy/electron dispersive spectroscopy (SEM/EDS). The results of XRPD and SEM/EDS analyses of Cu-MONT suggested partial ion exchange of native inorganic cations in MONT with copper occurred. Investigation of AFB1 adsorption by MONT and Cu-MONT, at pH 3, 7 or 9, showed that adsorption of this toxin by both MONTs was high (over 93%). Since AFB1 is nonionizable, no differences in AFB1 adsorption by both MONTs, at different pHs, were observed, as expected. Futhermore, it was determined that adsorption of AFB1 by both MONTs followed a non-linear (Langmuir) type of isotherm, at pH 3. The calculated maximum adsorbed amounts of AFB1 by MONT (40.982mg/g) and Cu-MONT (66.225mg/g), derived from Langmuir plots of isotherms, indicate that Cu-MONT was much effective in adsorbing AFB1. Since, the main cation in an exchangeable position in MONT is calcium, and in Cu-MONT both calcium and copper, the fact that ion exchange of inorganic cations in MONT with copper increases adsorption of AFB1 suggests that additional interactions between AFB1 and copper ions in Cu-MONT caused greater adsorption.     

Win X-ray: a new Monte Carlo program that computes X-ray spectra obtained with a scanning electron microscope.

A new Monte Carlo program, Win X-ray, is presented that predicts X-ray spectra measured with an energy dispersive spectrometer (EDS) attached to a scanning electron microscope (SEM) operating between 10 and 40 keV. All the underlying equations of the Monte Carlo simulation model are included. By simulating X-ray spectra, it is possible to establish the optimum conditions to perform a specific analysis as well as establish detection limits or explore possible peak overlaps. Examples of simulations are also presented to demonstrate the utility of this new program. Although this article concentrates on the simulation of spectra obtained from what are considered conventional thick samples routinely explored by conventional microanalysis techniques, its real power will be in future refinements to address the analysis of sample classifications that include rough surfaces, fine structures, thin films, and inclined surfaces because many of these can be best characterized by Monte Carlo methods. The first step, however, is to develop, refine, and validate a viable Monte Carlo program for simulating spectra from conventional samples.     

Theoretical and experimental investigation on the oxidation of gallic acid by sulfate radical anions

By monitoring the decay of SO4*- after flash photolysis of aqueous solutions of S2O82- at different pH values, the kinetics of the reaction of SO4*- radicals with gallic acid and the gallate ion was investigated. The bimolecular rate constants for the reactions of the sulfate radicals with gallic acid and the gallate ion were found to be (6.3 +/- 0.7) x 10(8) and (2.9 +/- 0.2) x 10(9) M(-1) s(-1), respectively. On the basis of the oxygen-independent second-order decay kinetics and on their absorption spectra, the organic radicals formed as intermediates of these reactions were assigned to the corresponding phenoxyl radicals. DFT calculations in the gas phase and aqueous solution support formation of the phenoxyl radicals by H abstraction from the phenols to the sulfate radical anion. The observed recombination of the phenoxyl radicals of gallic acid to yield substituted biphenyls and quinones is also supported by the calculations. HPLC/MS product analysis showed formation of one of the predicted quinones.     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

Synthesis, NMR conformational analysis and pharmacological evaluation of 7,7a,13,14-tetrahydro-6H-cyclobuta[b]pyrimido[1,2-a:3,4-a']diindole analogues as melatonin receptor ligands

A structure for the self-condensation product of 2-(1H-indol-2-yl)ethyl tosylate 2a, previously proposed as 6,7,14,15-tetrahydro-15aH-azocino[1,2-a:6,5-b]diindole 3a, was revised based on the (13)C-2D-INADEQUATE experiment, and proved to be 7,7a,13,14-tetrahydro-6H-cyclobuta[b]pyrimido[1,2-a:3,4-a']diindole 4a. A mechanism for the unexpected formation of this novel hexacyclic heterocycle was proposed and its NMR solution structure was elucidated. Five derivatives of the title ring skeleton 12-16 designed as melatonin receptor ligands were synthesized and their affinities for the human MT(1) and MT(2) receptors were determined. Both butyramides 13 and 15, as well as the non-methoxy acetamide 12 exhibited micromolar binding affinities for both receptors being slightly MT(2) selective. The methoxy acetamide 14 showed the best pharmacological profile exhibiting a five times higher affinity for MT(1) (K(i) = 49 nM) than for MT(2) (K(i) = 246 nM) receptor.     

