On groups acting by cohomogeneity one on the euclidean space ℝ<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript>

The paper studies closed Lie subgroups G ⊂ Iso(ℝ ⁿ ) acting by cohomogeneity one on ℝ ⁿ and prove that when there is no singular orbit, then there is a simply connected, solvable and closed Lie subgroup F ⊂ G which acts by cohomogeneity one on ℝ ⁿ and the two actions are orbit equivalent.     

Synthesis,Characterization and X‐ray Crystal Structure of a Chromium(III) Complex Obtained from a Proton‐Transfer Compound Containing 1,10‐Phenanthroline‐2,9‐dicarboxylic Acid and 2,6‐Pyridinediamine

The novel 1,10‐phenanthroline‐2,9‐dicarboxylate containing Chromium(III) complex, (pydaH)[Cr(phendc)₂] · 5H₂O, was synthesized using proton‐transfer compound LH₂, (pydaH₂)²⁺(phendc)^2?, (pyda: 2,6‐pyridinediamine; phendcH₂: 1,10‐phenanthroline‐2,9‐dicarboxylic acid) and thoroughly characterized by elemental analysis, IR spectroscopy, X‐ray crystallography and cyclic voltammetry. The complex crystallizes in the monoclinic space group P2₁/n with four formula units in the unit cell. The unit cell dimensions are: a = 13.962(3) Å, b = 14.529(3) Å, c = 16.381(3) Å and β = 106.691(4)°. In this complex, 1,10‐phenanthroline‐2,9‐dicarboxylate acts as a tridentate ligand and the lattice is composed of anionic hexacoordinated complex, [Cr(phendc)₂]^?, 2,6‐pyridiniumdiamine counter ion, (pydaH)⁺, and five lattice water molecules. Crystallographic characterization revealed that the resulting supramolecular structure is strongly stabilized by complicated network of hydrogen bonds between the crystallization water molecules, counter ion and both coordinated and uncoordinated carboxylate groups. There is no relevant π‐π interaction for this anionic complex between pyda or phendc moieties. The electrochemical studies indicated over potential for both the cathodic and anodic peaks of the complex with respect to the free Cr³⁺ ion, as a consequence of the energy requirement for rearrangement of the ligand at electrode surface.     

SYNTHESIS AND CONFORMATIONAL ANALYSIS OF 16H-DINAPHTHO AND 12 H-DIBENZO [D,G][1,3,2]DIOXASILOCINE

Abstract

The conformation of the heterocyclic eight-membered ring in 16H-dinaphtho and 12H-dibenzo [d,g][1,3,2]dioxasilocine was investigated in solution by ¹H NMR spectroscopy. The barrier to ring inversion in the 16H-dinaphtho compound 3a was found to be 8.6±0.2 Kcal/mol and for the 12 H-dibenzo compound 4a, 8±0.2 Kcal/mol. Molecular mechanics calculations show three energy minima conformations for both compounds, boat chair(BC), twist boat(TB) and twist boat boat(TBB). Twist boat form is estimated to be the global minimum for the dibenzo compounds while TBB is the global conformation of the dinaphtho compounds. The result of molecular mechanics calculations are supported by analysis of the ¹H-NMR spectra.     

Stochastic modeling of atomizing spray in a complex swirl injector using large eddy simulation

Large-eddy simulation of an atomizing spray issuing from a gas-turbine injector is performed. The filtered Navier–Stokes equations with dynamic subgrid scale model are solved on unstructured grids to compute the swirling turbulent flow through complex passages of the injector. The collocated grid, incompressible flow algorithm on arbitrary shaped unstructured grids developed by Mahesh et al. (J. Comp. Phys. 197 (2004) 215–240) is used in this work. A Lagrangian point-particle formulation with a stochastic model for droplet breakup is used for the liquid phase. Following Kolmogorov’s concept of viewing solid particle-breakup as a discrete random process, the droplet breakup is considered in the framework of uncorrelated breakup events, independent of the initial droplet size. The size and number density of the newly produced droplets is governed by the Fokker–Planck equation for the evolution of the pdf of droplet radii. The parameters of the model are obtained dynamically by relating them to the local Weber number and resolved scale turbulence properties. A hybrid particle-parcel is used to represent the large number of spray droplets. The predictive capability of the LES together with Lagrangian droplet dynamics models to capture the droplet dispersion characteristics, size distributions, and the spray evolution is examined in detail by comparing it with the spray patternation study for the gas-turbine injector. The present approach is computationally efficient and captures the global features of the fragmentary process of liquid atomization in complex configurations.     

Electro-organic synthesis and characterization of new dihydroxybenzene dinitrile derivatives with fluorescent properties

Novel fluorescent molecules were synthesized by designing an environmentally friendly method involving the bulk electrolysis technique. This electrochemical treatment process helps protect the environment by minimizing the toxic waste component of effluent. The electrochemical oxidation of 3,6-dihydroxybenzene-1,2-dinitrile (DBD) in the presence of benzenesulfinic acids was studied in an aqueous solution (H(2)O : AN, 90 : 10), which included an acetate buffer (pH=5.0). This research utilized a variety of experimental techniques, including cyclic voltammetry, controlled-potential electrolysis as well as spectroscopic identification of compounds produced as products. In addition, our fluorescent studies offered results in line with existing findings. At the wavelength of 205 nm, DBD and compound (6) were excited and their fluorescent emissions were monitored.     

