Chiral separation of bupivacaine enantiomers by capillary electrophoresis partial-filling technique with human serum albumin as chiral selector

Capillary electrophoresis (CE) is a powerful technique for enantiomer separations due to its intrinsic high separation efficiencies, speed of analysis, low reagent consumption and small sample requirements. However, some chiral selectors present strong background UV absorption providing high detection limits. The present paper deals with the application of the partial-filling technique to the separation of bupivacaine enantiomers by capillary electrophoresis using human serum albumin (HSA) as chiral selector. In this procedure the cationic surfactant cetyltrimethylammonium bromide (CTAB) was used as a dinamic capillary coating in order to reduce the electro-osmotic flow and detect both bupivacaine enantiomers out of the chiral selector plug. Several experimental conditions such as CTAB concentration, pH, HSA concentration and plug length, background electrolyte concentration, temperature and voltage were studied. Under the selected conditions it is possible to detect the separated enantiomers out of the HSA plug in less than 4 min using 50 mM Tris pH 8 as background electrolyte with 50 microM CTAB, at 30 degrees C and using a separation voltage of 25 kV. The proposed methodology was then validated for analytical purposes and applied to the analysis of pharmaceutical preparations commercially available. The results obtained with the proposed methodology were in good agreement with those declared by the manufacturers. The simplicity, sample throughput, accuracy, reproducibility and low cost of the proposed method make it suitable for the control of the enantiomeric composition of bupivacaine in pharmaceuticals.     

Evaluation of hydrogen line emission and argon plasma electron concentrations resulting from the gaseous sample injection involved in hydride generation-ICP-atomic emission spectrometric analysis

The simultaneous injection of volatile hydride species and hydrogen gas, originating in reagent decomposition, was monitored during the operation of a continuous hydride generation manifold employed for the determination of trace arsenic by HG-ICP-AES. Line and background intensities as well as the FWHM of the hydrogen Hgamma and Hdelta lines were measured, and electron number densities (ne) estimated from Stark broadening of the line profiles. Results were compared with those obtained by conventional pneumatic injection of aqueous solutions. Overlapping with atomic nitrogen lines at 410 nm and 411 nm tends to distort the Hdelta line profile for the hydrogen-seeded plasma, rendering unreliable results. The N I lines seem to be quenched by the presence of water aerosol. More consistent results were obtained with the Hgamma line. When no solutions are pumped through the hydride generation manifold ("dry" plasma), the measured ne value was (1.57 +/- 0.22) x 10(15)cm(-3). Conversely, when the reducing reagent flow was replaced by pure water (corresponding to the injection of water vapor in equilibrium that is swept by the argon carrier gas passing through the phase separator), the electron concentration is 25% higher. In that case the ne value agrees between the experimental error with that obtained for a plasma in which a water aerosol is introduced at a flow rate of 1 mL/min. An enhancement of 52% relative is observed in ne when the system is operated under optimized conditions for arsine generation, employing sodium tetrahydroborate in acidic medium as reducing agent (i.e. hydrogen seeded plasma). It was also observed that the continuum emission near 410 nm for the hydrogen containing plasma correlates with the measured electron number density, suggesting that the background enhancement under hydride generation conditions may respond to the ion-electron recombination mechanism.     

Synthesis of tetrahydroimidazo[1,5-b]-β-carboline derivatives with complex basic substituents

Novel tetrahydroimidazo[1,5-b]-β-carbolines derivatives 6 bearing complex basic chains as substituents on the imidic nitrogen have been prepared in a one-pot reaction. This simple experimental procedure overcomes the direct handle of isocyanates which can be favorably generated “in situ” from carbonyldiimidazole (CDI) and different amines. The stereochemistry of the novel compounds was determined by nmr experiments.     

Excess molar volumes and excess viscosities for then-hexane+dichloromethane+tetrahydrofuran ternary system at 25°C

Exces molar volumes, and excess viscosities of then-hexane+dichloromethane+tetrahydrofuran system have been determined at 25°C by measuring densities and viscosities. Different expressions exist in the literature to predict these excess properties from binary data. The empirical correlation of Cibulka is shown to be the best in this system.     

