Molecular level comparison of water extractives of maple and oak with negative and positive ion ESI FT‐ICR mass spectrometry

Soluble extractives in wood function to protect living trees from destructive agents and also contribute to wood color and fragrance. Some extractive components have biological activities with medical applications. They also play important roles in wood processing and related applications. To increase the knowledge of wood chemistry, maple and oak were extracted by water. Ultraviolet/visible (UV/vis) spectroscopy indicated the presence of a phenolic compound, resorcinol, in maple extractives having higher molecular mass and more aromatic components than oak extractives. Negative and positive electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT‐ICR‐MS) identified thousands of formulas in the two samples in the m/z range of 200 to 800. They mainly fall into the lignin‐like, carbohydrate‐like, and tannin‐like compound categories. The top 25 peaks (ie, formulas) with the highest relative magnitude in negative ESI represented nearly 50% of the summed total spectral magnitude of all formulas assigned in the maple and oak extractives. Furthermore, the base peak (ie, most abundant peak) accounted for about 14% of the total abundance in each wood sample. Literature comparisons identified 17 of 20 formulas in the top five peaks of the four spectra as specific bioactive compounds in trees and other plants, implying the potential to explore utilization of maple and oak extractives for functional and medicinal applications. The various profiling of the top 25 peaks from the two samples also suggested the possible application of FT‐ICR‐MS for detecting chemical markers useful in profiling and identification of wood types and sources.     

Lewis Pair Polymerization of Epoxides via Zwitterionic Species as a Route to High‐Molar‐Mass Polyethers

A dual catalytic setup based on N‐heterocyclic olefins (NHOs) and magnesium bis(hexamethyldisilazide) (Mg(HMDS)₂) was used to prepare poly(propylene oxide) with a molar mass (M_n) >500 000 g mol^?1, in some cases even >10⁶ g mol^?1, as determined by GPC/light scattering. This is achieved by combining the rapid polymerization characteristics of a zwitterionic, Lewis pair type mechanism with the efficient epoxide activation by the Mg^II species. Transfer‐to‐monomer, traditionally frustrating attempts at synthesizing polyethers with a high degree of polymerization, is practically removed as a limiting factor by this approach. NMR and MALDI‐ToF MS experiments reveal key aspects of the proposed mechanism, whereby the polymerization is initiated via nucleophilic attack by the NHO on the activated monomer, generating a zwitterionic species. This strategy can also be extended to other epoxides, including functionalized monomers.     

Phytochemical compounds and anti-corrosion activity of Veronica rosea

The aim of this work is the phytochemical study of the butanolic extract of the aerial parts of Veronica rosea. Four compounds 1–4 have been isolated using different chromatographic methods. The structures of these compounds were determined by NMR spectral analysis and mass spectroscopy. The adsorption and anticorrosion effects of this extract were investigated towards the corrosion of copper in 1 M HNO₃ aqueous by the weight loss technique and potentiodynamic polarization. The results showed that the butanolic extract is a good inhibitor and the inhibition efficiency increases with increasing of concentration of the inhibitor. The adsorption of this extract on the copper specimen surface was spontaneous and obeyed the Langmuir’s adsorption isotherm. Large value of adsorption equilibrium Constant (K _ads = 35 L g^?1) was obtained. The polarization experiments confirmed the data obtained by gravimetric weight-loss. Tafel plot of polarization curves indicates that the extract acts as a mixed type inhibitor.     

High‐Temperature Spray‐Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens

Living Micrococcus luteus (M. luteus) and Escherichia coli (E. coli) are encapsulated in poly(vinyl alcohol), poly(vinylpyrrolidone), hydroxypropyl cellulose, and gelatin by high‐temperature spray drying. The challenge is the survival of the bacteria during the standard spray‐drying process at temperatures of 150 °C (M. luteus) and 120 °C (E. coli). Raman imaging and transmission electron microscopy indicate encapsulated bacteria in hollow composite microparticles. The versatility of the spray‐dried polymer bacteria microparticles is successfully proved by standard polymer solution–processing techniques such as electrospinning, even with harmful solvents, to water‐insoluble polyacrylonitrile, polystyrene, poly(methyl methacrylate), and poly(vinyl butyrate) nanofiber nonwovens, which opens numerous new opportunities for novel applications.     

