Determination of low-level residual ethylene oxide by using solid-phase microextraction and gas chromatography

Current methods of analysis for ethylene oxide (EO) in medical devices include headspace and simulated-use extractions followed by gas chromatography with either a packed or a capillary column. The quantitation limits are about 0.5-1.0 microg/g for a packed column and about 0.1-0.2 microg/g for a capillary column. The current allowable levels of EO on medical devices sterilized with EO gas as outlined in International Organization for Standardization (ISO) 10993-7 may be significantly reduced from current levels by applying the ISO Draft International Standard 10993-17 method for establishing allowable limits. This may require EO test methods with detection and quantitation limits that are much lower than those of the currently available methods. This paper describes a new method that was developed for the determination of low-level EO by solid-phase microextraction using the direct-immersion method. Factors such as temperature and stirring were found to affect absorption efficiency and absorption time. A low extraction temperature (about 6 degrees C) was found to be more efficient than room-temperature extraction. Stirring was found to reduce absorption time by about 50%. Under these conditions, detection and quantitation limits of 0.002 and 0.009 microg/g, respectively, were obtained by using a capillary column. As a result, this method makes compliance with lower EO limits feasible.     

DOSE-RESPONSE OF CHRONIC ULTRAVIOLET EXPOSURE ON EPIDERMAL FORWARD SCATTERING-ABSORPTION IN SK-1 HAIRLESS MOUSE SKIN

This work provides a dose-response model of UV-induced epidermal-stratum corneum thickening induced by irradiation at wavelength lambda. This model assumes that photobiochemical reaction(s) can give rise to hyperplasia in a manner which is predictable from a simple photochemical kinetic scheme. In this work, we derive an equation which predicts an approximately linear relationship between the logarithm of the increase in optical skin thickening measured at 320 nm (delta OD320) and total cumulative dose (DT) seen by the target cells in or near the basal layer. For each excitation wavelength lambda, the slope R(lambda) of the log delta OD320 vs DT plot is proportional to epsilon(lambda) phi rx, where epsilon(lambda) is the extinction coefficient for the target chromophore at excitation wavelength, and phi rx is the quantum yield for the photochemical reaction(s) leading to hyperplasia. Our data previously obtained from irradiation of SK-1 hairless mice with "monochromatic" UV wavebands at 280, 290, 300, 307 and 313 nm (Menter et al., 1988, Photochem. Photobiol. 47, 225-260.) and data from Sterenborg and van der Leun at 254 and 313 nm (1988, Photodermatology 5, 71-82) are in good agreement with this model, except for 254 and 280 nm excitation, which are greatly attenuated by epidermis-stratum corneum. For excitation at the latter wavelengths, "dark" regressive processes successfully compete with the "light" reaction(s) which lead to (pre)cancerous lesion. This difficulty notwithstanding, the "intrinsic" action spectrum for hyperplasia derived from these measurements indicates that the target chromophore preferentially absorbs in the UV-C region.(ABSTRACT TRUNCATED AT 250 WORDS)     

Quantitative characterization of the global electrophilicity pattern of some reagents involved in 1,3-dipolar cycloaddition reactions

The global electrophilicity power, ω, of a series of dipoles and dipolarophiles commonly used in 1,3-dipolar cycloadditions may be conveniently classified within a unique relative scale. The effects of chemical substitution on the electrophilicity of molecules have been evaluated using a representative set of electron-withdrawing and electron-releasing groups for a series of dipoles including nitrone, nitrile oxide and azide derivatives. The absolute scale of electrophilicity is used to rationalize the chemical reactivity of these species as compared to the static reactivity pattern of the reagents involved in the Diels-Alder reactions.     

Characterisation of a wheat straw cell wall residue by various techniques: A comparative study with a synthetic and an extracted lignin

Comparative studies using various analytical and spectroscopic techniques have been carried out on three samples of lignin: two samples of natural lignin that have been extracted using different processes, and one sample of synthetic lignin. This paper discusses the general features common to all three kinds of lignin, as well as the differences between, on one hand, the two natural lignins coming from different extraction processes, and, on the other hand, the natural lignins and the synthetic one. The advantages of each technique in explaining the structure of these three different lignins are emphasised.     

Observation and interpretation of HH coupling in 1H187Os satellite NMR spectra

The single hydride resonance observed for each of the compounds H₃Os₃(CO)₉CX (X = OMe, Br, H) has one set of ¹⁸⁷Os satellites which are further split into doublets by HH coupling. The implications of this observation for structural assignments based on ¹⁸⁷Os satellites are discussed.     

The modulation of face-face π-π interactions in Lewis acid catalysis

The enantiomeric excess observed for the exo-adduct from the Lewis acid catalysed Diels-Alder reaction between cyclopentadiene and methacrolein can be increased up to 21% by simple modification of the electronics of the aromatic ring in a series of stilbene-derived diol ligands, suggesting that the proposed face-face π-π interaction between the catalyst and the dienophile can be modulated by altering the electron density on the aromatic ring.     

Diamond and diamond-like carbon from a preceramic polymer

The synthesis of poly(hydridocarbyne), one of a class of carbon-based random network polymers and a structural isomer of polyacetlyene, is reported. The network backbone of this polymer is primarily composed of tetrahedrally hybridized carbon atoms, each bearing one hydride substituent and linked via three carbon-carbon single bonds into a three-dimensional random network of fused rings. This atomic-level carbon network backbone confers unusual properties on the polymer, including facile thermal decomposition to form diamond or diamond-like carbon high-quality films at atmospheric pressure, by direct deposition or by chemical vapor deposition (CVD), without the use of hydrogen or any other reagent.     

Elucidating the mode of action of a corrosion inhibitor for iron

Two polymetallic iron(III) complexes 1 and 2 have been synthesised from the known corrosion inhibitor 3-(4-methylbenzoyl)-propionic acid HL1 and their crystal structures determined. Coordination geometries extracted from these structures have been used as the basis for molecular modelling onto idealised iron(III) oxide surfaces as an aid to understanding the efficacy of inhibitors of the 4-keto acid type. The proposed mode of action involves 1,3-bridging didentate coordination of the carboxylate function of L1 to two FeIII ions, hydrogen-bond formation between the 4-keto group of L1 and a bridging surface hydroxy group, as well as close packing of the aromatic end groups, which should generate a hydrophobic barrier on the surface. Adsorption isotherm experiments have been used to compare the strengths of binding of related carboxylic acids onto iron(III) oxide surfaces and indicate that the presence of the 4-keto function leads to the formation of significantly more stable surface complexes.     

Synthesis of 2′,3′-dihydrosolanesyl analogues of β-d-arabinofuranosyl-1-monophosphoryldecaprenol with promising antimycobacterial activity

Two new hydrolytically stable analogues of β-d-arabinofuranosyl-1-monophosphoryldecaprenol, the donor substrate for mycobacterial arabinosyltransferase, have been prepared. Biological evaluation of these compounds in vitro against Mycobacterium tuberculosis H₃₇Rv strain revealed a promising activity.