Water-soluble carbosilane dendrimers protect phosphorothioate oligonucleotides from binding to serum proteins

Treatment of dendriplexes formed between water-soluble carbosilane dendrimers and phosphorothioate oligodeoxynucleotides (ODN) with the anionic detergent sodium dodecyl sulfate disrupted the complexes indicating that the nature of the union in such dendriplexes is merely electrostatic. However, dendriplexes were not dissociated by serum proteins like bovine or human serum albumins, as assessed by gel electrophoresis and fluorescence experiments. This would imply a dendrimer-mediated protective effect able to prevent ODN interactions with serum proteins and additionally could translate into a reduction of the ODN doses needed to achieve the biological effects. The employment of carbosilane dendrimers as carriers may solve the problem of ODN kidnapping by plasmatic proteins as a key drawback for therapeutics involving ODNs. As examples, transfection processes on normal primary peripheral blood cells and diagnosis of HIV infection in the presence of serum have been assayed.     

Copper acetylacetonate anchored onto amine-functionalised clays

Copper (II) acetylacetonate was immobilised directly onto two clays, laponite (Lap) and K10-montmorillonite (K10), and after their amine functionalisation with (3-aminopropyl)triethoxysilane (APTES). All the materials were characterised by nitrogen adsorption isotherms at -196 degrees C, elemental analysis, TG-DSC, XRD, and IR spectroscopy. The K10-based materials were also characterised by XPS. The APTES-functionalised K10 showed higher copper loading than K10, indicating that the clay functionalisation enhanced the complex immobilisation; on the contrary, in Lap-based materials higher metal content was obtained by direct complex anchoring, probably due to the delaminated nature of Lap which induced the particles aggregation on functionalisation with APTES. All the results pointed out that the Cu complex was anchored onto the amine-functionalised clays by Schiff condensation between the amine groups of anchored APTES and the carbonyl groups of the acetylacetonate ligand, whereas direct immobilisation proceeded mostly through interaction between the metal centre and the clay surface hydroxyl groups.     

Automatic sequential determination of the hydrogen peroxide scavenging activity and evaluation of the antioxidant potential by the 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation assay in wines by sequential injection analysis

An automatic system that performs two analytical procedures, allowing the evaluation of the relative antioxidant capacity of wine samples, was developed. Automation was carried out using a sequential injection analysis (SIA) system that allowed, thanks to its versatility, the development of two methodologies. One is based on the decolorization assay of the 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical, using a spectrophotometric detector. A second methodology allowed the evaluation of the hydrogen peroxide scavenging activity by measuring the oxidation of homovanylic acid (HVA) to its fluorescent dimer, using a fluorescent detector.The developed automatic methodologies were evaluated using trolox as standard and subsequently using other antioxidant substances as gallic acid, caffeic acid, ascorbic acid, catechin and taxifolin which are abundant in wine and whose antioxidant activities were compared to that shown by trolox. The spectrophotometric and fluorimetric assays showed linearity intervals between 0.001 and 0.01 mM, and 0.001 and 0.008 mM of trolox, respectively.The evaluation of the antioxidant power of 20 white and red wine samples, from different Portuguese wine producing regions, was carried out sequentially, in the automatic system. The results were expressed in trolox equivalent antioxidant capacity (TEAC) and presented, for the ABTS and hydrogen peroxide scavenging activity methodologies, detection limits of 8.4 × 10⁻⁷ and 1.4 × 10⁻⁴ mM and relative standard deviation (R.S.D. (%)) in the range 0.6-2.4 and 1-1.8, respectively.     

Characterization of etched electrochemical detection for electrophoresis in micron inner diameter capillaries

An enhanced etched electrochemical (EC) detection technique has been developed for CE in micron inner diameter capillaries. The design improvements allow for better alignment between the capillary bore and the electrode. This new method involves utilizing a carbon fiber microelectrode and etching both the carbon fiber and the detection end of a micrometer-sized inner diameter capillary to limit dead volume and analyte diffusion at the amperometric EC detector. To understand the factors affecting enhanced detector efficiency, a detailed examination of the relationship between detector design and performance has been completed by exploring the effects of varying electrode diameter, tip shape, and size, in addition to the etch length of the capillary outlet. The enhanced detection provides peak efficiencies as high as 75000 theoretical plates and estimated detection limits as low as 40 nM for dopamine. This etched detection method should further facilitate volume-limited sample analysis by CE.     

Immobilization of Distinctly Capped CdTe Quantum Dots onto Porous Aminated Solid Supports

Immobilization of quantum dots (QDs) onto solid supports could improve their applicability in the development of sensing platforms and solid‐phase reactors by allowing the implementation of reusable surfaces and the execution of repetitive procedures. As the reactivity of QDs relies mostly on their surface chemistry, immobilization could also limit the disruption of solution stability that could prevent stable measurements. Herein, distinct strategies to immobilize QDs onto porous aminated supports, such as physical adsorption and the establishment of chemical linking, were evaluated. This work explores the influence of QD capping and size, concentration, pH, and contact time between the support and the QDs. Maximum QD retention was obtained for physical adsorption assays. Freundlich and Langmuir isotherms were used to analyze the equilibrium data. Gibbs free energy, enthalpy, and entropy were calculated and the stability of immobilized QDs was confirmed.