Oxygen transfer rate and pH as major operating parameters of citric acid production from glycerol by <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> W29 and CBS 2073

The amount of citric acid (CA) produced by Yarrowia lipolytica is dependent on the yeast strain and growth conditions such as pH, oxygen availability and medium composition. In this work, an experimental design based on the Taguchi method was applied to evaluate the effect of parameters: pH, carbon/nitrogen (C/N) ratio in the medium, oxygen mass transfer rate (OTR) and salts concentration, on the CA production by two Y. lipolytica strains, W29 (ATCC 20460) and CBS 2073. OTR and pH showed higher influence on the CA production for both strains. The increase of OTR from air to the culture medium led to a two- and three-fold improvement of the CA production by Y. lipolytica CBS 2073 and W29, respectively. Besides the individual effects of the parameters, a significant influence of the interaction between these parameters was observed, mainly between OTR and salts. Different values of the parameters were found at the optimum conditions for each strain, but the theoretically predicted and experimentally obtained citric acid concentrations (c_CA) were approximately 10 g L^?1 for both strains. The optimal conditions were also validated employing crude glycerol from biodiesel industry as a substrate, and similar behavior of the strains was observed.     

A Lamellar Coordination Polymer with Remarkable Catalytic Activity

A positively charged lamellar coordination polymer based on a flexible triphosphonic acid linker is reported. [Gd(H₄nmp)(H₂O)₂]Cl ? 2 H₂O ( 1 ) [H₆nmp=nitrilotris(methylenephosphonic acid)] was obtained by a one‐pot approach by using water as a green solvent and by forcing the inclusion of additional acid sites by employing HCl in the synthesis. Compound 1 acts as a versatile heterogeneous acid catalyst with outstanding activity in organic reactions such as alcoholysis of styrene oxide, acetalization of benzaldehyde and cyclohexanaldehyde and ketalization of cyclohexanone. For all reaction systems, very high conversions were reached (92–97 %) in only 15–30 min under mild conditions (35 °C, atmospheric pressure). The coordination polymer exhibits a protonic conductivity of 1.23×10^?5 S cm^?1 at 98 % relative humidity and 40 °C.     

Comparison between DAX-8 and C-18 solid phase extraction of rainwater dissolved organic matter

Rainwater is a very low concentrated matrix and, for dissolved organic matter (DOM) characterization, an efficient extraction procedure is essential. Isolation procedures based on the adsorption onto XAD-8 and C-18 sorbents have been used in the literature for rainwater DOM isolation, but a comparison between these procedures is lacking. In this work, UV-visible and molecular fluorescence spectroscopies highlighted differences between rainwater DOM isolated by DAX-8 (replacement for XAD-8) and by C-18. It was possible to recover higher rainwater DOM percentage by the C-18 based procedure than by the DAX-8 one. Rainwater protein-like compounds were better concentrated by the C-18 procedure than by the DAX-8 one, while humic-like compounds were similarly concentrated by both procedures. Furthermore, rainwater DOM extracted by the C-18 procedure was more representative of the global matrix, while DAX-8 preferentially extracted humic-like compounds.     

A chiral liquid chromatography method for the simultaneous determination of oxcarbazepine, eslicarbazepine, R-licarbazepine and other new chemical derivatives BIA 2-024, BIA 2-059 and BIA 2-265, in mouse plasma and brain

Recently, in silico models have been developed to predict drug pharmacokinetics. However, before application, they must be validated and, for that, information about structurally similar reference compounds is required. A chiral liquid chromatography method with ultraviolet detection (LC‐UV) was developed and validated for the simultaneous quantification of BIA 2–024, BIA 2–059, BIA 2–265, oxcarbazepine, eslicarbazepine (S‐licarbazepine) and R‐licarbazepine in mouse plasma and brain. Compounds were extracted by a selective solid‐phase extraction procedure and their chromatographic separation was achieved on a LiChroCART 250–4 ChiraDex column using a mobile phase of water–methanol (92:8, v/v) pumped at 0.7 mL/min. The UV detector was set at 235 nm. Calibration curves were linear (r² ≥ 0.996) over the concentration ranges of 0.2–30 µg/mL for oxcarbazepine, eslicarbazepine and R‐licarbazepine; 0.2–60 µg/mL for the remaining compounds in plasma; and 0.06–15 µg/mL for all the analytes in brain homogenate. Taking into account all analytes at these concentration ranges in both matrices, the overall precision did not exceed 9.09%, and the accuracy was within ±14.3%. This LC‐UV method is suitable for carrying out pharmacokinetic studies with these compounds in mouse in order to obtain a better picture of their metabolic pathways and biodistribution. Copyright © 2011 John Wiley & Sons, Ltd.     

