Modulating the photophysical properties of azamacrocyclic europium complexes with charge-transfer antenna chromophores

Two europium complexes with bis(bipyridine) azamacrocyclic ligands featuring pendant arms with or without π-conjugated donor groups are synthesized and fully characterized by theoretical calculations and NMR spectroscopy. Their photophysical properties, including two-photon absorption, are investigated in water and in various organic solvents. The nonfunctionalized ligand gives highly water-stable europium complexes featuring bright luminescence properties but poor two-photon absorption cross sections. On the other hand, the europium complex with an extended conjugated antenna ligand presents a two-photon absorption cross section of 45 GM at 720 nm but is poorly luminescent in water. A detailed solvent-dependent photophysical study indicates that this luminescence quenching is not due to the direct coordination of O-H vibrators to the metal center but to the increase of nonradiative processes in a protic solvent induced by an internal isomerization equilibrium.     

Selective conversion of {Mo132} Keplerate ion into 4-electron reduced crown-capped Keggin derivative [Te5Mo15O57](8-). A key intermediate to single-phase M1 multielement MoVTeO light-alkanes oxidation catalyst

{Mo(132)} Keplerate anion reacts with tellurites to give a soluble precursor to produce in hydrothermal conditions single-phase M1 MoVTeO light-alkanes oxidation catalyst. Characterization of this Te-containing intermediate by single-crystal X-ray diffraction, (125)Te NMR, UV-visible and redox titration reveals a molybdotellurite anion as a crown-capped Keggin derivative.     

The excited state dipole moments of betaine pyridinium investigated by an innovative solvatochromic analysis and TDDFT calculations

This work reports on the solvatochromic properties of a simple heterocyclic betaine pyridinium, 2-(1-pyridinio)benzimidazolate (SBPa), having promising potentialities in non-linear optics. From advanced PCM-TDDFT calculations, the solvatochromism of SBPa was found to be unusual, involving two different electronic states for absorption (S(0)→ S(2)) and emission (S(1)→S'(0)). To account for this behavior, we developed an innovative physical treatment which consists in a non-linear fit of the solvatochromic data using the Bilot-Kawski theoretical model and visualizing the least-square coefficient χ(2) on a 2D map as a function of the solute polarizability and gas phase absorption energy. In parallel, Kamlet-Taft correlations were undertaken to select a propitious set of electrostatic solvents usable in this treatment. Protic solvents that lead to specific interactions and nonpolar solvents that favor dimerization processes were excluded. From a choice of aprotic solvents with sufficiently high polarity, 4 dipole moments μ(g)(S(0)) = +9.1 D, μ(e)(S(2)) = -1.5 D, μ(e)(S(1)) = 0 D and μ(g)(S'(0)) = +3.31 D were determined, the 3 former values being in close agreement with TDDFT values, although the solute polarizability values seem underestimated. Anyhow, disregarding this discrepancy, we evaluated the static hyperpolarizability to β(0) = -64 × 10(-30) esu from the solvatochromic data in close agreement with DFT calculations.     

Effect of alkyl chain length and hydroxyl group functionalization on the surface properties of imidazolium ionic liquids

Properties of the surface of ionic liquids, such as surface tension, ordering, and charge and density profiles, were studied using molecular simulation. Two types of modification in the molecular structure of imidazolium cations were studied: the length of the alkyl side chain and the presence of a polar hydroxyl group at the end of the side chain. Four ionic liquids were considered: 1-ethyl-3-methylimidazolium tetrafluoroborate, [C(2)C(1)im][BF(4)]; 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate, [C(2)OHC(1)im][BF(4)]; 1-octyl-3-methylimidazolium tetrafluoroborate, [C(8)C(1)im][BF(4)] and 1-(8-hydroxyoctyl)-3-methylimidazolium tetrafluoroborate, [C(8)OHC(1)im][BF(4)]. The surface tension was calculated using both mechanical and thermodynamic definitions, with consistent treatment of the long-range corrections. The simulations reproduce the available experimental values of surface tension with a maximum deviation of ±10%. This energetic characterization of the interface is completed by microscopic structural analysis of orientational ordering at the interface and density profiles along the direction normal to the interface. The presence of the hydroxyl group modifies the local structure at the interface, leading to a less organized liquid phase. The results allow us to relate the surface tension to the structural ordering at the liquid-vacuum interface.     

Adsorption of n-alkane vapours at the water surface

Monte Carlo simulations are reported here to predict the surface tension of the liquid-vapour interface of water upon adsorption of alkane vapours (methane to hexane). A decrease of the surface tension has been established from n-pentane. A correlation has been evidenced between the decrease of the surface tension and the absence of specific arrangement at the water surface for n-pentane and n-hexane. The thermodynamic stability of the adsorption layer and the absence of film for longer alkanes have been checked through the calculation of a potential of mean force. This complements the work recently published [Ghoufi et al., Phys. Chem. Chem. Phys., 2010, 12, 5203] concerning the adsorption of methane at the water surface. The decrease of the surface tension has been interpreted in terms of the degree of hydrogen bonding of water molecules at the liquid-vapour interface upon adsorption.     

