Automatic sequential determination of the hydrogen peroxide scavenging activity and evaluation of the antioxidant potential by the 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation assay in wines by sequential injection analysis

An automatic system that performs two analytical procedures, allowing the evaluation of the relative antioxidant capacity of wine samples, was developed. Automation was carried out using a sequential injection analysis (SIA) system that allowed, thanks to its versatility, the development of two methodologies. One is based on the decolorization assay of the 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical, using a spectrophotometric detector. A second methodology allowed the evaluation of the hydrogen peroxide scavenging activity by measuring the oxidation of homovanylic acid (HVA) to its fluorescent dimer, using a fluorescent detector.The developed automatic methodologies were evaluated using trolox as standard and subsequently using other antioxidant substances as gallic acid, caffeic acid, ascorbic acid, catechin and taxifolin which are abundant in wine and whose antioxidant activities were compared to that shown by trolox. The spectrophotometric and fluorimetric assays showed linearity intervals between 0.001 and 0.01 mM, and 0.001 and 0.008 mM of trolox, respectively.The evaluation of the antioxidant power of 20 white and red wine samples, from different Portuguese wine producing regions, was carried out sequentially, in the automatic system. The results were expressed in trolox equivalent antioxidant capacity (TEAC) and presented, for the ABTS and hydrogen peroxide scavenging activity methodologies, detection limits of 8.4 × 10⁻⁷ and 1.4 × 10⁻⁴ mM and relative standard deviation (R.S.D. (%)) in the range 0.6-2.4 and 1-1.8, respectively.     

Neuartige massenspektrometrische Zerfallsreaktionen bei α,ω-disubstituierten Alkanen. 15. Mitteilung über das massenspektrometrische verhalten von stickstoffverbindungen [1]

The mass spectral behaviour of α,ω-disubstituted alkanes and, especially, that of different N-substituted α,ω-diaminoalkanes has been investigated. It was found that the two amino groups which are separated by CH₂-groups can fragment only to a small extent indepently from each other. Yet those fragmentation reactions are predominant in which both functional groups participate. The main reactions of this type are:

• 1 Loss of the N-substituent (R) from the molecular ion, leading to the [M⁺—R]-ions.
• 2 Loss of NH₃, primary or secondary amines from the [M⁺—R]-ion in the case of monodi-, tri- and tetra-substituted diamino compounds respectively.
• 3 α-Cleavage to the non charged nitrogen atom by forming the ions
• 4 S_Ni-type fragmentation.

The mechanisms of these fragmentation patterns were deduced by using D-labelled derivatives, from metastabile peaks and high resolution mass spectrometry. These reactions seem to be typical for disubstituted alkanes.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Über das Alkaloid Lonicerin aus Callichilia barteri. 137. Mitteilung über Alkaloide

The alkaloid lonicerine was isolated from Callichilia barteri (Apocynaceae). By chemical and spectroscopic evidence it could be shown to be 16-epi-aspidodasycarpine ( 1 ).     

Calculation of Kinetic Parameters for Crystallization Processes

In this work, kinetic data of crystallization processes have been determined by measurement of the intensities of reflection of X-ray diffraction spectra and modeled using the Avrami-Eroféev and Jander expressions. We have created a simple Microsoft Excel spreadsheet that allows students to calculate the kinetic data. Students will be able to calculate the kinetic parameters of any crystallization process, for example, hydrothermal crystallization of catalytic materials like zeolites. The possibility of using the spreadsheet with different models or expressions and discriminating among them is also validated by comparing the model results with experimental data (differential thermal analyses, DTA) from papers available in the recent literature.     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002     

Conformational changes accompanying electronic excitation of CD3 NO

Analysis of the 675 nm absorption of CD₃NO shows that the conformation changes from eclipsed in the ground state to staggered in the à ¹A″(ne*) excited state. The internal-rotation barrier V₃ increases from 383 to 475± 50 cm^?1.     

Alstonia scholaris: Struktur des Indolalkaloides Narelin

Alstonia scholaris: The structure of the indole alkaloid nareline Besides the known akuammidine, picralinal, picrinine and pseudoakuammigine a new indole alkaloid called nareline (M=352) was isolated from Alstonia scholaris R. BR. , which belongs to the plant family of Apocynaceae. Its structure 2 was deduced by single crystal X-ray diffraction. 2 represents the absolute configuration. The spectroscopic data of 2 and its derivatives (Scheme 1) as well as their chemical behavior support this structure. In biogenetic sense nareline is related to the bases akuammiline ( 4 ) and picraline ( 5 ) (Scheme 2). In contrast to those the C-atom 5 is exocyclic and represents an aldehyde group which forms together with the oxygen atom of the N (4)-hydroxylamine group a cyclic half acetale. - By oxidation (CrO₃/CH₃COOH) of 2 the oxindol derivative 19 (oxonareline) is formed which contains a cyclic acetal as a partial structure element (Scheme 4).     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.