Synthesis and application of a functionalized resin in on-line system for copper preconcentration and determination in foods by flame atomic absorption spectrometry

An on-line system for preconcentration and determination of copper at μg l⁻¹ level by flame atomic absorption spectrometry (FAAS) is proposed. Amberlite XAD-2 functionalized with 3,4-dihydroxybenzoic acid packed in a minicolumn was used as sorbent. Copper(II) ions were sorbed in the minicolumn, from which it could be eluted by hydrochloric acid solution directly to the nebulizer-burner system of the FAAS. Eluent solution was carried by water at a flow rate of 5.00 ml min⁻¹. Signals were measured as peak height by using an instrument software. Achieved sampling rate was 27 samples per hour. Analytical parameters were evaluated and the results demonstrated that copper can be determined, with acetate buffer to adjust the sample pH at 6.0, preconcentration time of 120 s and a sample flow rate of 6.50 ml min⁻¹. The desorption was carried out with 30 μl of a 1.0 mol l⁻¹ hydrochloric acid solution. An enrichment factor of 33 in 13.00 ml of sample (120 s preconcentration time) was achieved by using the time-based technique. The detection limit (DL) (3 s) was 0.27 μg l⁻¹ and the precision (assessed as the relative standard deviation) reached values of 5.7-1.1% in copper solutions of 5.00 to 50.00 μg l⁻¹ concentration, respectively. The accuracy of procedure was confirmed by copper determination in certified reference materials. Recoveries of spike additions (1.0 or 2.0 μg g⁻¹) to food samples were quantitative (90.0-110.0%). These results proved also that the procedure is not affected by matrix interference and can be applied satisfactorily for copper determination in rice flour and starch samples.     

Structural and spectral assignment of three forskolin-like diterpenoids isolated from Plectranthus ornatus

Three labdane diterpenoids were isolated from an acetone extract of Plectranthus ornatus. Their structures, closely related to that of forskolin, were determined by NMR studies. Unambiguous and complete assignments of the 1H and 13C NMR chemical shifts for these substances are presented. The assignments are based on 2D shift-correlated [1H, 1H-COSY, 1H, 13C-gHSQC-1J (C,H), 1H, 13C-gHMBC-(n)J (C,H) (n = 2 and 3)] and NOE experiments.     

Cytotoxic lignans from the stems of Styrax camporum (Styracaceae)

An ethanolic extract from the stems of Styrax camporum Pohl (Styracaceae), a plant traditionally used for gastrointestinal diseases, was fractionated and subjected to flash chromatography and afforded two benzofuran lignans, egonol and homoegonol, and one furofuran lignan, (+/-)syringaresinol, which were identified by spectral data interpretation. Their cytotoxic activities against Hep-2 (larynx epidermoid carcinoma), HeLa (human cervix carcinoma) and C6 (rat glioma) cell lines were evaluated using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) assay at several concentrations for 24h. Activities could be observed for egonol against C6 (IC50 = 3.2 microg/mL) and Hep-2 (IC50 = 3.6 microg/mL) cell lines, and for homoegonol against C6 (IC50 = 4.9 microg/mL) and HeLa (IC50 = 5.3 microg/mL) cells.     

Nucleophilic substitution at silicon (SN2@Si) via a central reaction barrier

It is textbook knowledge that nucleophilic substitution at carbon (SN2@C) proceeds via a central reaction barrier which disappears in the corresponding nucleophilic substitution reaction at silicon (SN2@Si). Here, we address the question why the central barrier disappears from SN2@C to SN2@Si despite the fact that these processes are isostructural and isoelectronic. To this end, we have explored and analyzed the potential energy surfaces (PES) of various Cl-+CR3Cl (R=H, CH3) and Cl-+SiR3Cl model reactions (R=H, CH3, C2H5, and OCH3). Our results show that the nature of the SN2 reaction barrier is in essence steric, but that it can be modulated by electronic factors. Thus, simply by increasing the steric demand of the substituents R around the silicon atom, the SN2@Si mechanism changes from its regular single-well PES (with a stable intermediate transition complex, TC), via a triple-well PES (with a pre- and a post-TS before and after the central TC), to a double-well PES (with a TS; R=OCH3), which is normally encountered for SN2@C reactions.     

Nucleophilicity and leaving-group ability in frontside and backside S(N)2 reactions

Nucleophilic substitution is ubiquitous in chemistry and well studied. Nucleophilicity and leaving-group ability have been related to various reactant properties, such as electronegativity, size, polarizability, and others. Yet, the state-of-the-art is to some extent still phenomenological. Here, we try to arrive at a straightforward, causal relationship between the reactants' electronic structure and their S(N)2 reactivity. To this end, we have explored the potential energy surfaces of the backside as well as frontside S(N)2 reactions of X(-) + CH3Y with X, Y = F, Cl, Br, and I, using relativistic density functional theory (DFT) at ZORA-OLYP/TZ2P. These explorations provide us with a consistent overview of trends, over a wide range of reactivities and pathways, which were analyzed using the activation strain model of chemical reactivity. A clear picture emerges from these analyses: nucleophilicity is determined by the electron-donor capability of the nucleophile (i.e., energy and shape of the X(-) np atomic orbital), and leaving-group ability derives directly from carbon-leaving group (C-Y) bond strength.     

