Water wetting transition parameters of perfluorinated substrates with periodically distributed flat-top microscale obstacles

Superhydrophobicity is obtained on photolithographically structured silicon surfaces consisting of flat-top pillars after a perfluorosilanization treatment. Systematic static contact angle measurements were carried out on these surfaces as a function of pillar parameters that geometrically determine the surface roughness, including pillar height, diameter, top perimeter, overall filling factor, and disposition. In line with thermodynamics models, two regimes of static contact angles are observed varying each parameter independently: the "Cassie" regime, in which the water drop sits suspended on top of the pillars (referred to as composite), corresponding to experimental contact angles greater than 140-150 degrees, and the "Wenzel" regime, in which water completely wets the asperities (referred to as wetted), corresponding to lower experimental contact angles. A transition between the Cassie and Wenzel regimes corresponds to a set of well-defined parameters. By smoothly depositing water drops on the surfaces, this transition is observed for surface parameter values far from the calculated ones for the thermodynamic transition, therefore offering evidence for the existence of metastable composite states. For all studied parameters, the position of the experimental transition correlates well with a rough estimation of the energy barrier to be overcome from a composite metastable state in order to reach the thermodynamically favored Wenzel state. This energy barrier is estimated as the surface energy variation between the Cassie state and the hypothetical composite state with complete filling of the surface asperities by water, keeping the contact angle constant.     

Electronic structure calculations on lithium battery electrolyte salts

New lithium salts for non-aqueous liquid, gel and polymeric electrolytes are crucial due to the limiting role of the electrolyte in modern lithium batteries. The solvation of any lithium salt to form an electrolyte solution ultimately depends on the strength of the cation-solvent vs. the cation-anion interaction. Here, the latter is probed via HF, B3LYP and G3 theory gas-phase calculations for the dissociation reaction: LiX <--> Li(+) + X(-). Furthermore, a continuum solvation method (C-PCM) has been applied to mimic solvent effects. Anion volumes were also calculated to facilitate a discussion on ion conductivities and cation transport numbers. Judging from the present results, synthesis efforts should target heterocyclic anions with a size of ca. 150 A(3) molecule(-1) to render new highly dissociative lithium salts that result in electrolytes with high cation transport numbers.     

Oxide nanotubes on Ti-Ru alloys: strongly enhanced and stable photoelectrochemical activity for water splitting

The present work shows a significant enhancement of the photoelectrochemical water-splitting performance of anodic TiO(2) nanotube layers grown on low concentration (0.01-0.2 at% Ru) Ti-Ru alloys. Under optimized preparation conditions (0.05 at% Ru, 450 °C annealing) the water splitting rate of the oxide tubes could be 6-fold increased. Moreover, the beneficial effect is very stable with illumination time; this is in contrast to other typical doping approaches of TiO(2).     

Proton mobility and stability of water clusters containing the bisulfate anion, HSO4(-)(H2O)n

Bisulfate water clusters, HSO(4)(-)(H(2)O)(n), have been studied both experimentally by a quadrupole time-of-flight mass spectrometer and by quantum chemical calculations. For the cluster distributions studied, there are some possible "magic number" peaks, although the increase in abundance compared to their neighbours is small. Experiments with size-selected clusters with n = 0-25, reacting with D(2)O at a center-of-mass energy of 0.1 eV, were performed, and it was observed that the rate of hydrogen/deuterium exchange is lower for the smallest clusters (n < 8) than for the larger (n > 11), with a transition taking place in the range n = 8-11. We propose that the protonic defect of the bisulfate ion remains rather stationary unless the degree of hydration reaches a given level. In addition, it was observed that H/D scrambling becomes close to statistically randomized for the larger clusters. Insight into this size dependency was obtained by B3LYP/6-311++G(2d,2p) calculations for HSO(4)(-)(H(2)O)(n) with n = 0-10. In agreement with experimental observations, these calculations suggest pronounced effectiveness of a 'see-saw mechanism' for pendular proton transfer with increasing HSO(4)(-)(H(2)O)(n) cluster size.     

