Identification by Electron Probe Microbeam Analysis of Submicron Borides in Joints of Nickel Base Superalloys

The phases formed at the interface between an intermetallic (NiAl) and a nickel base superalloy joined by combustion synthesis were investigated, particularly the eutectic phases. Owing to their small size, the characterisation of these phases using a Castaings electron microprobe encounters difficulties. The analysis volume size is generally too large to differentiate the phases from their surrounding matrix, even by using low accelerating voltage. Moreover, the eutectic phases contain boron, which is difficult to characterise by EPMA. Independently of the phases shape, the characterisation can be solved by viewing this complex system as a surrounding matrix and a multi layer system. The results of these simulations revealed the presence of two categories of borides: the eutectic boride MM₂B₂ (M=Mo and M=Co, Cr) and the solid solution boride [Cr_1–x (Mo, W)_x]B.     

Receding contact angle in the situation of complete wetting: Experimental check of a model used for evaporating droplets

This paper provides experimental checks of assumptions needed in a model describing the moving contact line of a wetting droplet evaporating in an inert atmosphere. Special interest is given to the maximum extension of the droplet, when the contact line starts receding. The predicted power law dependence between the values of the radius R₀ and the contact angle Θ₀ at the maximum extension is checked against experiments. We find fairly good agreement with theory for very small droplets. However, discrepancies show up rapidly when the droplet size increases.     

Multiresidue method for simultaneous determination of ten quinolone antibacterial residues in multimatrix/multispecies animal tissues by liquid chromatography with fluorescence detection: single laboratory validation study

Quinolone antibacterials are veterinary drugs authorized for use in food animal production. The analysis of residual amounts of drugs in food from animal origin is important for quality control of products for consumers. For this purpose, Maximum Residue Limits (MRLs) have been set up by a European Union Council Regulation on Veterinary Drug Residues (No. 90/2377/EEC and subsequent), and 8 quinolones received MRLs at concentration levels depending on both the matrix and the animal species of interest. A method was developed for screening and confirming 10 quinolone residues (ciprofloxacin, danofloxacin, difloxacin, enrofloxacin, flumequine, marbofloxacin, nalidixic acid, norfloxacin, oxolinic acid, sarafloxacin) in a wide variety of matrixes of different animal species. It involves extraction of the residues from the biological tissues/fluids by acidic aqueous solution, centrifugation and filtration prior to injection on a C18 narrow-bore column, and detection through a 3-step-mode fluorescence detector. The method was validated during a 2-week study for a set of 8 species-matrixes (i.e., bovine raw milk, bovine muscle, porcine muscle, porcine kidney, porcine liver, fish flesh and skin, poultry muscle, whole egg). Residues were quantified down to 15 microg/kg with limits of detection and quantitation ranging from 4 to 11 and 13 to 36 microg/kg, respectively, which are sufficient compared to the wide range of MRLs set for these substances (from 30 microg/kg for danofloxacin in milk to 1900 microg/kg for difloxacin in poultry liver). The limit of performance of the method in terms of CCalpha and CCbeta, the critical concentrations stated in the Decision No. 2002/657/EC and the ISO Standard No. 11843, has been calculated for the authorized (MRL) substances but only estimated in the case of the nonauthorized (non-MRL) substances.     

Electroorganic synthesis. Reductive alkylation of functionalized 1,2-dithiole-3-thiones

Two-electron reduction of some substituted 1,2-dithiole-3-thiones 1 followed by alkylation of the dianionic intermediates leads through electrosynthesis to mixture of Z and E isomers of the corresponding substituted alkyl-(3-thioalkyl)-2-propenedithioates 2, 3 in satisfactory yield. The structure of those products was established by ¹³C and ¹H nmr and mass spectroscopy. The isomers ratios were determined by nmr spectroscopy.     

Synthesis of 8-vinyladenosine 5′-di- and 5′-triphosphate: evaluation of the diphosphate compound on ribonucleotide reductase

The synthesis of 5′-di- and 5′-triphosphate of 8-vinyladenosine to be tested on ribonucleotide reductases requires the modification of known methods. The phosphate group was introduced by treatment with an in situ generated chlorophosphite. Protection of the 2′,3′ diol with acetyl groups suppressed depurination during acid removal of the phosphotriester protecting groups. The di- and triphosphate compounds were obtained by treatment of the activated adenylic acid with phosphate or pyrophosphate anions followed by removal of the acetate protecting groups. Preliminary studies were conducted on Escherichia coli ribonucleotide reductase and have shown that the diphosphate compound is efficiently reduced.     

Unexpected conversion of a polycyclic thiophene to a macrocyclic anhydride

Oxygenation of 2,5,9,12-tetra(tert-butyl)diacenaphtho[1,2-b:1′,2′-d]-thiophene (1, C₄₀H₄₄S) by peracids gave the cyclic sulfonic ester 4 (2,7,10,13-tetra(tert-butyl)diacenaphtho[1,2-c:1′,2′-e]oxathiin 5,5-dioxide, C₄₀H₄₄O₃S) which, when heated in nitrobenzene, is converted into a complex, macrocyclic anhydride 3 (C₈₀H₈₈O₃), which is derived from two molecules of 4. Further investigation found a likely intermediate in this reaction, 4,4′,7,7′-tetra(tert-butyl)-1,1′-biacenaphthylenylidene-2,2′-dione (5, C₄₀H₄₄O₂), apparently formed from 4 by additional oxidation. Anhydride 3 plausibly arises by Diels-Alder reaction of 4 and 5 followed by several ring fragmentations. The structures of 3, 4, and 5 were unambiguously established by X-ray crystallography.     

First anhydrous gold perchlorato complex: ClO(2)Au(ClO(4))(4). Synthesis and molecular and crystal structure analysis

Chlorine trioxide, Cl(2)O(6), reacts with Au metal, AuCl(3), or HAuCl(4).nH(2)O to yield the well-defined chloryl salt, ClO(2)Au(ClO(4))(4). The crystal and molecular structure of ClO(2)Au(ClO(4))(4) was solved by a Rietveld analysis of powder X-ray diffraction data. The salt crystallizes in a monoclinic cell, space group C2/c, with cell parameters a = 15.074(5), b = 5.2944(2), and c = 22.2020(2) A and beta = 128.325(2) degrees. The structure displays discrete ClO(2)(+) ions lying in channels formed by Au(ClO(4))(4)(-) stacks. Au is located in a distorted square planar environment: Au-O = 1.87 and 2.06 A. [ClO(4)] groups are monodentate with ClO(b) = 1.53 and ClO(t) = 1.39 A (mean distances; O(b), oxygen bonded to Au; O(t), free terminal oxygen). A full vibrational study of the Au(ClO(4))(4)(-) anion is supported by DFT calculations.     

Synthesis of sydnonimine derivatives as potential trypanocidal agents

N‐(p‐Nitrophenoxy)carbonyl‐3‐morpholino‐sydnonimine (NCMS) has been prepared from 3‐morpholinosydnonimine hydrochloride. Using the Griess assay and the superoxide‐mediated reduction of ferricytochrome c, the nitric oxide (NO?) and superoxide anion (O₂?^‐) ‐ releasing properties in phosphate buffer pH 7.4 of this novel peroxynitrite donor was studied and compared with the known 3‐morpholino‐sydnonimine (SIN‐1). From compound NCMS, a series of N‐substituted sydnonimine derivatives were easily prepared that contain purine or melaminophenyl groups which specify a recognition by a trypanosomal purine transporter. The ability of these new sydnonimines to inhibit the uptake of [2³H]adenosine on Trypanosoma equiperdum was studied.     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.