Selective adsorption of metronidazole on conjugated microporous polymers

Conjugated microporous polymers (CMPs) have recently received extensive attention in oil/organic solvent-water separation field as a kind of ideal porous absorbents with tunable porosity, large surface areas, and super-hydrophobicity. However, reports on the application of CMPs in adsorption of hydrophilic contaminants from water are very few. In this work, we studied the adsorption of metronidazole (MNZ), a polar antibiotic, by two kinds of CMPs. The adsorption characteristics of MNZ by the CMPs, including adsorption kinetics, mechanism, and isotherm parameters were calculated. The adsorption kinetics of MNZ was well expressed by the pseudo-second-order model, and the adsorption process was found to be mainly controlled by film diffusion. The adsorption isotherm data agreed well with the Langmuir isotherm model, and the values of free energy E indicated that the adsorption nature of MNZ on the CMPs was physisorption. Increasing dispersion degree of the CMPs in MNZ solution resulted in greater adsorption. This work may provide fundamental guidance for the removal of antibiotics by CMPs.     

High-internal-phase-emulsion polymeric monolith coupled with liquid chromatography–electrospray tandem mass spectrometry for enrichment and sensitive detection of trace cytokinins in plant samples

High-internal-phase-emulsion polymers (polyHIPEs) show great promise as solid-phase-extraction (SPE) materials because of the tremendous porosity and highly interconnected framework afforded by the high-internal-phase-emulsion (HIPE) technique. In this work, polyHIPE monolithic columns as novel SPE materials were prepared and applied to trace enrichment of cytokinins (CKs) from complex plant samples. The polyHIPE monoliths were synthesized via the in-situ polymerization of the continuous phase of a HIPE containing styrene (STY) and divinylbenzene (DVB) in a stainless column, and revealed highly efficient and selective enrichment ability for aromatic compounds. Under the optimized experimental conditions, a method using a monolithic polyHIPE column combined with liquid chromatography–electrospray tandem mass spectrometry (LC–MS–MS) was developed for the simultaneous extraction and sensitive determination of trans-zeatin (tZ), meta-topolin (mT), kinetin (K), and kinetin riboside (KR). The proposed method had good linearity, with correlation coefficients (R ²) from 0.9957 to 0.9984, and low detection limits (LODs, S/N?=?3) in the range 2.4–47 pg mL^?1 for the four CKs. The method was successfully applied to the determination of CKs in real plant samples, and obtained good recoveries ranging from 68.8 % to 103.0 % and relative standard deviations (RSDs) lower than 16 %.     

Evaluation of the effect of silicon on the carbonization process of Colombian semi-anthracites

The environmental impacts associated with the exploitation and transformation of fossil resources aggravate the planet's situation in terms of climate change. Due to this, this paper studies an alternative use of mineral coal as a precursor to obtaining new materials with different properties to the starting coals. The thermal degradation of two Colombian semi-anthracites is analyzed through the thermogravimetry (TG) technique coupled to a Fourier transform infrared spectroscopy (FTIR) equipment from room temperature (25 °C) to 900 °C, at a heating rate of 10 K min^?1 in an inert atmosphere. The catalytic effect of the addition of silicon to these samples before being subjected to a carbonization process is evaluated during this process. The results indicated that the primary reaction occurs in the temperature range between 400 and 680 °C, where the highest mass loss rate was observed. At the end of the heating process, the TG profile of the samples with silicon addition showed losses between 14.33 and 18.82% in mass, these values being slightly higher compared to the starting and demineralized samples. The release of water, light gases such as CO₂, CH₄, and species such as toluene, phenol and formic acid was identified in most of the samples. The presence of silica seems to favor the release of all these species, being more evident in one of the semi-anthracites studied. According to the results obtained, it is proved that the presence of silicon in samples subjected to carbonization processes has a catalytic effect that improves some characteristics of the new materials obtained, thus contributing to the use of carbon to get new materials.

     

Preparation and characterization of microcapsules loaded with polyphenols-enriched Uncaria tomentosa extract using spray-dryer technique

Journal of Thermal Analysis and Calorimetry - This work prepared and characterized microcapsule of Uncaria tomentosa (UT) in order to standardize a spray-dryer Uncaria tomentosa extract. The UT...     

Local Structure Analysis and Modelling of Lignin-Based Carbon Composites through the Hierarchical Decomposition of the Radial Distribution Function

Carbonized lignin has been proposed as a sustainable and domestic source of activated, amorphous, graphitic, and nanostructured carbon for many industrial applications as the structure can be tuned through processing conditions. However, the inherent variability of lignin and its complex physicochemical structure resulting from feedstock and pulping selection make the Process-Structure-Property-Performance (PSPP) relationships hard to define. In this work, radial distribution functions (RDFs) from synchrotron X-ray and neutron scattering of lignin-based carbon composites (LBCCs) are investigated using the Hierarchical Decomposition of the Radial Distribution Function (HDRDF) modelling method to characterize the local atomic environment and develop quantitative PSPP relationships. PSPP relationships for LBCCs defined by this work include crystallite size dependence on lignin feedstock as well as increasing crystalline volume fraction, nanoscale composite density, and crystallite size with increasing reduction temperature.     

