19F NMR study of the equilibria and dynamics of the Al3+/F- system

A careful reinvestigation by high-field 19F NMR (470 MHz) spectroscopy has been made of the Al3+/F- system in aqueous solution under carefully controlled conditions of pH, concentration, ionic strength (I), and temperature. The 19F NMR spectra show five distinct signals at 278 K and I = 0.6 M (TMACl) which have been attributed to the complexes AlFi(3-i)+(aq) with i < or = 5. There was no need to invoke AlFi(OH)j(3-i-j)+ mixed complexes in the model under our experimental conditions (pH < or = 6.5), nor was any evidence obtained for the formation of AlF6(3-)(aq) at very high ratios of F-/Al3+. The stepwise equilibrium constants obtained for the complexes by integration of the 19F signals are in good agreement with literature data given the differences in medium and temperature. In I = 0.6 M TMACl at 278 K and in I = 3 M KCl at 298 K the log Ki values are 6.42, 5.41, 3.99, 2.50, and 0.84 (for species i = 1-5) and 6.35, 5.25, and 4.11 (for species i = 1-3), respectively. Disappearance of the 19F NMR signals under certain conditions was shown to be due to precipitation. Certain 19F NMR signals exhibit temperature- and concentration-dependent exchange broadening. Detailed line shape analysis of the spectra and magnetization transfer measurements indicate that the kinetics are dominated by F- exchange rather than complex formation. The detected reactions and their rate constants are AlF2(2+) + *F- reversible AlF*F2+ + F- (k02 = (1.8 +/- 0.3) x 10(6) M-1 s-1), AlF3(0) + *F- reversible AlF2*F0 + F- (k03 = (3.9 +/- 0.9) x 10(6) M-1 s-1), and AlF3(0) + H*F reversible AlF2*F0 + HF (kH03 = (6.6 +/- 0.5) x 10(4) M-1 s-1). The rates of these exchange reactions increase markedly with increasing F- substitution. Thus, the reactions of AlF2+(aq) were too inert to be detected even on the T1 NMR time scale, while some of the reactions of AlF3(0)(aq) were fast, causing large line broadening. The ligand exchange appears to follow an associative interchange mechanism. The cis-trans isomerization of AlF2+(aq), consistent with octahedral geometry for that complex, is slowed sufficiently to be observed at temperatures around 270 K. Difference between the Al3+/F- system and the much studied Al3+/OH- system are briefly commented on.     

Convenient and High-Yielding Preparations of Mono(5-carboxy-2-ethylpentyl) Phthalate and its Ring-Deuterated Isomer – The “Third” Major Metabolite of Bis(2-ethylhexyl) Phthalate

The synthesis of an oxidative major metabolite of bis(2-ethylhexyl) phthalate is described. The target molecule and its ring-deuterated isomer were obtained via acylation of the appropriate -hydroxy benzyl ester or the corresponding carboxylate with phthalic anhydride or phthalic anhydride-d₄. All transformation steps proceed with high yields.     

Analysis of acyclovir by high performance capillary electrophoresis with on-column amperometric detection

The separation of acyclovir (ACV) by high performance capillary electrophoresis (HPCE) with on-column amperometric detection using alpha-amino-5-mercapto-3,4-dithiazole (AMD) as internal standard is described. The calibration line was linear in the range of 0.5-20 mg/L of ACV. The detection limit was 0.15 mg/L of ACV. Its recovery ranged from 98 to 101% with relative standard deviations (RSDs) from 1.9 to 3.2% (n = 5). This method was successfully used for determining ACV in some pharmaceuticals and human urine. Comparable results with HPCE with ultraviolet (UV) detection and amperometric detection were obtained.     

Chloroaqua Complexes [M3S4(H2O)9?xClx](4?x)+ (M = Mo, W; x = 4, 6, 7) and Their Supramolecular Compounds with Cucur[8]uril

