Multichip vertical-external-cavity surface-emitting lasers: a coherent power scaling scheme

We propose an efficient coherent power scaling scheme, the multichip vertical-external-cavity surface-emitting laser (VECSEL), in which the waste heat generated in the active region is distributed on multi-VECSEL chips such that the pump level at the thermal rollover is significantly increased. The advantages of this laser are discussed, and the development and demonstration of a two-chip VECSEL operating around 970 nm with over 19 W of output power is presented.     

Recreational runners with patellofemoral pain exhibit elevated patella water content

Increased bone water content resulting from repetitive patellofemoral joint overloading has been suggested to be a possible mechanism underlying patellofemoral pain (PFP). To date, it remains unknown whether persons with PFP exhibit elevated bone water content. The purpose of this study was to determine whether recreational runners with PFP exhibit elevated patella water content when compared to pain-free controls. Ten female recreational runners with a diagnosis of PFP (22 to 39 years of age) and 10 gender, age, weight, height, and activity matched controls underwent chemical-shift-encoded water-fat magnetic resonance imaging (MRI) to quantify patella water content (i.e., water-signal fraction). Differences in bone water content of the total patella, lateral aspect of the patella, and medial aspect of the patella were compared between groups using independent t tests. Compared with the control group, the PFP group demonstrated significantly greater total patella bone water content (15.4 ± 3.5% vs. 10.3 ± 2.1%; P = 0.001), lateral patella water content (17.2 ± 4.2% vs. 11.5 ± 2.5%; P = 0.002), and medial patella water content (13.2 ± 2.7% vs. 8.4 ± 2.3%; P < 0.001). The higher patella water content observed in female runners with PFP is suggestive of venous engorgement and elevated extracellular fluid. In turn, this may lead to an increase in intraosseous pressure and pain.     

Neutral-pion photoproduction off protons in the energy range 0.3 GeV<E(gamma)<3 GeV

Single pi(0) photoproduction has been studied with the CB-ELSA experiment at Bonn using tagged photon energies between 0.3 and 3.0 GeV. The experimental setup covers a very large solid angle of approximately 98% of 4pi. Differential cross sections dsigma/dOmega have been measured. Complicated structures in the angular distributions indicate a variety of different resonances being produced in the s channel intermediate state gammap-->N(*)(Delta(*))-->ppi(0). A combined analysis including the data presented in this letter along with other data sets reveals contributions from known resonances and evidence for a new resonance N(2070)D15.     

A correlation for burn time of aluminum particles in the transition regime

A study of the combustion times for aluminum particles in the size range of 3–11 μm with oxygen, carbon dioxide, and water vapor oxidizers at high temperatures (>2400 K), high pressures (4–25 atm), and oxidizer composition (15–70% by volume in inert diluent) in a heterogeneous shock tube has generated a correlation valid in the transition regime. The deviation from diffusion limited behavior and burn times that could otherwise be accurately predicted by the widely accepted Beckstead correlation is seen, for example, in particles below 20 μm, and is evidenced by the lowering of the diameter dependence on the burn time, a dependence on pressure, and a reversal of the relative oxidizer strengths of carbon dioxide and water vapor. The strong dependence on temperature of burn time that is seen in nano-Al is not observed in these micron-sized particles. The burning rates of aluminum in these oxidizers can be added to predict an overall mixture burnout time adequately. This correlation should extend the ability of modelers to predict combustion rates of particles in solid rocket motor environments down to particle diameters of a few microns.     

Hypernuclear physics at overline{mbox{P}} anda

Samples obtained as a result of the valleriite synthesis process under different conditions (temperature and proportion Cu:Fe:Mg in the initial mixture) were investigated by ⁵⁷Fe M?ssbauer spectroscopy with attraction data of X-ray diffraction. Parameters of hyperfine interactions for valleriite were determined and crystal chemical identification of ⁵⁷Fe subspectra was carried out. It was found that valleriite was formed in samples synthesized at 150°C and 180°C and not formed in samples synthesized at 250°C.     

Unconditionally convergent nonlinear solver for hyperbolic conservation laws with S-shaped flux functions

This paper addresses the convergence properties of implicit numerical solution algorithms for nonlinear hyperbolic transport problems. It is shown that the Newton–Raphson (NR) method converges for any time step size, if the flux function is convex, concave, or linear, which is, in general, the case for CFD problems. In some problems, e.g., multiphase flow in porous media, the nonlinear flux function is S-shaped (not uniformly convex or concave); as a result, a standard NR iteration can diverge for large time steps, even if an implicit discretization scheme is used to solve the nonlinear system of equations. In practice, when such convergence difficulties are encountered, the current time step is cut, previous iterations are discarded, a smaller time step size is tried, and the NR process is repeated. The criteria for time step cutting and selection are usually based on heuristics that limit the allowable change in the solution over a time step and/or NR iteration. Here, we propose a simple modification to the NR iteration scheme for conservation laws with S-shaped flux functions that converges for any time step size. The new scheme allows one to choose the time step size based on accuracy consideration only without worrying about the convergence behavior of the nonlinear solver. The proposed method can be implemented in an existing simulator, e.g., for CO₂ sequestration or reservoir flow modeling, quite easily. The numerical analysis is confirmed with simulation studies using various test cases of nonlinear multiphase transport in porous media. The analysis and numerical experiments demonstrate that the modified scheme allows for the use of arbitrarily large time steps for this class of problems.     

