Acid–base chemistry at the single ion limit

We present the results of acid–base experiments performed at the single ion (H⁺ or OH⁻) limit in ∼6 aL volume nanopores incorporating electrochemical zero-mode waveguides (E-ZMWs). At pH 3 each E-ZMW nanopore contains ca. 3600H⁺ ions, and application of a negative electrochemical potential to the gold working electrode/optical cladding layer reduces H⁺ to H₂, thereby depleting H⁺ and increasing the local pH within the nanopore. The change in pH was quantified by tracking the intensity of fluorescein, a pH-responsive fluorophore whose intensity increases with pH. This behavior was translated to the single ion limit by changing the initial pH of the electrolyte solution to pH 6, at which the average pore occupancy 〈n〉_pore ∼3.6H⁺/nanopore. Application of an electrochemical potential sufficiently negative to change the local pH to pH 7 reduces the proton nanopore occupancy to 〈n〉_pore ∼0.36H⁺/nanopore, demonstrating that the approach is sensitive to single H⁺ manipulations, as evidenced by clear potential-dependent changes in fluorescein emission intensity. In addition, at high overpotential, the observed fluorescence intensity exceeded the value predicted from the fluorescence intensity-pH calibration, an observation attributed to the nucleation of H₂ nanobubbles as confirmed both by calculations and the behavior of non-pH responsive Alexa 488 fluorophore. Apart from enhancing fundamental understanding, the approach described here opens the door to applications requiring ultrasensitive ion sensing, based on the optical detection of H⁺ population at the single ion limit.

Visualizing dynamic change in the number of protons during electroreduction of protons in attoliter volume zero-mode waveguides.     

Influence of the distal his in imparting imidazolate character to the proximal his in heme peroxidase: (1)h NMR spectroscopic study of cyanide-inhibited his42-->ala horseradish peroxidase

The functional higher oxidation states of heme peroxidases have been proposed to be stabilized by the significant imidazolate character of the proximal His. This is induced by a "push-pull" combination effect produced by the proximal Asp that abstracts ("pulls") the axial His ring N(delta)H, along with the distal protonated His that contributes ("pushes") a strong hydrogen bond to the distal ligand. The molecular and electronic structure of the distal His mutant of cyanide-inhibited horseradish peroxidase, H42A-HRPCN, has been investigated by NMR. This complex is a valid model for the active site hydrogen-bonding network of HRP compound II. The (1)H and (15)N NMR spectral parameters characterize the relative roles of the distal His42 and proximal Asp247 in imparting imidazolate character to the axial His. 1D/2D spectra reveal a heme pocket molecular structure that is highly conserved in the mutant, except for residues in the immediate proximity of the mutation. This conserved structure, together with the observed dipolar shifts of numerous active site residue protons, allowed a quantitative determination of the orientation and anisotropies of the paramagnetic susceptibility tensor, both of which are only minimally perturbed relative to wild-type HRPCN. The quantitated dipolar shifts allowed the factoring of the hyperfine shifts to reveal that the significant changes in hyperfine shifts for the axial His and ligated (15)N-cyanide result primarily from changes in contact shifts that reflect an approximately one-third reduction in the axial His imidazolate character upon abolishing the distal hydrogen-bond to the ligated cyanide. Significant changes in side chain orientation were found for the distal Arg38, whose terminus reorients to partially fill the void left by the substituted His42 side chain. It is concluded that 1D/2D NMR can quantitate both molecular and electronic structural changes in cyanide-inhibited heme peroxidase and that, while both residues contribute, the proximal Asp247 is more important than the distal His42 in imparting imidazole character to the axial His 170.     