An asymptotic non-linear model for thin-walled rods with strongly curved open cross-section

In this paper, we present a non-linear one-dimensional model for thin-walled rods with open strongly curved cross-section, obtained by asymptotic methods. A dimensional analysis of the non-linear three-dimensional equilibrium equations lets appear dimensionless numbers which reflect the geometry of the structure and the level of applied forces. For a given force level, the order of magnitude of the displacements and the corresponding one-dimensional model are deduced by asymptotic expansions.     

Mössbauer spectroscopic study of synthetic lipscombite and barbosalite at room temperature

Barbosalite and lipscombite hydroxyphosphates have been prepared and characterized by Mössbauer spectroscopy. These phases have been shown to be constituted of chains of Fe—oxygen octahedra sharing faces. The principal difference in the arrangement of the ions in these structures is the organization of the octahedra in the chains. In barbosalite, the chains are composed only of trimeric groups (Fe₃O₁₂) separated by a vacant octahedral site, while lipscombite chains are composed of groups of (2n + 1) iron cations,n varying from 0 to 5 or 6. The relative abundance of the different groups was calculated from published X-ray diffraction data and used to attribute the three ferric and the two ferrous doublets observed in the Mössbauer spectrum of lipscombite. This attribution is confirmed by the comparison with the results obtained on barbosalite.     

Adaptive mesh refinement for the control of cost and quality in finite element analysis

Adaptive strategies are a necessary tool to make finite element analysis applicable to engineering practice. In this paper, attention is restricted to mesh adaptivity. Traditionally, the most common mesh adaptive strategies for linear problems are used to reach a prescribed accuracy. This goal is best met with an h-adaptive scheme in combination with an error estimator. In an industrial context, the aim of the mechanical simulations in engineering design is not only to obtain greatest quality but more often a compromise between the desired quality and the computation cost (CPU time, storage, software, competence, human cost, computer used). In this paper, we propose the use of alternative mesh refinement criteria with an h-adaptive procedure for 3D elastic problems. The alternative mesh refinement criteria (MR) are based on: prescribed number of elements with maximum accuracy, prescribed CPU time with maximum accuracy and prescribed memory size with maximum accuracy. These adaptive strategies are based on a technique of error in constitutive relation (the process could be used with other error estimators) and an efficient adaptive technique which automatically takes into account the steep gradient areas. This work proposes a 3D method of adaptivity with the latest version of the INRIA automatic mesh generator GAMHIC3D.     

The synthesis of a pyrrole-functionalized cyclobis(paraquat-p-phenylene) derivative and its corresponding [2]rotaxane and [2]catenane and their subsequent deposition onto an electrode surface

We report the convenient synthesis of a pyrrole-functionalized tetracationic cyclophane, [2]rotaxane, and [2]catenane. X-ray crystallography has confirmed the interlocked structure of the catenane. We have investigated the solution properties of these systems using solution electrochemistry, NMR, and UV-vis spectroscopy. We have also demonstrated that it is possible to immobilize these systems onto a platinum working electrode surface. We have shown that films of the cyclophane have the ability to undergo complexation with a dialkyloxynaphthalene derivative.     

Synthesis of methacrylate derivatives oligomers by dithiobenzoate‐RAFT‐mediated polymerization

Reversible addition fragmentation chain transfer (RAFT) was used to synthesize methacrylic acid oligomers and oligo(methacrylic acid)‐b‐poly(methyl methacrylate) (PMAA‐b‐PMMA) with targeted degree of polymerization ≈ 10. Characterization is by size‐exclusion chromatography (SEC) and electrospray mass‐spectrometry. SEC data are presented as hydrodynamic volume distributions (HVDs), the only proper means to present comparative and meaningful SEC data when there is no unique relationship between size and molecular weight. The RAFT agent, (4‐cyanopentanoic acid)‐4‐dithiobenzoate (CPADB), produced dithiobenzoic acid as a side product during the polymerization of methacrylate derivatives. Precipitation in diethyl ether proved to be an easy way to remove this impurity from the PMAA‐RAFT oligomers. Both unpurified and purified macro‐RAFT agent were used to prepare amphiphilic PMAA‐b‐PMMA copolymers. Diblock copolymer prepared from the purified PMAA homopolymer had a narrower HVD in comparison to those obtained from the equivalent unpurified macro‐RAFT agent. This work shows that while cyanoisopropyl‐dithiobenzoate or CPADB are good RAFT agents for methacrylate derivatives, they exhibit some instability under typical polymerization conditions, and thus when oligomers are targeted, optimal control requires checking for the degradation product and appropriate purification steps when necessary (the same effect is present for larger polymers but is unimportant). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2277–2289, 2008