The influence of the brewing process on the formation of biogenic amines in beers

Biogenic amines, as dabsyl derivatives, were determined in beer samples, intermediate products, and raw materials (malt and maize) by HPLC. A procedure for the extraction of the amines from malt and maize with diluted hydrochloric acid was optimised by combining a Response Surface Methodology with a Simultaneous Decision Making Approach. The results of the analysis indicate that, in brewing, technology and hygiene are the decisive factors that determine the amine concentrations in the final product.     

Synthesis and biological evaluation of spongistatin/altohyrtin analogues: E-ring dehydration and C46 side-chain truncation

Simplified analogues of the potent antimitotic marine macrolide spongistatin 1/altohyrtin A were synthesised and evaluated as growth inhibitory agents against a range of human tumour cell lines, including Taxol-resistant strains, revealing that E-ring dehydration leads to enhanced cytotoxicity at the low picomolar level while truncation of the side-chain at C46 results in a drastic decrease in activity.     

The use of liquid scintillation spectrometry for the determination of radionuclidic purity of 90Y from a radiochemical 90Y/90Srgenerator

Summary An extraction technique for the separation of ⁹⁰Sr from a high excess of⁹⁰Y has been developed. This procedure can be used for the determination of trace amounts of⁹⁰Sr in⁹⁰Y prepared by a radiochemical⁹⁰Y/⁹⁰Sr generator by liquid scintillation.     

Control of the Properties of Carbon Nanotubes Synthesized by CVD for Application in Electrochemical Biosensors

Interest in carbon nanotubes (CNT) has grown at a very rapid rate in the last decade. Their interesting physical and chemical properties open attractive possibilities in many application areas. These properties depend on the process conditions during synthesis and on subsequent purification steps. Recent studies have demonstrated that CNT can promote the electron transfer of biomolecules. These exceptional properties make them attractive for use in electrochemical biosensors. Multi walled nanotubes have been synthesized by the Chemical Vapor Deposition (CVD) method using methane as a carbon source and Ni–Al₂O₃–SiO₂ as the catalyst. The influence of the variation of certain reaction parameters such as feed gas composition, catalyst mass, temperature and reaction time in the yield of the CVD process has been established. In addition, the structural and chemical characteristics of the CNTs have been studied and a purification process to eliminate the catalyst and amorphous carbon has been developed that involves a gaseous oxidative process and acid treatment. The efficiency of the purification step has been determined by analytical techniques. Atomic force microscopy, Raman scattering, thermogravimetric analysis, inductively coupled plasma atomic spectroscopy are the characterization techniques employed in this work.     

Parallel and multiplexed bead-based assays and encoding strategies

Advances in high throughput screening (HTS), together with the rapid progress in combinatorial chemistry, genomic and proteomic sciences have dramatically stimulated the development of a variety tools to enable the drug discovery process to become more efficient. Major future challenges in HTS include obtaining high density and good quality data based on assays that are rapid, reliable, inexpensive, sensitive, simple and miniaturised. This paper reviews the development and role of bead-based assays for HTS including DNA and single nucleotide polymorphism (SNP) assays, particularly from a multiplex perspective and evaluating the recent advances in bead-based arrays. The encoding strategies that are commonly used in bead-based assays are highlighted, while the importance of magnetic beads in genomic and proteomic purifications is discussed. In conclusion, bead-based assays offer a powerful promising approach for many aspects of drug discovery.     

Determination of organochlorine pesticides by gas chromatography with solid-phase microextraction

Summary A study of different extraction techniques for the determination of a selected group of organochlorine compounds in surface waters is presented. Comparison of liquid-liquid extraction (LLE) with solid-phase extraction (SPE) and solid-phase microextraction (SPME) with fibers of different polarity shows that SPME with a recently commercialised fiber of polydimethylsiloxane divinylbenzene allows these compounds to be determined in surface waters with good extraction efficiencies. Extraction time, effect of temperature, ionic strength and pH were optimised, allowing quantification in agricultural effluents in the range 1.0–60 ng·L⁻¹.