Diverse evolution of [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 2, 3) metalloligands in CH(2)Cl(2)

The nucleophilicity of the [Pt(2)S(2)] core in [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 3, dppp (1); n = 2, dppe (2)) metalloligands toward the CH(2)Cl(2) solvent has been thoroughly studied. Complex 1, which has been obtained and characterized by X-ray diffraction, is structurally related to 2 and consists of dinuclear molecules with a hinged [Pt(2)S(2)] central ring. The reaction of 1 and 2 with CH(2)Cl(2) has been followed by means of (31)P, (1)H, and (13)C NMR, electrospray ionization mass spectrometry, and X-ray data. Although both reactions proceed at different rates, the first steps are common and lead to a mixture of the corresponding mononuclear complexes [Pt[Ph(2)P(CH(2))(n)PPh(2)](S(2)CH(2))], n = 3 (7), 2 (8), and [Pt[Ph(2)P(CH(2))(n)PPh(2)]Cl(2)], n = 3 (9), 2 (10). Theoretical calculations give support to the proposed pathway for the disintegration process of the [Pt(2)S(2)] ring. Only in the case of 1, the reaction proceeds further yielding [Pt(2)(dppp)(2)[mu-(SCH(2)SCH(2)S)-S,S']]Cl(2) (11). To confirm the sequence of the reactions leading from 1 and 2 to the final products 9 and 11 or 8 and 10, respectively, complexes 7, 8, and 11 have been synthesized and structurally characterized. Additional experiments have allowed elucidation of the reaction mechanism involved from 7 to 11, and thus, the origin of the CH(2) groups that participate in the expansion of the (SCH(2)S)(2-) ligand in 7 to afford the bridging (SCH(2)SCH(2)S)(2-) ligand in 11 has been established. The X-ray structure of 11 is totally unprecedented and consists of a hinged [(dppp)Pt(mu-S)(2)Pt(dppp)] core capped by a CH(2)SCH(2) fragment.     

Molecular mechanics (MM2) calculations and cone angles of phosphine ligands

Molecular mechanics (MM2) calculations were performed on 54 conformations of 18 phosphines (PH₃; PH_3−nR_n, where n = 1,…3, and R = Me and Et, n = 1 or 2 and R =ⁱPr, and n = 1 and R =^tBu, PMe₂Et, PMeEt₂, and PPhMe₂, and PPh₂R where R = Me, Et, ⁱPr, ^tBu and Ph). The results are compared to those previously obtained from MINDO/3 and MNDO calculations, and to experimental data. Single conformer cone angles and weighted average cone angles were calculated from MM2 optimized geometries employing Tolman's general definition, and they are compared to Tolman's values, MINDO/3 results, and T.L. Brown's E_R values. Of the cone angle definitions used, the weighted average values are suggested as the best single representation of phosphine ligand sizes. The steric parameters (cone angle and E_R values) alone, and in conjunction with electronic parameters, are correlated with experimental data.     

Electrospray-Ionization Mass Spectrometry: Detection of a radical cation present in solution: New results on the chemistry of (tetrahydropteridinone)-metal complexes

This paper marks the first reported detection of radical cations by Electrospray-Ionization Mass Spectrometry (ESI-MS). Electron Spin Resonance (ESR) measurements have proven that the detected radical cation existed already in solution and has not been generated by the electrospray ionization technique. However, we observed that the radical cation can be generated by changes in the ionization conditions. A molar mixture of 2-amino-5,6,7,8-tetrahydro-5-methylpterin-4(4H)-one dihydrochloride ( = 5,6,7,8-tetrahydro-N(5)-methylpterin-2 HCl, N(5)-MTHP-2 HCl), and tris(pentane-2,4-dionato)iron(III) in MeCN at pH 2–3 leads to the formation of a [bis(pentane-2,4-dionato)(2-amino-5,6,7,8-tetrahydro-5-methylpteridin-4 (4H)-one)]iron complex ( = [bis(pentane-2,4-dionato) (5,6,7,8-tetrahydro-N(5)-methylpteridin)]iron complex) which can be detected by ESI-MS. The results suggest that this complex might be an Fe^II radical cation, which could possibly be a suitable model complex for the active center of the phenylalanine hydroxylase. In the same solution, the stable radical cation of N(5)-MTHP is identified by ESI-MS and ESR.     

Does CH prefer a C2v rather than a Cs structure?

