Efficiency assessment of wastewater treatment plant based on SPMD sampling

The efficiency of treatment processes forboth municipal and industrial wastewater (treatment plant-Ostrava, Czech Republic) focused on persistent organic pollutants (POPs) was assessed. Semipermeable membrane devices (SPMDs) as a sampling system were applied. Exposed SPMDs were analyzed both for chemical contaminants of POPs and toxicity response. The chemical analyses of PAHs were made by HPLC-FLD, PCDD/Fs and PCBs were analysed by GC/MS/MS on GCQ or PolarisQ (Thermoquest). Ecotoxicity data on chlorococcal alga Desmodesmus subspicatus (Scenedesmus subspicatus) and luminescent bacteria Vibrio fischeri are presented here. All toxicity data as effective volume Vtox are expressed. The results show good treatment ability of the treatment plant and proved used system as an appropriate tool for efficiency assessment of treatment and/or decontamination processes.     

Halonickel(I) complexes

Summary The reduction of nickel(II) halides with NaBH₄ in the presence of different ligands, L=PPh₃, AsPh₃, SbPh₃, has been studied. With a molar ratio L/Ni=3, new complexes NiX(SbPh₃)₃, X=Cl, Br, I, were obtained. With a molar ratio L/Ni=2, dimeric species [NiXL₂]₂, X=Cl, Br, I; L=PPh₃, AsPh₃, SbPh₃, were isolated. They are unstable and decompose easily in the solid and rapidly in solution, so that pure samples were only identified for X=Cl, L=PPh₃, AsPh₃, SbPh₃; X=Br, L=PPh₃ and X=I, L=PPh₃. With a molar ratio L/Ni=1, complexes [NiXL]_n (probably polymeric) were obtained. They are very unstable and pure samples could only be isolated when X=Cl, L=PPh₃. Impure substances containing variable amounts of decomposition products were obtained in all the remaining cases. The chemical and structural behaviour of these complexes is discussed.     

New synthetic approach to substituted isoindolo[2,1-a]quinoline carboxylic acids via intramolecular Diels-Alder reaction of 4-(N-furyl-2)-4-arylaminobutenes-1 with maleic anhydride

Acylation of substituted 4-(furyl-2)-4-arylaminobut-1-enes with maleic anhydride provided 2-allyl-6-carboxy-4-oxo-3-aza-10-oxatricyclo[5.2.1.0^1,5]dec-8-enes in high yield under mild reaction conditions. The Diels-Alder adducts are formed via an initial amide formation followed by a stereoselective intramolecular [4+2] exo-cycloaddition reaction. Treatment of the tricyclic compounds with phosphoric acid at high temperatures (70-120 °C) promoted cyclic ether opening, intramolecular cyclization and aromatization to give the corresponding tetracyclic compounds, 5,6,6a,11-tetrahydro-10-carboxyisoindolo[2,1-a]quinolines, in moderate yields. The influence of the acid and the reaction temperature on the cyclization reactions are also discussed.     

Electron capture dissociation of polypeptides using a 3 Tesla Fourier transform ion cyclotron resonance mass spectrometer

Electron capture dissociation (ECD) of polypeptides has been demonstrated using a commercially available 3 Tesla Fourier transform ion cyclotron resonance (FTICR) instrument. A conventional rhenium filament, designed for high-energy electron impact ionisation, was used to effect ECD of substance P, bee venom melittin and bovine insulin, oxidised B chain. A retarding field analysis of the effective electron kinetic energy distribution entering the ICR cell suggests that one of the most important parameters governing ECD for this particular instrument is the need to employ low trapping plate voltages. This is shown to maximise the abundance of low-energy electrons. The demonstration of ECD at this relatively low magnetic field strength could offer the prospect of more routine ECD analysis for the wider research community, given the reduced cost of such magnets and (at least theoretically) the greater ease of electron/ion cloud overlap at lower field.     

Finite-size scaling for Potts models

Recently, Borgs and Kotecký developed a rigorous theory of finite-size effects near first-order phase transitions. Here we apply this theory to the ferromagneticq-state Potts model, which (forq large andd2) undergoes a first-order phase transition as the inverse temperature is varied. We prove a formula for the internal energy in a periodic cube of side lengthL which describes the rounding of the infinite-volume jumpE in terms of a hyperbolic tangent, and show that the position of the maximum of the specific heat is shifted by _m (L)=(Inq/E)L ^–d +O(L ^–2d ) with respect to the infinite-volume transition point _t . We also propose an alternative definition of the finite-volume transition temperature _t (L) which might be useful for numerical calculations because it differs only by exponentially small corrections from _t .     

Suppression of deleterious effects of free silanols in liquid chromatography by imidazolium tetrafluoroborate ionic liquids

Silica-based stationary phases are commonly used in liquid chromatography, but their surface acidity causes known problems, especially when separating basic compounds. Deleterious effects of free silanols are not fully removed by standard prevention procedures consisting in adding alkylamines or other amino quenchers to the eluents. We found that ionic liquids of the imidazolium tetrafluoroborate class, added to mobile phases at concentrations of 0.5-1.5% (v/v), blocked silanols and provided excellent thin-layer chromatographic separations of strongly basic drugs which were otherwise not eluted, even with neat acetonitrile as the mobile phase. The silanol suppressing potency of imidazolium tetrafluoroborates was demonstrated to markedly exceed that of the standard mobile phase additives, like triethylamine, dimethyloctylamine and ammonia. The proposed new mobile phase additives were also demonstrated to provide reliable lipophilicity parameters of base drug analytes as determined by gradient mode of high-performance liquid chromatography. By applying the readily available and environmentally friendly imidazolium tetrafluoroborate ionic liquids, simple and efficient means of improvement of liquid chromatographic analysis of organic bases were elaborated.     