Stability of AgIII towards Halides in Organosilver(III) Complexes

The involvement of silver in two-electron Ag^I/Ag^III processes is currently emerging. However, the range of stability of the required and uncommon Ag^III species is virtually unknown. Here, the stability of Ag^III towards the whole set of halide ligands in the organosilver(III) complex frame [(CF₃)₃AgX]⁻ (X=F, Cl, Br, I, At) is theoretically analyzed. The results obtained depend on a single factor: the nature of X. Even the softest and least electronegative halides (I and At) are found to form reasonably stable Ag^III−X bonds. Our estimates were confirmed by experiment. The whole series of nonradiative halide complexes [PPh₄][(CF₃)₃AgX] (X=F, Cl, Br, I) has been experimentally prepared and all its constituents have been isolated in pure form. The pseudohalides [PPh₄][(CF₃)₃AgCN] and [PPh₄][(CF₃)₃Ag(N₃)] have also been isolated, the latter being the first silver(III) azido complex. Except for the iodo compound, all the crystal and molecular structures have been established by single-crystal X-ray diffraction methods. The decomposition paths of the [(CF₃)₃AgX]⁻ entities at the unimolecular level have been examined in the gas phase by multistage mass spectrometry (MSⁿ). The experimental detection of the two series of mixed complexes [CF₃AgX]⁻ and [FAgX]⁻ arising from the corresponding parent species [(CF₃)₃AgX]⁻ demonstrate that the Ag−X bond is particularly robust. Our experimental observations are rationalized with the aid of theoretical methods. Smooth variation with the electronegativity of X is also observed in the thermolyses of bulk samples. The thermal stability in the solid state gradually decreases from X=F (145 °C, dec.) to X=I (78 °C, dec.) The experimentally established compatibility of Ag^III with the heaviest halides is of particular relevance to silver-mediated or silver-catalyzed processes.     

Improving stability and thermal properties of TiO2-based nanofluids for concentrating solar energy using two methods of preparation

Journal of Thermal Analysis and Calorimetry - Nanofluids are considered a promising alternative to the classic fluids used in heat transfer processes. One interesting application of nanofluids is...     

Calorimetric (DSC) and dielectric (TSDC) investigation on the thermal behavior and molecular mobility in the supercooled liquid and glassy states of bifonazole and lamotrigine

Journal of Thermal Analysis and Calorimetry - The thermal behavior of the two glass-forming drugs bifonazole and lamotrigine was studied by differential scanning calorimetry (DSC); we reported a...     

The X<Superscript>−</Superscript>···benzohydrazide complexes: the interplay between anion-π and H-bond interactions

The compounds containing the benzohydrazide (BH) nucleus have a variety of biological activities because of various noncovalent intermolecular interactions. The interplay between anion-π and H-bond interactions, which can affect the activity of compounds, has been investigated in ten substituted BH exposed to the chloride ion using the quantum mechanical calculations. The total interaction energy is separated into the anion-π (ΔE _Aπ) and H-bond (ΔE _HB) contributions where both interactions are presented in the complexes. The electron-withdrawing substituents (EWSs) increase |ΔE _Aπ| and decrease |ΔE _HB|, while reversed changes are observed with the electron-donating substituents (EDSs). In addition, the total binding energy (ΔE) becomes more/less negative in the presence of EWSs/EDSs. The synergetic effects of mentioned interactions and substituent effects have also been investigated using the atoms in molecules (AIM), natural bond orbital (NBO) and molecular electrostatic potential (MEP) analyses. A good correlation is found between the energy data and the Hammett constants, the minimum of electrostatic potential (V _min) and the results of population analyses.     

DFT studies on the acid-catalyzed Curtius reaction: the Schmidt reaction

The Schmidt reaction is the acid-catalyzed analogue of the Curtius reaction and is extensively used in organic synthesis. In this work, the mechanism of this reaction has been explored using DFT calculations at the B3LYP/6-311+G(d,p) level. Protonated formyl azide may undergo rearrangement to the product, protonated isocyanic acid, with simultaneous extrusion of molecular nitrogen (concerted mechanism), or undergo rearrangement to the anti conformer, followed by removal of nitrogen to form the nitrenium ion, which then rearranges to the final product, protonated isocyanic acid (step-wise mechanism). Like the Curtius reaction, it is found that the concerted pathway is definitely preferred. The key role of acidification in decreasing the overall energy barrier is more highlighted in case of phenyl substitution, with negligible effect on the lower homologues. For methoxy and amine substituents, there is very little difference in the activation energies of the concerted and step-wise reactions, with the former being still slightly preferred. Unlike the parent compound, the rearrangement of substituted nitrenium ion in some cases involves side reactions like C-H insertion and cyclization.