A new look at XRD patterns of archaeological ceramic bodies

In this paper, the general rules of phase transformations in calcareous clay bodies during firing were used to estimate the equivalent firing temperature (EFT) of seventeenth century polychrome Persian haft rang tiles based on their X-ray diffraction (XRD) patterns. The novelty of this work is, however, that it handles the XRD patterns of archaeological clay bodies with principal component analysis (PCA) in order to have a new look at their firing and thermal behaviour. Statistically handling the XRD patterns, different clusters were discriminated in the clay bodies whose mineralogical composition showed various proportions of amorphous and quartz contents. The results showed interesting trends in the different clusters in terms of the EFT, quartz content and the density of the bodies. The present work uses PCA to have a new look at XRD patterns of archaeological clay bodies and, moreover, to interpret the PCA results in order to estimate the EFT of a large number of archaeological clay bodies.     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Adsorptive Stripping Voltammetric Determination of Nanomolar Concentration of Cerium(III) at a Carbon Paste Electrode Modified by N′‐[(2‐Hydroxyphenyl)Methylidene]‐2‐Furohydrazide

The aim of this work was to obtain an adsorptive stripping voltammetric method for the Ce(III) determination at a carbon paste electrode, chemically modified with N'‐[(2‐hydroxyphenyl)methylidene]‐2‐furohydrazide (NHMF). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/NHMF complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (5.0–90 nmol dm^?3). The detection limit was found to be 0.8 nmol dm^?3 on the basis of a signal to noise ratio of 3. The precision for six determinations of 10 and 55 nmol dm^?3 Ce(III) was 5.6% and 2.1% (relative standard deviation), respectively. Application of the procedure to the determination of cerium in phosphate rock and wastewater samples gave good results.     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Sm3+ Potentiometric Membrane Sensor as a Probe for Determination of Some Pharmaceutics

The increase use of ion sensors in the fields of environmental, agricultural, and medical analysis is stimulating analytical chemists to develop new sensors for fast, accurate, reproducible, and selective determination of various ions. In this study a new samarium membrane sensor was constructed and for the first time, it was applied as a probe in indirect determination of hyoscine, homatropine, and tramadol drugs in their pharmaceutical formulation. The proposed membrane sensor was constructed based on a membrane containing 2% sodium tetraphenyl borate (NaTPB) as an anionic additive, 63% dibutyl phthalate (DBP) as solvent mediator, 5% ionophore, and 30% poly(vinyl chloride) (PVC). The proposed Sm(III) electrode exhibits a Nernstian response of 19.35±0.2 mV per decade of samarium concentration, and has a lower detection limit of 1.0×10^?7 M. The linear range of the sensors was 1.0×10^?7–1.0×10^?1 M. It works well in the pH range of 3.0–8.0.     

DNA biosensors based on metallo-intercalator probes and electrocatalytic amplification

Strategies for electrochemical sensing of DNA can be classified into label-free and label-based approaches, categories of which include enzyme-, nanomaterial- and redox labels that are attached to DNA either by covalent or non-covalent means. Metallointercalators represent one group of small molecule redox labels that non-covalently enter the groove of a DNA. The metallointercalator plays a dual-role in acting as a structure indicator (for hybridization) and a signal generator. Labeling is not needed, and electrochemical measurements can be carried out in a label-free solution of an electrolyte. However, such metallointercalators lack the option of catalytic signal generation as in the case of enzyme- and nanomaterial-based labels. Therefore, signal amplification becomes crucial. We first survey here recent progress in this area. A signal-amplifying system is presented that relies on the electroatalytic oxidation of a metallointercalator ruthenium(II)bipyridine/phenoxazine complex in the presence of electron donor species such as oxalate, DNA bases, or tripropylamine. Recent work on such DNA sensors is discussed. Results suggest that such metallointercalator-based DNA sensors represent a viable platform for developing high-throughput and automated PCR/lab-on-a-chip devices as well as visualized multifunctional DNA sensors.

Note on some s-shaped bifurcation curves

In this article we consider asymptotic behavior of some bifurcation curves of the two-point boundary value problem -u′ (x) =λf(u(x)) for 0 < x < 1; u(0) = u(1) = 0. Infact we prove that λ grows linearly with respective to p(p = u(1/2)) for p large     

Experimental and quantum chemical study on the IR, UV and electrode potential of 6-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-2,3-dihydroxybenzaldehyde

Electrode potential of 6-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-2,3-dihydroxybenzaldehyde (DPDB) in methanol have been calculated theoretically. For the achievement of this task, the density functional theory (B3LYP/6-31G(d)) was employed with the inclusion of the entropic and thermochemical corrections to yield the free energies of the redox reactions. The electrode potential was also obtained experimentally by means of an electrochemical technique (cyclic voltammetry). The geometric parameters, the vibrational frequency values and the UV spectrum of DPDB and 2-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-5,6-dioxocyclohexa-1,3-dienecarbaldehyde (DPDD is the oxidized form of DPDB), were computed using the same methods. The calculated IR spectrum of DPDB, used for the assignment of the IR frequencies, was observed in the experimental FT-IR spectrum. The correlation between the theoretical and experimental DPDB vibrational frequencies was 0.996. This agreement mutually verified the accuracy of the experimental method and the validity of the applied mathematical model.