Mechanical elastic constants and diffraction stress factors of macroscopically elastically anisotropic polycrystals: the effect of grain-shape (morphological) texture

The effect of the grain-shape (‘morphological’) texture of a polycrystal on the mechanical elastic constants and diffraction (X-ray) stress factors is investigated. To this end, the Eshelby–Kröner grain interaction model originally devised for polycrystals consisting of spherical grains is extended to ellipsoidal grain morphology. Results obtained for the mechanical elastic constants show that a polycrystal consisting of ellipsoidal grains with their principal axes aligned along common directions (i.e. when an ideal grain-shape texture occurs) is macroscopically elastically anisotropic. Also the diffraction (X-ray) stress factors are affected by the grain-shape texture; they reflect the macroscopic elastic anisotropy by resulting in nonlinear so-called sin²?ψ plots. In general, a grain-shape texture can have a moderate effect on the mechanical elastic constants and a pronounced effect on the diffraction elastic constants, depending on the crystal symmetry and single-crystal elastic anisotropy.     

Einige Aspekte der Entwicklung radiometrischer Analysen- und Detektionsverfahren

Die Ausnutzung von Quanten- und Teilchenstrahlung zur Analyse von Stoiffverteilungen und Stoffzusammensetzungen hat im vergangenen Jahrzehnt einen beträctlichen und fast unübersehbaren Umfang angenommen.

Es werden mögliche Schicerpunkie der zukünftigen Anforderungen an solche Analysenverfahren — die sich aus der modernen Forschung und Entvicklung ergeben — aufgezeichnet und die Anwendungsmöglichkeiten und der Entwicklungsstand spezieller Verfahren besprochen. Insbesondere werden Mönlichkeiten der Gesamtbilddurstellung, der Scanning-Verfahren und der Oberflächenuntersuchungen dünnster Schichten und Fragen der Strukluraufklärung, der chemischen Bindungen bzw. Bindungskonfigurationen diskutiert.     

Nonaffine deformation of inherent structure as a static signature of cooperativity in supercooled liquids

We unveil the existence of nonaffinely rearranging regions in the inherent structures (IS) of supercooled liquids by numerical simulations of model glass formers subject to static shear deformations combined with local energy minimizations. In the liquid state IS, we find a broad distribution of large rearrangements which are correlated only over small distances. At low temperatures, the onset of the cooperative dynamics corresponds to much smaller displacements correlated over larger distances. This finding indicates the presence of nonaffinely rearranging domains of relevant size in the IS deformation, which can be seen as the static counterpart of the cooperatively rearranging regions in the dynamics. This idea provides new insight into possible structural signatures of slow cooperative dynamics of supercooled liquids and supports the connections with elastic heterogeneities found in amorphous solids.     

Pattern formation in the ferrocyanide-iodate-sulfite reaction: the control of space scale separation

We revisit the conditions for the development of reaction-diffusion patterns in the ferrocyanide-iodate-sulfite bistable and oscillatory reaction. This hydrogen ion autoactivated reaction is the only example known to produce sustained stationary lamellar patterns and a wealth of other spatio-temporal phenomena including self-replication and localized oscillatory domain of spots, due to repulsive front interactions and to a parity-breaking front bifurcation (nonequilibrium Ising-Bloch bifurcation). We show experimentally that the space scale separation necessary for the observation of stationary patterns is mediated by the presence of low mobility weak acid functional groups. The presence of such groups was overlooked in the original observations made with hydrolyzable polyacrylamide gels. This missing information made the original observations difficult to reproduce and frustrated further experimental exploitation of the fantastic potentialities of this system. Using one-side-fed spatial reactors filled with agarose gel, we can reproduce all the previous pattern observations, in particular the stationary labyrinthine patterns, by introducing, above a critical concentration, well controlled amounts of polyacrylate chains in the gel network. We use two different geometries of spatial reactors (annular and disk shapes) to provide complementary information on the actual three-dimensional character of spatial patterns. We also reinvestigate the role of other feed parameters and show that the system exhibits both a domain of spatial bistability and of large-amplitude pH oscillations associated in a typical cross-shape diagram. The experimental method presented here can be adapted to produce patterns in the large number of oscillatory and bistable reactions, since the iodate-sulfite-ferrocynide reaction is a prototype of these systems.