Dense amorphous packing of binary hard sphere mixtures with chemical order: The stability of a solute ordered approximant

Recently, Miracle proposed that the intermediate structure in metallic glasses could be usefully characterized as an ordered face centered cubic packing of solute-centered coordination clusters. In this paper we examine the stability of such solute ordered arrangements in binary hard sphere mixtures subject to density maximization through local particle moves.     

Fluorine incorporation in silica glass by the MCVD process: Study of fluorine incorporation zone,evaluation of optical properties and structure of the glass

A theoretical approach was made to find out a complete fluorine incorporation zone on a ternary diagram which serves as a useful graphical representation to select the flows of the supplied reagents for incorporation of the suitable amount of fluorine into cladding glass of optical fiber preform made by the MCVD process using CCl₂F₂ as a source of fluorine under oxygen abundance, oxygen deficiency and intermediate oxygen state conditions. The possible mechanism for incorporation of fluorine into cladding glass of optical fiber is also evaluated on the basis of the thermodynamical data. The fluorine incorporation mechanism in silica glass by the MCVD process is found to be dependent on the CCl₂F₂/SiCl₄ ratio in the input gas mixture. Fluorine doping is found to be effective for removing the strained Si–O–Si bonds, which govern the optical transparency in deep ultra-violet (DUV) and vacuum ultra-violet (VUV) regions. The maximum refractive index depression of ?0.5 × 10^?3 is obtained with incorporation of fluorine into silica cladding glass by the MCVD process using CCl₂F₂ as a dopant precursor with suitable flow of SiCl₄ vapor along with O₂ through backward deposition pass. The structure of fluorine doped silica glass preform samples containing 1.70–1.79 mol% fluorine incorporated by the MCVD process based on the analyses of ¹⁹F MAS spectra done by high-resolution ¹⁹F NMR spectroscopy reveal the presence of two distinct types of fluorine environments. The majority of the fluorine environments are formed in SiO_1.5F polyhedral and less abundant species is observed to be highly unusual, yielding a fivefold coordinated silicon of the type SiO₂F polyhedral which become increased with increasing the fluorine content.     

Study on Inhibitors of Methionine Synthase Ⅷ: Synthesis of 2,5-Diamino-4-oxo-6- (3-butenyl) pyrimidine

Cobalamin-dependent methionine synthase plays a crucial role in folate metabolism and such would appear to be an excellent target for rational antifolate drug design. However, to date, no anticancer agents directed at this enzyme are available, but the enzyme is efficiently and specifically inhibited by N2O and this has proven invaluable for evaluating the biochemical consequence of enzyme inhibition and for mechanistic studies. [1,2] 2,5-Diamino-4-oxo-6-(3-butenyl) pyrimidine, a key intermediate in synthetic inhibitors of methionine synthase, was first synthesized using γbutenyl-β-ketoester and guanidine carbonate (Scheme 1). [3]     

Does an all-sulphur analogue of heptamolybdate exist?

The complexes [MoX₄]²⁻ (M = Mo; X = O or S) exist as the monomeric tetrahedral species in aqueous alkaline solutions. Acidification of tetraoxomolybdate results in the condensation of the tetrahedral units via a series of polyoxomolybdates leading to the ultimate formation of the trioxide MoO₃. Heptamolybdate [Mo₇O₂₄]⁶⁻ is the first major polyanion of the acidification reaction. In contrast, acidification of tetrathiomolybdates leads to the formation of amorphous molybdenum trisulphide via a dinuclear Mo(V) complex. The formation of the dinuclear Mo(V) complex precludes the formation of any higher nuclearity Mo(VI)-S complexes in aqueous solution. Thus it is shown that the all-sulphur analogue of heptamolybdate [M0₇S₂₄]⁶⁻ does not exist in alkaline medium and also cannot be isolated from aqueous acidic medium     

Scaling impacted structures

Summary The problem of non-scalability of structures under impact loads caused by strain-rate effects is solved in this article by properly correcting the impact velocity. The technique relies on the use of an alternative dimensionless basis, together with a mathematical model which allows the calculation of a correction factor for the impact velocity. This new velocity, when applied to the model, makes it to assure the satisfaction of the scaling laws. The indirect similitude method detailed here is applied to two strain-rate sensitive structures, a double plate under in-plane impact and a beam subjected to a blast load. The results show a very good agreement so that the model and a prototype made from strain rate sensitive materials behave the same.accepted for publication 3 March 2004     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

The response of thermally and optically stimulated luminescence from Al2O3:C to high-energy heavy charged particles

The thermoluminescence (TL) and optically stimulated luminescence (OSL) response of Al₂O₃ dosimeters to high-energy heavy charged particles (HCP) has been studied using the heavy ion medical accelarator at Chiba, Japan. The samples were Al₂O₃ single-crystal chips, of the type usually known as TLD-500, and Luxel^TM dosimeters (Al₂O₃:C powder in plastic) from Landauer Inc. The samples were exposed to ⁴He (150 MeV/u), ¹²C (400 MeV/u), ²⁸Si (490 MeV/u) and ⁵⁶Fe (500 MeV/u) ions, with linear energy transfer values covering the range from 2.26 to 189 keV/μm in water and doses from 1 to 100 mGy (to water). A ⁹⁰Sr/⁹⁰Y beta source, calibrated against a ⁶⁰Co secondary standard, was used for calibration purposes. For OSL, we used both continuous-wave OSL measurements (CW-OSL, using green light stimulation at 525 nm) and pulsed OSL measurements (POSL, using 532 nm stimulation from a Nd:YAG Q-switched laser). The efficiencies (η_HCP,γ) of the different HCPs at producing OSL or TL were observed to depend not only upon the linear energy transfer (LET) of the HCP, but also upon the sample type (single crystal chip or Luxel^TM) and the luminescence method used to define the signal—i.e. TL, CW-OSL initial intensity, CW-OSL total area, or POSL. Observed changes in shape of the decay curve lead to potential methods for extracting LET information of unknown radiation fields. A discussion of the results is given, including the potential use of OSL from Al₂O₃ in the areas of space radiation dosimetry and radiation oncology.