External polyacrylate-coating as alternative material for preparation of photopolymerized sol-gel monolithic column

Photopolymerized sol-gel monolithic columns for use in capillary electrochromatography were prepared in 125 microm i.d. polyacrylate-coated fused-silica capillaries. The polyacrylate-coating, unlike the polyimide one, is transparent to the radiation used (approximately 370 nm), and thus, no coating removal is necessary. This is a very important particularity since intrinsic capillary column characteristics, such as flexibility and mechanical resistance, are unchanged. A mixture containing metacryloxypropyltrimethoxysilane (MPTMS) as the polymeric precursor, hydrochloric acid as the catalyst, toluene as the porogen and bis(2,4,6-trimethylbenzoyl)-phenylphosphine oxide (Irgacure 819) as the photoinitiator was irradiated at 370 nm for 20 min inside the capillaries to prepare the columns through sol-gel approach. The versatility and viability of the use of polyacrilate as a new capillary external coating were shown through preparation of two columns under different conditions, which were tested in electrochromatography for separation of standard mixture containing thiourea (marker compound), propylbenzene, phenanthrene and pyrene.     

Multivariate near infrared spectroscopy models for predicting the iodine value, CFPP, kinematic viscosity at 40 degrees C and density at 15 degrees C of biodiesel

Biodiesel is one of the main alternatives to fossil diesel. It is a non-toxic renewable resource, which leads to lower emissions of polluting gases. In fact, European governments are targeting the incorporation of 20% of biofuels in the fossil fuels until 2020.Chemically, biodiesel is a mixture of fatty acid methyl esters, derived from vegetable oils or animal fats, which is usually produced by a transesterification reaction, where the oils or fats react with an alcohol, in the presence of a catalyst. The European Standard (EN 14214) establishes 25 parameters that have to be analysed to certify biodiesel quality and the analytical methods that should be used to determine those properties.This work reports the use of near infrared (NIR) spectroscopy to determine some important biodiesel properties: the iodine value, the cold filter plugging point, the kinematic viscosity at 40 °C and the density at 15 °C. Principal component analysis was used to perform a qualitative analysis of the spectra and partial least squares regression to develop the calibration models between analytical and spectral data. The results support that NIR spectroscopy, in combination with multivariate calibration, is a promising technique applied to biodiesel quality control, in both laboratory and industrial-scale samples.     

The One-Sided Inverse Along an Element in Semigroups and Rings

The concept of the inverse along an element was introduced by Mary in 2011. Later, Zhu et al. introduced the one-sided inverse along an element. In this paper, we first give a new existence criterion for the one-sided inverse along a product and characterize the existence of Moore–Penrose inverse by means of one-sided invertibility of certain element in a ring. In addition, we show that \(a\in S^{\dagger }\bigcap S^{\#}\) if and only if \((a^{*}a)^{k}\) is invertible along a if and only if \((aa^{*})^{k}\) is invertible along a in a \(*\)-monoid S, where k is an arbitrary given positive integer. Finally, we prove that the inverse of a along \(aa^{*}\) coincides with the core inverse of a under the condition \(a\in S^{\{1,4\}}\) in a \(*\)-monoid S.     

Validation of a method for extraction of polycyclic aromatic hydrocarbons from sewage sludge and analysis by GC-MS

In the present study, the solid–liquid extraction with low temperature purification was validated for the determination of 16 polycyclic aromatic hydrocarbons from sewage sludge by gas chromatography-mass spectrometry. Recoveries ranged 70–114% for naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene and chrysene, while the compounds benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[g,h,i]perylene showed recoveries of between 40 and 70%. The relative standard deviation was less than 13% for all of the compounds. Negative matrix effect was observed on the 10 compounds with less retention time in the chromatographic analysis and positive matrix effect noticed on the others. The limits of quantification were from 2 to 20 μg kg^?1, about 30 times less than the maximum residue limit allowed in sludge by the European Union. The validated method produced quantification of 11 PAHs in one sludge sample at concentrations ranging 20–2000 μg kg^?1.     

Rheological behavior of poly(methyl methacrylate)/polystyrene (PMMA/PS) blends with the addition of PMMA-<Emphasis Type="BoldItalic">ran</Emphasis>-PS

In this work, the dynamic behavior of poly(methyl methacrylate)/polystyrene blend to which P(S_0.5-ran-MMA_0.5) was added was studied. Several blend (ranging from 5 to 20 wt% of dispersed phase) and copolymer (up to 20 wt% with respect to dispersed phase) concentrations were studied. The rheological behavior of the blends was compared to Bousmina’s (Rheol Acta 38:73–83, 1999) and Palierne’s (Rheol Acta 29:204–214, 1990) generalized models. The relaxation spectra of the blends were also inferred, and the results were analyzed in light of the analysis of Jacobs et al. [J Rheol 43:1495–1509, 1999]. The relaxation spectra of the blends with smaller dispersed phase (below 10 wt%) and larger copolymer concentrations (above 0.4 wt%) showed the presence of four relaxation times, two corresponding to the blend phases, τ _F , corresponding to the relaxation of the shape of the dispersed phase of the blend and that can be attributed to the relaxation of Marangoni stresses tangential to the interface between the dispersed phase and matrix. The experimental values of and were used to infer the interfacial tension (Γ) and the interfacial complex shear modulus (β) for the different blends, Γ decreased with increasing copolymer concentration. β decreased with increasing blend dispersed phase concentration and decreasing copolymer concentration. The predictions of Palierne’s generalized model were found to corroborate the experimental data once the values of Γ and β, found analyzing the relaxation spectra, were used in the calculations. Bousmina’s model was found to corroborate the data only for larger dispersed phase concentration. Paper was presented at the 3rd Annual Rheology Conference, AERC 2006, April 27–29, 2006, Crete, Greece.