Compounds of trigonal cluster chloroaqua complexes with cucurbit[8]uril were synthesized by slowly evaporating HCl solutions of chalcogenides heterometallic cubane cluster complexes of molybdenum and tungsten with cucurbit[8]uril in air; the complexes were characterized by X-ray diffraction analysis: (H₃O)₈[Mo₃S₄(H₂O)_2.5Cl_6.5]₂Cl(PdCl₄)·(C₄₈H₄₈N₃₂O₁₆)· 29H₂O (a = 13.3183(17) Å, b = 13.7104(18) Å, c = 18.225(3) Å; α = 80.263(3)°, β = 77. 958(3)°, γ = 87.149(4)°, V = 3207.4(7) ų, space group P , Z = 1, ρ(calc) = 1.900 g/cm³), (H₃O)₄ [Mo₃S₄(H₂O)₃Cl₆]₂·(C₄₈H₄₈N₃₂O₁₆)₃·68H₂O (a = 21.413(6) Å, c = 49.832(10) Å; γ = 120°, V = 19788(8) ų, space group R , Z = 3, ρ(calc) = 1.695 g/cm³), (H₃O)₆ [Mo₃S₄(H₂O)₃Cl₆]₂Cl₂·(C₄₈H₄₈N₃₂O₁₆)·12H₂O (a = 15.881(2) Å, b = 17.191(2) Å, c = 23.276(4) Å; β = 98.865(15)°, V = 6278.7(15) ų, space group P2₁/c, Z = 2, ρ(calc) = 1.638 g/cm³), [W₃S₄(H₂O)₅Cl₄]₂·(C₄₈H₄₈N₃₂O₁₆)₃·35H₂O (a = 21.038(3) Å; α = 61.20(1)°, V = 6762.0(14) ų, space group R , Z = 1, ρ(calc) = 1.582 g/cm³). The [Mo₃S₄(H₂O)₃Cl₆]²⁻ anion complex was isolated as three geometrical isomers.Original Russian Text Copyright © 2004 by E. V. Chubarova, D. G. Samsonenko, H. G. Platas, F. M. Dolgushin, A. V. Gerasimenko, M. N. Sokolov, Z. A. Starikova, M. Yu. Antipin, and V. P. Fedin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 6, pp. 1049–1058, November–December, 2004.     

Z/E-photoisomerizations of olefins with 4npi- or (4n + 2)pi-electron substituents: zigzag variations in olefin properties along the T(1) state energy surfaces

[Figure: see text]. A quantum chemical study has been performed to assess changes in aromaticity along the T1 state Z/E-isomerization pathways of annulenyl-substituted olefins. It is argued that the point on the T1 energy surface with highest substituent aromaticity corresponds to the minimum. According to Baird (J. Am. Chem. Soc. 1972, 94, 4941), aromaticity and antiaromaticity are interchanged when going from S0 to T1. Thus, olefins with S0 aromatic substituents (set A olefins) will be partially antiaromatic in T1 and vice versa for olefins with S0 antiaromatic substituents (set B olefins). Twist of the C=C bond to a structure with a perpendicular orientation of the 2p(C) orbitals (3p*) in T1 should lead to regaining substituent aromaticity in set A and loss of aromaticity in set B olefins. This hypothesis is verified through quantum chemical calculations of T1 energies, geometries (bond lengths and harmonic oscillator measure of aromaticity), spin densities, and nucleus independent chemical shifts whose differences along the T1 PES display zigzag dependencies on the number of -electrons in the annulenyl substituent of the olefin. Aromaticity changes are reflected in the profiles of the T1 potential energy surfaces (T1 PESs) for Z/E-isomerizations because olefins in set A have minima at 3p* whereas those in set B have maxima at such structures. The proper combination (fusion) of the substituents of set A and B olefins could allow for design of novel optical switch compounds that isomerize adiabatically with high isomerization quantum yields.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

HPLC-NMR of fatty alcohol ethoxylates

The application of HPLC-NMR for the analysis of a mixture of fatty alcohol ethoxylates (FAEs) is described. The use of the new generation, cryogenically cooled probes is investigated in respect of the sensitivity advantage that they provide. The FAE mixture is separated using liquid chromatography at the critical point of adsorption. The ability of the method to differentiate between the different end groups and the degree of polymerization of the mixture constituents is investigated. Both on-flow and stop-flow HPLC-NMR techniques were used together with two-dimensional NMR spectroscopy. The results are compared with those obtained by using an evaporative light scattering detector for the HPLC.     

Identification and determination of active components in Angelica dahurica Benth and its medicinal preparation by capillary electrophoresis

A micellar electrokinetic capillary chromatography (MECC) method for the separation of three active components, imperatorin (IM), isoimperatorin (IO) and scopoletin (SC), in Angelica dahurica Benth and its preparation was developed. The optimum separation for these analytes was achieved using 10 mM borate, 20 mM SDS and 10%(v/v) acetonitrile, with applied voltage of 22 kV. All experiments were performed using a 50.0 cm (42.5 cm effective length)x75 mum I.D. fused-silica capillary. The linear calibration range was 12.0-800.0 mug ml(-1) for IM, 10.0-850.0 mug ml(-1) for IO and 3.5-600.0 mug ml(-1) for SC. The recoveries of three constituents were from 91.3 to 108.7%. Also, the dissociation constant (pKa) of SC was determined by the CE method established in this paper.