Isothermal crystallization of concentrated amorphous starch systems measured by modulated differential scanning calorimetry

The slow isothermal crystallization of concentrated amorphous starch systems is measured by Modulated Differential Scanning Calorimetry (MDSC). It can be followed continuously by the evolution (stepwise decrease) of the MDSC heat capacity signal (Cp), as confirmed with data from X-ray diffractometry, Dynamic Mechanical Analysis, Raman spectroscopy, and conventional Differential Scanning Calorimetry. Isothermal MDSC measurements enable a systematic study of the slow crystallization process of a concentrated starch system, such as a pregelatinized waxy corn starch with 24 wt % water and 76 wt % starch. After isothermal crystallization, a broad melting endotherm with a bimodal distribution is observed, starting about 10°C beyond the crystallization temperature. The bulk glass transition temperature (T_g) decreases about 15°C during crystallization. The isothermal crystallization rate goes through a maximum as a function of crystallization time. The maximum rate is characterized by the time at the local extreme in the derivative of Cp (t_max), or by the time to reach half the decrease in Cp (t_1/2). Both t_max and t_1/2 show a bell-shaped curve as a function of crystallization temperature. The temperature of maximum crystallization rate, for the system studied, lies as high as 75°C. This is approximately 65°C above the initial value of T_g. Normalized Cp curves indicate the temperature dependence of the starch crystallization mechanism. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2881–2892, 1999     

Tris­[(R)‐lact­amide‐κ2O,O′]­zinc(II) tetra­bromo­zincate

The title compound, tris­[(R)‐2‐hydroxy­propan­amide‐κ²O,O′]­zinc(II) tetra­bromo­zincate, [Zn(C₃H₇NO₂)₃][ZnBr₄], contains one monomeric six‐coordinate zinc complex cation and one tetrahedral [ZnBr₄]²⁻ anion. Both Zn^II atoms lie on threefold axes. Coordination in the cation occurs via the amide and hydroxy O atoms [Zn—O = 2.074 (5) and 2.073 (6) Å] and has a distorted octahedral geometry, with cis‐O—Zn—O angles in the range 76.2 (2)–109.2 (2)°. In the crystal structure, the cations and anions are linked by N—H⋯Br and O—H⋯O hydrogen bonds, generating a three‐dimensional network.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

Monoclonal antibody based electrochemical immunosensor for the determination of ochratoxin A in wheat

Competitive electrochemical enzyme-linked immunosorbent assays based on disposable screen-printed electrodes have been developed for quantitative determination of ochratoxin A (OTA). The assays were carried out using monoclonal antibodies in the direct and indirect format. OTA working range, I₅₀ and detection limits were 0.05-2.5 and 0.1-7.5 μg L⁻¹, 0.35 (±0.04) μg L⁻¹ and 0.9 (±0.1) μg L⁻¹, 60 and 100 μg L⁻¹ in the direct and indirect assay format, respectively. The immunosensor in the direct format was selected for the determination of OTA in wheat. Samples were extracted with aqueous acetonitrile and the extract analyzed directly by the assay without clean-up. The I₅₀ in real samples was 0.2 μg L⁻¹ corresponding to 1.6 μg/kg in the wheat sample with a detection limit of 0.4 μg/kg (calculated as blank signal −3σ). Within- and between-assay variability were less than 5 and 10%, respectively. A good correlation (r = 0.9992) was found by comparative analysis of naturally contaminated wheat samples using this assay and an HPLC/immunoaffinity clean-up method based on the AOAC Official Method 2000.03 for the determination of OTA in barley.     