Reducing spatial data using an optimized regressive discrete Fourier series

With the development of optical measurement techniques it is possible to obtain vast amounts of data. In vibrometry applications in particular operational deflection shapes are often obtained with very high spatial resolution. Fortunately, many techniques exist to reduce (approximate) the measurement data. One of the most common techniques for evaluating optical measurement data is by means of a Fourier analysis. However, this technique suffers from what is known as leakage when a non-integer number of periods is considered. This gives rise to non-negligible errors, which will obviously hamper the accuracy of the synthesized shape. Another technique such as a discrete cosine transform, used in the widely spread -jpeg standard does not suffer these anomalies but can still prove erroneous at times. One of the more recent approaches is via a so-called regressive discrete Fourier series (introduced by Arruda) which suffers one disadvantage. The problem statement is nonlinear in the parameters and needs a priori information about the deflection shape. This can be resolved by using the optimized regressive discrete fourier series (ORDFS), introduced in this article, which uses a nonlinear least squares approach. In this article the method will be applied in particular to the reduction of data for laser vibrometer measurements performed on an inorganic phosphate cement (IPC) beam (1D), as well as on a car door (2D). The proposed technique will also be validated on simulations to illustrate the properties concerning compression ratio and synthesized mode shape error. The introduced method will be bench marked for compression ratio and synthesized deflection shape error with all prior mentioned techniques.     

Existence and analytical predictions of periodic motions in a periodically forced,nonlinear friction oscillator

The grazing bifurcation, stick phenomena and periodic motions in a periodically forced, nonlinear friction oscillator are investigated. The nonlinear friction force is approximated by a piecewise linear, kinetic friction model with the static force. The total forces for the input and output flows to the separation boundary are introduced, and the force criteria for the onset and vanishing of stick motions are developed through such input and output flow forces. The periodic motions of such an oscillator are predicted analytically through the corresponding mapping structure. Illustrations of the periodic motions in such a piecewise friction model are given for a better understanding of the stick motion with the static friction. The force responses are presented, which agreed very well with the force criteria. If the fully nonlinear friction force is modeled by several portions of piecewise linear functions, the periodically forced, nonlinear friction oscillator can be predicted more accurately. However, for the fully nonlinear friction force model, only the numerical investigation can be carried out.     

A study of radiative properties of fractal soot aggregates using the superposition T-matrix method

We employ the numerically exact superposition T-matrix method to perform extensive computations of scattering and absorption properties of soot aggregates with varying state of compactness and size. The fractal dimension, D_f, is used to quantify the geometrical mass dispersion of the clusters. The optical properties of soot aggregates for a given fractal dimension are complex functions of the refractive index of the material m, the number of monomers N_S, and the monomer radius a. It is shown that for smaller values of a, the absorption cross section tends to be relatively constant when D_f<2 but increases rapidly when D_f>2. However, a systematic reduction in light absorption with D_f is observed for clusters with sufficiently large N_S, m, and a. The scattering cross section and single-scattering albedo increase monotonically as fractals evolve from chain-like to more densely packed morphologies, which is a strong manifestation of the increasing importance of scattering interaction among spherules. Overall, the results for soot fractals differ profoundly from those calculated for the respective volume-equivalent soot spheres as well as for the respective external mixtures of soot monomers under the assumption that there are no electromagnetic interactions between the monomers. The climate-research implications of our results are discussed.     

Inertial clustering of particles in high-Reynolds-number turbulence

We report experimental evidence of spatial clustering of dense particles in homogenous, isotropic turbulence at high Reynolds numbers. The dissipation-scale clustering becomes stronger as the Stokes number increases and is found to exhibit similarity with respect to the droplet Stokes number over a range of experimental conditions (particle diameter and turbulent energy dissipation rate). These findings are in qualitative agreement with recent theoretical and computational studies of inertial particle clustering in turbulence. Because of the large Reynolds numbers a broad scaling range of particle clustering due to turbulent mixing is present, and the inertial clustering can clearly be distinguished from that due to mixing of fluid particles.     

Subdiffraction resolution in total internal reflection fluorescence microscopy with a grating substrate

We propose a fluorescence surface imaging system that presents a power of resolution beyond that of the diffraction limit without resorting to saturation effects or probe scanning. This is achieved by depositing the sample on an optimized periodically nanostructured substrate in a standard total internal reflection fluorescence microscope. The grating generates a high-spatial-frequency light grid that can be moved throughout the sample by changing the incident angle. An appropriate reconstruction procedure permits one to recover the fluorescence amplitude from the images obtained for various incidences. Simulations of this imaging system show that the resolution is not limited by diffraction but by the period of the grating.