Poly(vinylpyrrolidone)‐stabilized silver nanoparticles for strained‐silicon surface enhanced Raman spectroscopy

Poly(vinylpyrrolidone)‐stabilized silver nanoparticles deposited onto strained‐silicon layers grown on graded Si_1−xGe_x virtual substrates are utilized for selective amplification of the Si–Si vibration mode of strained silicon via surface‐enhanced Raman scattering spectroscopy. This solution‐based technique allows rapid, highly sensitive and accurate characterization of strained silicon whose Raman signal would usually be overshadowed by the underlying bulk SiGe Raman spectra. The analysis was performed on strained silicon samples of thickness 9, 17.5 and 42 nm using a 488 nm Ar⁺ micro‐Raman excitation source. The quantitative determination of strained‐silicon enhancement factors was also made. Copyright © 2011 John Wiley & Sons, Ltd.     

Temporal cleaning of a high-energy fiber-based ultrafast laser using cross-polarized wave generation

We report the use of cross-polarized wave generation to perform both pulse shortening and temporal cleaning of a high-energy ytterbium-doped fiber-based femtosecond laser system. The nonlinear processes allow both a highly efficient nonlinear conversion of 20% and a large compression ratio of 3.5, with inherently improved coherent and incoherent contrasts. This results in the generation of 37 μJ, 115 fs pulses at a repetition rate of 100 kHz with high temporal quality.     

Laser power noise detection at the quantum-noise limit of 32 A photocurrent

The power noise of a cw Nd:YAG laser system was measured at radio frequencies using the optical ac coupling technique. An additional mode cleaner in the setup allowed a high optical ac coupling amplification of 62.3. For the first time, to our knowledge, a sensitivity of 1.1×10?1? Hz(-1/2) relative power noise was achieved corresponding to an equivalent detected photocurrent of 32 A. High precision optics experiments can utilize this scheme to improve the sensitivity of their photodetectors.     

Dissociative and molecular oxygen chemisorption channels on reduced rutile TiO2(110): An STM and TPD study

High-resolution scanning tunneling microscopy (STM) and temperature-programmed desorption (TPD) were used to study the interaction of O₂ with reduced TiO₂(110)–(1 × 1) crystals. STM is the technique of choice to unravel the relation between vacancy and non-vacancy assisted O₂ dissociation channels as a function of temperature. It is revealed that the vacancy-assisted, first O₂ dissociation channel is preferred at low temperature (~ 120 K), whereas the non-vacancy assisted, second O₂ dissociation channel operates at temperatures higher than 150 K–180 K. Based on the STM results on the two dissociative O₂ interaction channels and the TPD data, a new comprehensive model of the O₂ chemisorption on reduced TiO₂(110) is proposed. The model explains the relations between the two dissociative and the molecular O₂ interaction channels. The experimental data are interpreted by considering the available charge in the near-surface region of reduced TiO₂(110) crystals, the kinetics of the two O₂ dissociation channels as well as the kinetics of the diffusion and reaction of Ti interstitials.     

White-light generation through Ce3+/Mn2+-codoped and Eu2+-doped Ba1.2Ca0.8SiO4 T-phase phosphors

Hexagonal Ba_1.20Ca_0.8?2x?ySiO₄:xCe³⁺,xLi⁺,yMn²⁺ phosphors exhibit two emission bands peaking near 400 and 600 nm from the allowed f–d transition of Ce³⁺ ions and the forbidden ⁴T₁–⁶A₁ transition of Mn²⁺ ions, respectively. The strong interaction between Ce³⁺/Mn²⁺ ions is investigated in terms of energy transfer, crystal field effect, and microstructure by varying their concentrations. They show a higher quenching temperature of 250 °C than that of a commercially used (Ba,Sr)₂SiO₄:Eu²⁺ phosphor (150 °C). Finally, mixtures of these phosphors with green-emissive Ba_1.20Ca_0.70SiO₄:0.10Eu²⁺ are tested and yielded correlated color temperatures from 3500 to 7000 K, and color rendering indices up to 95%.     

Effect of polymer surface activity on cavitation nuclei stability against dissolution

The persistence of acoustic cavitation in a pulsed wave ultrasound regime depends upon the ability of cavitation nuclei, i.e., bubbles, to survive the off time between pulses. Due to the dependence of bubble dissolution on surface tension, surface-active agents may affect the stability of bubbles against dissolution. In this study, measurements of bubble dissolution rates in solutions of the surface-active polymer poly(propyl acrylic acid) (PPAA) were conducted to test this premise. The surface activity of PPAA varies with solution pH and concentration of dissolved polymer molecules. The surface tension of PPAA solutions (55-72 dynes/cm) that associated with the polymer surface activity was measured using the Wilhelmy plate technique. Samples of these polymer solutions then were exposed to 1.1 MHz high intensity focused ultrasound, and the dissolution of bubbles created by inertial cavitation was monitored using an active cavitation detection scheme. Analysis of the pulse echo data demonstrated that bubble dissolution time was inversely proportional to the surface tension of the solution. Finally, comparison of the experimental results with dissolution times computed from the Epstein-Plesset equation suggests that the radii of residual bubbles from inertial cavitation increase as the surface tension decreases.     

Test by NMR of the phase coherence of electromagnetically induced transparency

Electromagnetically induced transparency is an effect observed in atomic systems, originating from quantum interference, in which electromagnetic transitions to and from a certain quantum state become suppressed. This dark state is also characterized by a quantum phase, relative to other states, which theoretically should stop evolving, but remain phase coherent, during transparency. We test this theoretical prediction using techniques developed for liquid-state nuclear magnetic resonance quantum computation, applied to a spin-7/2 nuclear spin system. A sequence of quantum operations is applied to create the dark state, and during transparency its phase evolution is measured relative to a reference state using Ramsey interferometry. Experimental measurements of the fringe visibility are in excellent agreement with theoretical expectations, taking into account measured decoherence rates.     

Staggered flux vortices and the superconducting transition in the layered cuprates

We propose an effective model for the superconducting transition in the high-T(c) cuprates motivated by the SU(2) gauge theory approach. In addition to variations of the superconducting phase we allow for local admixture of staggered flux order. This leads to an unbinding transition of vortices with a staggered flux core that are energetically preferable to conventional vortices. Based on parameter estimates for the two-dimensional t-J model we argue that the staggered flux vortices provide a way to understand a phase with a moderate density of mobile vortices over a large temperature range above T(c) that yet exhibits otherwise normal transport properties. This picture is consistent with the large Nernst signal observed in this region.     

Photothermal microanalysis of thermal discontinuities in metallic samples

Modeling the behavior of a protective coating during a thermal shock not only requires the knowledge of its own thermophysical characteristics, but also those of the coating–substrate discontinuity. According to its nature, this discontinuity can be modeled as a zero-thickness interface (thermal contact resistance) or a finite thickness layer (thermal third body). This paper presents an experimental device and two associated thermal transfer models developed in view of the microscale characterization of such discontinuities.