The frequency scale of speech intonation.

In intonation research, prominence-lending pitch movements have either been described on a linear or on a logarithmic frequency scale. An experiment has been carried out to check whether pitch movements in speech intonation are perceived on one of these two scales or on a psychoacoustic scale representing the frequency selectivity of the auditory system. This last scale is intermediary between the other two scales. Subjects matched the excursion size of prominence-lending pitch movements in utterances resynthesized in different pitch registers. Their task was to adjust the excursion size in a comparison stimulus in such a way that it lent equal prominence to the corresponding syllable in a fixed test stimulus. The comparison stimulus and the test stimulus had pitches running parallel on either the logarithmic frequency scale, the psychoacoustic scale, or the linear frequency scale. In one-half of the experimental sessions, the test stimulus was presented in the low register, while the comparison stimulus was presented in the high register, and, conversely, for the other half of the sessions. The result is that, in all cases, stimuli are matched in such a way that the average excursion sizes in different registers are equal on the psychoacoustic scale.     

Angular dependent rayleigh scattering of Mössbauer radiation on proteins

RSMR experiments with⁵⁷Fe radiation were performed on myoglobin. An areasensitive detector was employed for simultaneous angular dependent collection of the scattered quanta up to a maximum angle 2θ of 17‡. Experimental data of polycrystalline and lyophilized myoglobin are compared with computer calculations of the scattering which are based on the atomic coordinates determined by X-ray structure analysis. Special attention has been paid to the influence of coherence effects from collectively moving parts of the protein. A simple model is introduced in order to take into account these segmental motions. Our first results indicate that the sizes of collectively moving segments are comparable with spheres of about 6 å in diameter in dry myoglobin. In myoglobin crystals, where the molecules are surrounded by large hydration shells, the movements appear to be correlated in segments with sizes comparable to helices.

     

Confinement in a planar waveguide with porous silicon omnidirectional mirrors as confining walls

We present the design and study of waveguide structures based on porous silicon where the light confinement is not due to the usual total reflection effect but to the use of photonic crystals (PCs) as confining walls. These PC are omnidirectional mirrors (OMs), consisting of the periodic repetition of two porous silicon layers with different refractive indices and thicknesses. They reflect the radiation for all angles of incidence within a frequency range called the omnidirectional band gap (OBG). We have followed the PC formalism to investigate the properties of the OM as a multimode waveguide: the number of modes within the band gap, their field spatial distribution and their confinement as a function of the frequency and the core thickness.     

Pediatric Laryngotracheal Stenosis and Airway Reconstruction: A Review of Voice Outcomes, Assessment, and Treatment Issues

Laryngotracheal stenosis is defined as a congenital or acquired narrowing of the airway. Congenital causes may include subglottic membranous or cartilaginous narrowing. Acquired causes may include trauma due to prolonged endotracheal or tracheal intubation or laryngotracheal injury. Although advances have been made over the past 30 years in reconstructive surgeries to improve airway patency in these patients, long-term laryngeal function for voice production is not well defined in this population. This review examines causes, symptoms and signs, and methods for diagnosing laryngotracheal stenosis. Surgical management procedures are briefly summarized. The current literature on voice outcomes is summarized. The predominant voice characteristics in the population are presented, although results are challenged by the heterogeneity of voice presentation and paucity of data from instrumental measures. Considerations for subjective and instrumental assessment, measures of quality of life, instrumental methods, and treatment options specific to the needs of this population are discussed. Research strategies to identify long-term outcomes of surgical and behavioral treatments in this population are posed.     

Effects of sputter deposition parameters and post-deposition annealing on the electrical characteristics of LaAlO3 dielectric films on Si

The influence of processing parameters on the electrical characteristics of RuO₂/LaAlO₃/Si metal-oxide-semiconductor structures was investigated. In particular, the sputtering regime during deposition of LaAlO₃ on Si and the atmosphere used in the post-deposition annealing step were addressed by determining capacitance-voltage and gate current-voltage characteristics. These results were correlated with compositional information obtained by Rutherford backscattering spectrometry and nuclear reaction analysis. A post-deposition annealing step in oxygen at 600 °C resulted in better electrical characteristics of the final structure as compared to the same treatment performed in nitrogen. This result is explained by oxygen ability to heal oxygen vacancies in the LaAlO₃ film, especially at the dielectric/semiconductor interface region. A thermalized sputtering regime during deposition of LaAlO₃ on Si leads to capacitors with electrical characteristics superior to those deposited in ballistic regime. PACS 77.84.Dy; 81.15.Cd; 81.40.Gh; 73.40.Qv; 82.80.Yc     

Smart Geodesic Tracing in GRworkbench

We have developed a new tool for numerical work in General Relativity: GRworkbench. We discuss how GRworkbench's implementation of a numerically-amenable analogue to Differential Geometry facilitates the development of robust and chart-independent numerical algorithms. We consider, as an example, geodesic tracing on two charts covering the exterior Schwarzschild space-time.     

A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Lateral interactions in the thermal desorption of H2 from clean Cu/Ni(110) alloy surfaces

The adsorption of hydrogen on a clean Cu10%/Ni90% (110) alloy single crystal was studied using flash desorption spectroscopy (FDS), Auger electron spectroscopy (AES), and work function measurements. Surface compositions were varied from 100% Ni to 35% Ni. The hydrogen chemisorption on a-surface of 100% nickel revealed strong attractive interactions between the hydrogen atoms in accordance with previous work on Ni(100). Three desorption states (β₁, β₂ and α) appeared in the desorption spectra. The highest temperature (α) state was occupied only after the initial population of the β₂-state. As the amount of copper was increased in the nickel substrate, desorption from the higher energy binding α-state was reduced, indicating a decrease in the attractive interactions among hydrogen atoms. The hydrogen coverage at saturation was not affected by the addition of copper to the nickel substrate until the copper concentration was greater than 25% at which a sharp reduction in saturation coverage occurred. This phenomenon was apparently due to the adsorption of hydrogen on Ni atoms followed by occupation of NiNi and CuNi bridged adsorption sites, while occupation of CuCu sites was restricted due to an energy barrier to migration.     

Comparisons between model equations for long waves

Summary Considered here are model equations for weakly nonlinear and dispersive long waves, which feature general forms of dispersion and pure power nonlinearity. Two variants of such equations are introduced, one of Korteweg-de Vries type and one of regularized long-wave type. It is proven that solutions of the pure initial-value problem for these two types of model equations are the same, to within the order of accuracy attributable to either, on the long time scale during which nonlinear and dispersive effects may accumulate to make an order-one relative difference to the wave profiles.This research was supported in part by the National Science Foundation. A considerable portion of the project was completed while the first author was resident at the Institute for Mathematics and Its Applications, University of Minnesota.     

The determination of the past and the future of a physical system in quantum mechanics

The determination of the past and the future of a physical system are complementary aims of measurements. An optimal determination of the past of a system can be achieved by an informationally complete set of physical quantities. Such a set is always strongly noncommutative. An optimal determination of the future of a physical system can be obtained by a Boolean complete set of quantities. The two aims can be reconciled to a reasonable degree with using unsharp measurements.This work was partly supported by the Bundesministerium für Forschung und Technologie, Bonn, the Research Institute for Theoretical Physics, Helsinki, and the University of Turku Foundation, Turku.