Injection profiles in liquid chromatography II: predicting accurate injection-profiles for computer-assisted preparative optimizations

In computer assisted optimization of liquid chromatography it has been known for some years that it is important to use experimental injection profiles, instead of rectangular ones, in order to calculate accurate elution bands. However, the incorrectly assumed rectangular profiles are still mostly used especially in numerical optimizations. The reason is that the acquisition of injection profiles, for each injection volume and each flow rate considered in a computer-assisted optimization requires a too large number of experiments. In this article a new function is proposed, which enables highly accurate predictions of the injection profiles and thus more accurate computer optimizations, with a minimum experimental effort. To model the injection profiles for any injection volume at a constant flow rate, as few as two experimental injection profiles are required. If it is desirable to also take the effect of flow rate on the injection profiles into account, then just two additional experiments are required. The overlap between fitted and experimental injection profiles at different flow rates and different injection volumes were excellent, more than 90%, using experimental injection profiles from just four different injection volumes at two different flow rates. Moreover, it was demonstrated that the flow rate has a minor influence on the injection profiles and that the injection volume is the main parameter that needs to be accounted for.     

Selected ion flow tube study of ion-molecule reactions of N(+)(3P) and Kr+ with C3 hydrocarbons propane, propene, and propyne

Reactions of (14)N(+)((3)P), (15)N(+)((3)P), and Kr(+) with propane, propene, and propyne were studied using the selected ion flow tube, SIFT, technique. Thermal rate constants in all N(+)/C(3) systems were k = (2 ± 0.4) × 10(-9) cm(3) molecule(-1) s(-1), close to the collisional rate constants. With propane and propene, only hydrocarbon ions were found among the products of reactions with N(+); in propyne about 15% of the products were N-containing ions (C(3)H(2)N(+), C(2)H(4)N(+), C(2)H(3)N(+), C(2)H(2)N(+)), and the rest were hydrocarbon ions. A comparison with product ions from electron transfer between Kr(+) (of recombination energy similar to that for N(+)((3)P)) and the C(3) hydrocarbons and further analysis of the results led to an estimation of an approximate ratio of electron transfer vs hydride-ion transfer reactions leading to the hydrocarbon product ions: in propane the ratio was 2:1, in propene 3:1, and in propyne 5:1. A fraction of product ions resulted from reactions leading to the excited neutral product N*.     

Thermal characterization of aminium nitrate nanoparticles

Amines are widely used and originate from both anthropogenic and natural sources. Recently, there is, in addition, a raised concern about emissions of small amines formed as degradation products of the more complex amines used in CO(2) capture and storage systems. Amines are bases and can readily contribute to aerosol mass and number concentration via acid-base reactions but are also subject to gas phase oxidation forming secondary organic aerosols. To provide more insight into the atmospheric fate of the amines, this paper addresses the volatility properties of aminium nitrates suggested to be produced in the atmosphere from acid-base reactions of amines with nitric acid. The enthalpy of vaporization has been determined for the aminium nitrates of mono-, di-, trimethylamine, ethylamine, and monoethanolamine. The enthalpy of vaporization was determined from volatility measurements of laboratory generated aerosol nanoparticles using a volatility tandem differential mobility analyzer set up. The determined enthalpy of vaporization for aminium nitrates range from 54 up to 74 kJ mol(-1), and the calculated vapor pressures at 298 K are around 10(-4) Pa. These values indicate that aminium nitrates can take part in gas-to-particle partitioning at ambient conditions and have the potential to nucleate under high NO(x) conditions, e.g., in combustion plumes.     

Why ultra high performance liquid chromatography produces more tailing peaks than high performance liquid chromatography, why it does not matter and how it can be addressed

The purpose of this study is to demonstrate, with experiments and with computer simulations based on a firm chromatographic theory, that the wide spread perception of that the United States Pharmacopeia tailing factor must be lower than 2 (T(f)<2) is questionable when using the latest generation of LC equipment. It is shown that highly efficient LC separations like those obtained with sub-2 μm porous and 2.7 μm superficially porous particles (UHPLC) produce significantly higher T(f)-values than the corresponding separation based on 3 μm porous particles (HPLC) when the same amount of sample is injected. Still UHPLC separations provide a better resolution to adjacent peaks. Expressions have been derived that describe how the T(f)-value changes with particle size or number of theoretical plates. Expressions have also been derived that can be used to scale the injection volume based on particle size or number of theoretical plates to maintain the T(f)-value when translating a HPLC separation to the corresponding UHPLC separation. An aspect that has been ignored in previous publications. Finally, data obtained from columns with different age/condition indicate that T(f)-values should be complemented by a peak width measure to provide a more objective quality measure.     

Slow excited state injection and charge recombination at star-shaped ruthenium polypyridyl compounds--TiO2 interfaces

The excited states of two star-shaped nanometre-sized ruthenium polypyridyl compounds were largely unchanged when anchored to nanocrystalline TiO(2) thin films due to a highly symmetrical and rigid ligand structure that isolated the chromophoric core from the semiconductor. Interfacial electron transfer occurred on unusually slow time scales.