Commissioning of a multi‐beamline femtoslicing facility at SOLEIL

The investigation of ultrafast dynamics, taking place on the few to sub‐picosecond time scale, is today a very active research area pursued in a variety of scientific domains. With the recent advent of X‐ray free‐electron lasers (XFELs), providing very intense X‐ray pulses of duration as short as a few femtoseconds, this research field has gained further momentum. As a consequence, the demand for access strongly exceeds the capacity of the very few XFEL facilities existing worldwide. This situation motivates the development of alternative sub‐picosecond pulsed X‐ray sources among which femtoslicing facilities at synchrotron radiation storage rings are standing out due to their tunability over an extended photon energy range and their high stability. Following the success of the femtoslicing installations at ALS, BESSY‐II, SLS and UVSOR, SOLEIL decided to implement a femtoslicing facility. Several challenges were faced, including operation at the highest electron beam energy ever, and achievement of slice separation exclusively with the natural dispersion function of the storage ring. SOLEIL's setup also enables, for the first time, delivering sub‐picosecond pulses simultaneously to several beamlines. This last feature enlarges the experimental capabilities of the facility, which covers the soft and hard X‐ray photon energy range. In this paper, the commissioning of this original femtoslicing facility is reported. Furthermore, it is shown that the slicing‐induced THz signal can be used to derive a quantitative estimate for the degree of energy exchange between the femtosecond infrared laser pulse and the circulating electron bunch.     

Introduction of Primary Amino Groups on Poly(ethylene terephthalate) Surfaces by Ammonia and a Mix of Nitrogen and Hydrogen Plasma

With the aim of introducing primary amino groups on the surface of poly(ethylene terephthalate) (PET), two methods were compared—the use of ammonia or a combination of nitrogen and hydrogen low-pressure microwave plasma. Several plasma parameters were optimized on the reactor to increase the –NH₂ surface density, which was estimated by colorimetric titration and X-ray photoelectron spectroscopy (XPS). These techniques show that whatever the plasma treatment, almost 2 –NH₂/nm2 are incorporated on PET films. Emission spectroscopy highlighted a correlation between the density of primary amino groups and the ratio between an NH peak intensity and an Ar peak intensity (I_NH/I_Ar). Variation in surface hydrophilicity with aging in air after plasma treatment was monitored with contact angle measurements and showed a hydrophobic recovery. This was confirmed by XPS, which suggests also that surfaces treated by NH₃ plasma are more stable than surfaces treated by N₂/H₂.     

A general route for the stereoselective synthesis of (E)-(1-propenyl)phenyl esters by catalytic CC bond isomerization

A general and efficient procedure for the stereoselective synthesis of (E)-(1-propenyl)phenyl esters from readily accessible allylphenols has been developed. The process involves a two-step sequence consisting of the initial acylation of the allylphenols with an acid chloride, followed by catalytic CC bond isomerization in the resulting allylphenyl esters. The latter step was performed in methanol at 80 °C using catalytic amounts (0.5 mol %) of the commercially available bis(allyl)-ruthenium(IV) dimer [{RuCl(μ-Cl)(η³:η³-C₁₀H₁₆)}₂] (C₁₀H₁₆=2,7-dimethylocta-2,6-diene-1,8-diyl). Reactions proceeded in high yields (68–93%) and short times (4–9 h) with complete E-selectivity.     

The newsvendor’s optimal incentive contracts for multiple advertisers

We consider a newsvendor who earns a revenue from the sales of her product to end users as well as from multiple advertisers paying to obtain access to those end users. We study the optimal decisions of a price-taking and a price-setting newsvendor when the advertisers have private information about their willingness to pay. We focus on the impact of the number of advertisers on the newsvendor’s optimal decisions. We find that regardless of the number of advertisers, the newsvendor may exclude advertisers with a low willingness to pay and distort the price and inventory from their system-efficient levels to screen the advertisers. Moreover, the newsvendor’s decision to exclude an advertiser is based exclusively on that advertiser’s characteristics, and the newsvendor’s optimal decision thus reveals independence among the advertisers. Nonetheless, the profits of the newsvendor and the advertisers also display network effects as both increase in the number of advertisers. Finally, our numerical results show that the newsvendor prefers an equivalent single advertiser to multiple advertisers due to the pooling effect.