ALKALINE QUENCHING OF BACTERIORHODOPSIN TRYPTOPHANYL FLUORESCENCE: EVIDENCE FOR AQUEOUS ACCESSIBILITY OR A HYDROGEN-BONDED CHAIN

Abstract— Comparison between Trp fluorescence yields of membrane-bound bacteriorhodopsin (BR) and retinylidene-free bacterioopsin (BO) is consistent with a model in which all eight Trp residues are active fiuorophores in the latter, while the emission of all but two residues in the former is lost by energy transfer to retinal. The visible chromophore of BR is progressively bleached with increasing pH. Up to pH 12 this bleaching is reversed on reneutralization; but above this the change is irreversible with the appearance of a new absorption band characteristic of free retinal. Emission yields for both proteins decrease with increasingly alkaline pH in a manner typical of energy transfer to weakly-fluorescent tyrosinate. The limiting yields, reached at a pH corresponding to that producing irreversible bleaching of the visible chromophore, agree with an integral value of one remaining active Trp fluorophore in BR and between one and two in BO and show that the bulk of Trp are within the 11 Å Förster energy-transfer distance of Tyr accessible to OH⁻. Current models of the native protein structure of BR arrange the polypeptide chain primarily in a bundle of seven helical segments with axes perpendicular to the lipid bilayer plane and with buried polar residues, including Trp and Tyr, located at intrahelical surfaces. An interpretation of the observed accessibility of buried Tyr to OH⁻ is that an aqueous region exists within the protein structure. Moreover, this putative aqueous region must be close to the retinylidene chromophore and thus may be associated with the light-driven ion transport system. The results are also compatible with energy transfer to internal Tyr residues which are connected via a chain of phenolate hydrogen bonds to a surface Tyr.     

Electrochemical synthesis and characterization of conducting polymers in supercritical carbon dioxide

This contribution reports the first synthesis of conducting polymers (CPs), specifically, polyaniline (PAn) and polypyrrole (PPy), in supercritical carbon dioxide (scCO2). CPs synthesized electrochemically in scCO2 were characterized with cyclic voltammetry (CV), four-point probe conductivity, scanning electron microscopy (SEM), and UV-vis spectroscopy. Preliminary data indicate that CPs synthesized by this method exhibit novel morphology and high conductivity comparable to that synthesized by traditional methods.     

Enantioselective cyclization of racemic supramolecular polymers

Homochiral hydrogen-bonded cyclic assemblies are formed in dilute solutions of racemic supramolecular polymers based on the quadruple hydrogen bonding 2-ureido-4[1H]-pyrimidinone unit, as observed by 1H NMR and SEC experiments. Preorganization of the monomers and the combined binding strength of the eight hydrogen bonds result in a very high stability of the cyclic aggregates with pronounced selectivity between homochiral and heterochiral cyclic species, usually only observed in crystalline or liquid crystalline phases.     

Direct and simultaneous spectrofluorometric determination of naproxen and salicylate in human serum assisted by chemometric analysis

A direct method for the simultaneous determination of naproxen and salicylate in human serum is reported, based on a combination of spectrofluorometric measurements with two multivariate calibration techniques: partial least-squares (PLS-1) and the novel net analyte preprocessing (NAP). The method is rapid, selective and sensitive, and is based on the measurement of the fluorescence spectra of NH₃ alkalinized whole human sera at the excitation wavelength of 315 nm. It can be applied within the ranges of concentrations 50-200 ng ml⁻¹ for naproxen and 100-300 ng ml⁻¹ for salicylate. The employed chemometric techniques have been compared on the basis of the statistical indicators for calibration and validation. Reproducibility and interference studies in abnormal sera have also been carried out.     