Profit Optimization of Cattle Growth with Variable Prices

Methodology and Computing in Applied Probability - We apply a class of stochastic differential equations to model the growth of individual animals in randomly fluctuating environments using real...     

Loading of 5-aminosalicylic in solid lipid microparticles (SLM)

5-Aminosalicylic acid (5-ASA), the active moiety of sulphasalazine, is the most commonly used drug for treating patients with inflammatory bowel disease (IBD). Its bioavailability is low, i.e. 20–30% upon oral administration and 10–35% by rectal administration. As the extent of 5-ASA absorption is very much dependent on the time-length, the drug is retained in the colon, a way to increase drug retention is the use of orally administered sustained released formulations. Solid lipid microparticles (SLM) are a viable option for site-specific targeted delivery in compressed tablets produced by direct compaction. In this study, we describe the development and characterization of 5-ASA-loaded SLM for sustained release. The solubility of 5-ASA in different types of solid lipids (e.g. cetyl palmitate, cetyl alcohol, and cetearyl alcohol) was evaluated to select the best lipid as the inert matrix-forming agent to control the release of the drug. SLM dispersions were prepared using the hot emulsification method employing the selected solid lipid, lecithin (Lipoid^®) as surfactant, dimethyl sulphoxide, and acetone stabilized with Arlacel^®. The characterization was performed by differential scanning calorimetry, thermogravimetric analysis, wide-angle x-ray diffraction, Fourier transform infrared spectroscopy measurements, optical microscopy, and scanning electron microscopy. Results show that the best lipid for dissolving the 5-ASA was cetyl palmitate and that the melting process did not affect the chemical stability of the materials. The thermal analysis suggests that 5-ASA was successfully encapsulated with the microparticles, of spherical shape and uniform size distribution.

     

New Protocol Based on UHPLC-MS/MS for Quantitation of Metabolites in Xylose-Fermenting Yeasts

Xylose fermentation is a bottleneck in second-generation ethanol production. As such, a comprehensive understanding of xylose metabolism in naturally xylose-fermenting yeasts is essential for prospection and construction of recombinant yeast strains. The objective of the current study was to establish a reliable metabolomics protocol for quantification of key metabolites of xylose catabolism pathways in yeast, and to apply this protocol to Spathaspora arborariae. Ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) was used to quantify metabolites, and afterwards, sample preparation was optimized to examine yeast intracellular metabolites. S. arborariae was cultivated using xylose as a carbon source under aerobic and oxygen-limited conditions. Ion pair chromatography (IPC) and hydrophilic interaction liquid chromatography-tandem mass spectrometry (HILIC-MS/MS) were shown to efficiently quantify 14 and 5 metabolites, respectively, in a more rapid chromatographic protocol than previously described. Thirteen and eleven metabolites were quantified in S. arborariae under aerobic and oxygen-limited conditions, respectively. This targeted metabolomics protocol is shown here to quantify a total of 19 metabolites, including sugars, phosphates, coenzymes, monosaccharides, and alcohols, from xylose catabolism pathways (glycolysis, pentose phosphate pathway, and tricarboxylic acid cycle) in yeast. Furthermore, to our knowledge, this is the first time that intracellular metabolites have been quantified in S. arborariae after xylose consumption. The results indicated that fine control of oxygen levels during fermentation is necessary to optimize ethanol production by S. arborariae. The protocol presented here may be applied to other yeast species and could support yeast genetic engineering to improve second generation ethanol production.

Open image in new window

Graphical Abstract ?

     

Analysis of the main conjugated linoleic acid (CLA) precursors (C18:2 n-6 and C18:3 n-3) in Brachiaria ruzizienses by capillary zone electrophoresis

An alternative method for extraction optimization of C18:2 n-6 and C18:3 n-3, the main precursors for the synthesis of conjugated linoleic acid (CLA), in Brachiaria ruzizienses forages was proposed. Three methods of lipid extraction were tested: 1. Hara & Radin, 2. Micro Folch and 3. Bligh & Dyer. The preliminary test showed the Hara & Radin method as the most promising procedure. Then, a 3³ Box Behnken design with triplicate in the central point was applied in Hara & Radin method in order to optimize the extraction procedure. The optimization extraction was monitored by quantification of C18:2 n-6 and C18:3 n-3 through capillary zone electrophoresis (CZE). The results obtained by CZE were compared to gas chromatography (AOCS official method) in real samples using the paired t-test. No significant difference between methods was found within a 95% confidence interval (p-value= 0.937). The alternative CZE method for Brachiaria ruzizienses forages analysis has some advantages in comparison with official GC method such as, short analysis time (10 min), no derivatization step for sample preparation, absence of specific separation columns, lower analytical cost and high throughput.