The closely related C_s ( 1 ) and C_2v ( 3 ) structures of CH have been reinvestigated at many ab initio levels using MP2/6-31G** and MP2/6-311 + + G(2df, 2pd) geometries. The largest basis sets employed were 6-311G(3df, 2p), 6-311 + + G(3df, 3pd), and the Dunning “correlation consistent” polarized triple-split valence basis set (cc-pVTZ). Electron correlation was probed at the MP4 level, but the QCISD method was also used with the largest basis sets. While electron correlation favors 3 over 1 by about 2 kcal/mol, the correlated relative energies with all basis sets employed range from 0.36–1.03 kcal/mol in favor of 1 . The best estimate of this difference, 0.86 kcal/mol, is essentially identical with the (scaled) zero-point energy difference, 0.84 kcal/mol, favoring 3 over 1 . These results indicate that 1 and 3 have almost exactly the same energy at 0 K. Our best value for the dissociation energy of CH is 42.0 kcal/mol [QCISD(T)/6-311 + + G(3df, 3pd)//MP2(fu)/6-311 + + G(2df, 2pd), corrected to 298 K], which agrees very well with the experimental value. © 1992 by John Wiley & Sons, Inc.     

A generic approach to the impurity profiling of drugs using standardised and independent capillary zone electrophoresis methods coupled to electrospray ionisation mass spectrometry

Three standardised, capillary zone electrophoresis-electrospray ionisation mass spectrometry (CZE-ESI-MS) methods were developed for the analysis of six drug candidates and their respective process-related impurities comprising a total of 22 analytes with a range of functional groups and lipophilicities. The selected background electrolyte conditions were found to be: 60/40 v/v 10 mM ammonium formate pH 3.5/organic, 60/40 v/v 10 mM ammonium acetate pH 7.0/organic and 10 mM piperidine, pH 10.5, where the organic solvent is 50/50 v/v methanol/acetonitrile. The coaxial sheath flow consisted of either 0.1% v/v formic acid in 50/50 v/v methanol/water, or 10 mM ammonium acetate in 50/50 v/v methanol/water, depending on the mixture being analysed. Factor analysis and informational theory were used to quantify the orthogonality of the methods and predict their complementarities. The three selected CZE-ESI-MS methods allowed the identification of 21 out of 22 of all the drug candidates and their process-related impurities and provided orthogonality with four established high-performance liquid chromatography-mass spectrometry (HPLC-MS) methods. These methodologies therefore form the basis of a generic approach to impurity profiling of pharmaceutical drug candidates and can be applied with little or no analytical method development, thereby offering significant resource and time savings.     

Synthesis of 8-substituted naphtho[2,1-b]thiophenes with cationic side chains at position 4

A series of five 8-substituted α-[bis(2-hydroxyethyi)aminoethyl]naphtho[2,1-b]thiophenes 7 and a series of seven N-(3-dimethylaminopropyl)-8-substituted naphtho[2,1-b]thiophene-4-carboxamides 8 have been synthesized. The naphtho[2,1-b]thiophene-4-carboxylic acids 4 were prepared by photooxidative cyclization of α-(2-thienyi)-β-arylacrylic acids 3. The carboxylic acids 4 were converted by a conventional five step route involving α-bromoketone intermediates to the a-[bis(2-hydroxyethyl)aminomethyl]-8-substituted naphtho-[2,1-6]thiophene-4-methanols 7 and by a standard two-step amide preparation to the N-(3-dimethylaminopropyl)-8-substituted naphtho[2,1-6]thiophene-4-carboxamides 8 .     

Quantitative determination of limonin in citrus juices by HPLC using computerized solvent optimization

The commercially available computer program, Drylab, for optimization of separations by high-performance liquid chromatography (HPLC) using binary solvent mixtures is used to improve an HPLC method for separation of the bitter principle, limonin, in grapefruit and navel orange juices. Best conditions for separation of limonin in a reasonable time are 30 to 32% acetonitrile in water at 0.9 mL/min using a 5-micron C18 column 10 cm long. These conditions are used to analyze grapefruit and navel orange juice samples, and these HPLC results are compared with values determined by enzyme immunoassay or thin-layer chromatography (TLC) on the same samples.