A detailed resonance Raman spectrum of Nickel(II)-substituted Pseudomonas aeruginosa azurin

Nickel(II) and cobalt(II) derivatives of the blue copper protein Pseudomonas aeruginosa azurin have been studied by resonance Raman (RR) spectroscopy at liquid-nitrogen temperatures. Vibrational assignments for the observed RR bands of Ni(II)-azurin have been made through a study of (62)Ni-substituted azurin. A comparison of Ni(II)-azurin RR spectra with those of the wild type (Cu-containing) protein showed Ni(II)-S(Cys) stretching vibrations, nu(Ni-S)(Cys), at substantially lower frequencies (approximately 360 versus approximately 400 cm(-1), respectively), indicating that the Ni(II)-S(Cys) bond is much weaker than the corresponding Cu(II)-S(Cys) bond. Resonance enhanced predominantly nu(Ni-N)(His) modes indicate that the metal-N(His) bond distances in the Ni(II) derivative are the same as those in native azurin. The vibrational data also confirm a tetrahedral disposition of ligands about the metal in Ni(II)-azurin found in the protein crystallographic structures. As expected, excitation profile measurements on Ni(II)-azurin show that the nu(Ni-S)(Cys) assignable modes give maxima at the 440-nm absorption band, which confirms a S(Cys) --> Ni(II) charge-transfer origin of the 440-nm electronic transition in Ni(II)-substituted azurin.     

Stochastic detection of motor protein-RNA complexes by single-channel current recording.

A label- and immobilization-free approach to detecting the reversible formation of complexes between nucleic acids and proteins at the single-molecule level is described. The voltage-driven translocation of individual oligoribonucleotides through a nanoscale protein pore is observed by single-channel current recordings. The oligoribonucleotide 5'-C25A(25)-3' gives rise to current blockades with an average duration of approximately 0.5 ms. In the presence of the RNA-binding ATPase P4, a viral packaging motor from bacteriophage phi8, longer events of tens to hundreds of milliseconds are observed. Upon addition of ATP the long events disappear, indicating the dissociation of the P4RNA complex. The frequency of events also depends on the concentration of P4 and the length of the oligoribonucleotide, thereby confirming the specificity of the P4RNA events. This study shows that single-channel current recordings can be used to monitor RNA-protein complex formation, thus opening up a new means to examine the motor activity of RNA- or DNA-processing enzymes.     

Chemical Bonding and Pressure‐Induced Change of the Electron Configuration of Ytterbium in β‐YbAgGa2

Single‐phase polycrystalline samples of the intermetallic compound β‐YbAgGa₂ were synthesized by inductive heating and subsequent annealing for eight weeks at 670 K. Magnetic properties were characterized by susceptibility measurements and indicated intermediate valence of ytterbium at ambient pressure. Angle‐dispersive X‐ray powder diffraction data of orthorhombic β‐YbAgGa₂ indicate stability of the phase in the investigated pressure range from 0.1 MPa (ambient pressure) to 19 GPa. The pressure‐induced volume decrease is accompanied by an increase of the effective valence from 2.17 at ambient conditions to 2.71 at 16 GPa as evaluated by X‐ray absorption spectroscopy at the Yb L_III threshold. Analysis of the chemical bonding in β‐YbAgGa₂ by integrating the electron density of the polyanion in basins as defined by the electron localization function results in an electron count Yb^2.7+[(Ag^0.2—)(Ga1(3b)^1.0—)(Ga2(4b)^1.5—)]. This finding is close to the expected values calculated by means of the Zintl rules and fits well the results of magnetic susceptibility measurements and XAS investigations.     

Theoretical DFT and experimental Raman and NMR studies on thiophene, 3-methylthiophene and selenophene

The results of extended MO calculations using density functional theory (DFT) approximation supported by experimental Raman, ¹H and ¹³C NMR studies on thiophene are reported. Raman spectra of liquid thiophene were re-examined and the performance of a hybrid B3PW91 density functional was compared with the ab initio restricted Hartree–Fock (RHF) method. With the basis sets of the 6-311++G^** quality, the DFT calculated bond lengths, dipole moments and harmonic vibrations were predicted in a very good agreement with available experimental data.

Additionally, the results on thiophene were extended by calculations on 3-methylthiophene and selenophene. In this case, a significant change in geometry and charge distribution in thiophene ring due to a methyl group substituent or replacement of sulphur by selene atom was observed.

A linear correlation between the predicted harmonic vibrational frequencies (scaled using SQM method) and experimental ones for thiophene, selenophene and 3-methylthiophene was shown. The theoretically calculated spectra have satisfactorily reproduced the available experimental spectra for thiophene and selenophene.