Anatase TiO2 nanocomposites for antimicrobial coatings

A sol-gel chemistry approach was used to fabricate nanoparticles of TiO(2) in its anatase form. The particle size is shown to be sensitive to the use of HClO(4) or HNO(3) as acid catalyst. The gold-capped TiO(2) nanocomposites were processed by the reduction of gold on the surface of the TiO(2) nanoparticles via a chemical reduction or a photoreduction method. Different percentages of vanadium-doped TiO(2) nanoparticles, which extended the TiO(2) absorption wavelength from the ultraviolet to the visible region, were successfully prepared. The synthesized nanocomposites have a size of about 12-18 nm and an anatase phase as characterized by XRD, TEM, AFM, and UV-vis spectroscopy. The TiO(2) nanocomposite coatings have been applied on glass slide substrates. The antibacterial activity of TiO(2) nanocomposites was investigated qualitatively and quantitatively. Two types of bacteria, Escherichia coli (DH 5alpha) and Bacillus megaterium (QM B1551), were used during the experiments. Good inhibition results were observed and demonstrated visually. The quantitative examination of bacterial activity for E. coli was estimated by the survival ratio as calculated from the number of viable cells, which form colonies on the nutrient agar plates. The antimicrobial efficiency and inhibition mechanisms are illustrated and discussed.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

DOSE-RESPONSE OF CHRONIC ULTRAVIOLET EXPOSURE ON EPIDERMAL FORWARD SCATTERING-ABSORPTION IN SK-1 HAIRLESS MOUSE SKIN

This work provides a dose-response model of UV-induced epidermal-stratum corneum thickening induced by irradiation at wavelength lambda. This model assumes that photobiochemical reaction(s) can give rise to hyperplasia in a manner which is predictable from a simple photochemical kinetic scheme. In this work, we derive an equation which predicts an approximately linear relationship between the logarithm of the increase in optical skin thickening measured at 320 nm (delta OD320) and total cumulative dose (DT) seen by the target cells in or near the basal layer. For each excitation wavelength lambda, the slope R(lambda) of the log delta OD320 vs DT plot is proportional to epsilon(lambda) phi rx, where epsilon(lambda) is the extinction coefficient for the target chromophore at excitation wavelength, and phi rx is the quantum yield for the photochemical reaction(s) leading to hyperplasia. Our data previously obtained from irradiation of SK-1 hairless mice with "monochromatic" UV wavebands at 280, 290, 300, 307 and 313 nm (Menter et al., 1988, Photochem. Photobiol. 47, 225-260.) and data from Sterenborg and van der Leun at 254 and 313 nm (1988, Photodermatology 5, 71-82) are in good agreement with this model, except for 254 and 280 nm excitation, which are greatly attenuated by epidermis-stratum corneum. For excitation at the latter wavelengths, "dark" regressive processes successfully compete with the "light" reaction(s) which lead to (pre)cancerous lesion. This difficulty notwithstanding, the "intrinsic" action spectrum for hyperplasia derived from these measurements indicates that the target chromophore preferentially absorbs in the UV-C region.(ABSTRACT TRUNCATED AT 250 WORDS)     

Quantitative characterization of the global electrophilicity pattern of some reagents involved in 1,3-dipolar cycloaddition reactions

The global electrophilicity power, ω, of a series of dipoles and dipolarophiles commonly used in 1,3-dipolar cycloadditions may be conveniently classified within a unique relative scale. The effects of chemical substitution on the electrophilicity of molecules have been evaluated using a representative set of electron-withdrawing and electron-releasing groups for a series of dipoles including nitrone, nitrile oxide and azide derivatives. The absolute scale of electrophilicity is used to rationalize the chemical reactivity of these species as compared to the static reactivity pattern of the reagents involved in the Diels-Alder reactions.     

The C(2)1pi(u) state of Na2 molecule studied by polarization labelling spectroscopy method

The C1pi(u) <-- X1sigma(g)+ system of Na2 is studied by the polarization labelling spectroscopy technique. Accurate molecular constants are derived for the observed levels nu = 0-12, J = 12-100 in the C1pi(u) state.     

Characterisation of a wheat straw cell wall residue by various techniques: A comparative study with a synthetic and an extracted lignin

Comparative studies using various analytical and spectroscopic techniques have been carried out on three samples of lignin: two samples of natural lignin that have been extracted using different processes, and one sample of synthetic lignin. This paper discusses the general features common to all three kinds of lignin, as well as the differences between, on one hand, the two natural lignins coming from different extraction processes, and, on the other hand, the natural lignins and the synthetic one. The advantages of each technique in explaining the structure of these three different lignins are emphasised.