Screening method for phthalate esters in water using liquid-phase microextraction based on the solidification of a floating organic microdrop combined with gas chromatography-mass spectrometry

A simple and efficient liquid-phase microextraction (LPME) technique was developed using directly suspended organic microdrop coupled with gas chromatography–mass spectrometry (GC–MS), for the extraction and the determination of phthalate esters (dimethyl phthalate, diethyl phthalate, diallyl phthalate, di-n-butyl phthalate (DnBP), benzyl butyl phthalate (BBP), dicyclohexyl phthalate and di-2-ethylhexyl phthalate (DEHP)) in water samples. Microextraction efficiency factors, such as nature and volume of the organic solvent, temperature, salt effect, stirring rate and the extraction time were investigated and optimized. Under the optimized extraction conditions (extraction solvent: 1-dodecanol; extraction temperature: 60 °C; microdrop volume: 7 μL; stirring rate: 750 rpm, without salt addition and extraction time: 25 min), figures of merit of the proposed method were evaluated. The values of the detection limit were in the range of 0.02–0.05 μg L⁻¹, while the R.S.D.% value for the analysis of 5.0 μg L⁻¹ of the analytes was below 7.7% (n = 4). A good linearity (r² ≥ 0.9940) and a broad linear range (0.05–100 μg L⁻¹) were obtained. The method exhibited enrichment factor values ranging from 307 to 412. Finally, the designed method was successfully applied for the preconcentration and determination of the studied phthalate esters in different real water samples and satisfactory results were attained.     

Ultrasensitive separation of methylprednisolone acetate using a photoresponsive molecularly imprinted polymer incorporated polyester dendrimer based on magnetic nanoparticles

We developed an approach for the use of polyester dendrimer during the imprinting process to raise the number of recognized sites in the polymer matrix and improve its identification ability. Photoresponsive molecularly imprinted polymers were synthesized on modified magnetic nanoparticles involving polyester dendrimer which uses the reactivity between allyl glycidyl ether and acrylic acid for the high‐yielding assembly by surface polymerization. The photoresponsive molecularly imprinted polymers were constructed using methylprednisoloneacetate as the template, water‐soluble azobenzene involving 5‐[(4, 3‐(methacryloyloxy) phenyl) diazenyl] dihydroxy aniline as the novel functional monomer, and ethylene glycol dimethacrylate as the cross‐linker. Through the evaluation of a series of features of spectroscopic and nano‐structural, this sorbent showed excellent selective adsorption, recognition for the template, and provided a highly selective and sensitive strategy for determining the methylprednisoloneacetate in real and pharmaceutical samples. In addition, this sorbent according to good photo‐responsive features and specific affinity to methylprednisoloneacetate with high recognition ability, represented higher binding capacity, a more extensive specific area, and faster mass transfer rate than its corresponding surface molecularly imprinted polymer.     

Determination of Salbutamol, Amikacin and Paromomycin Sulfate by a Novel Sulfate Polymeric Membrane Sensor Based on 2,6-diphenyl 4-(4-methoxyphenyl) pyrylium perchlorate

A novel sulfate polymeric membrane sensor based on 2,6-diphenyl 4-(4-methoxyphenyl) pyrylium perchlorate (DMPP) as a sensing material is presented. The electrode displays a very low detection limit (4.0×10^–7M) and wide working concentration range (8.0×10^–7–1.0×10^–1M). The sensor shows remarkable selectivity toward sulfate over most common organic and inorganic anions, including chloride, acetate, nitrate, nitrite, bromide, iodide, thiocyanate, phosphate, fluoride, sulfite, hydrogen sulfite, hydrogen carbonate, citrate, tartarate and oxalate. The sensor reveals a Nernstian behavior (slope of –29.7±0.5mV per decade) in a wide pH range (3.0–9.5). The proposed sensor shows a short response time over the entire working range (15s) and was successfully applied to the direct determination of salbutamol, amikacin and paromomycin sulfate.     

Photophysical studies of uranyl complexes: VIII. Luminescence spectra of UO2SO4 · 312H2O and two polymorphs of bis(urea) uranyl sulfate

The photoluminescence spectra of hydrated and anhydrous uranyl sulfates have been studied under conditions of high resolution at cryogenic temperatures. All uranyl sulfate systems were found to yield nonequivalent spectra: the energies for the electronic and vibronic origins were found to vary with the system, and certain uranyl vibrational frequencies exhibited a dependence on environment. These differences must reflect the various ways in which the uranyl centers are linked by the bridging sulfate groups, as this linking is the main difference between the various structures.     

Amine-carbon disulfide promoted synthesis of novel benzo[e][1,3]thiazepin-5(1H)-one derivatives

In this paper, a simple method is introduced for the synthesis of novel 4-substituted-3-thioxo-3,4-dihydrobenzo[e][1,3]thiazepin-5(1H)-one derivatives. The synthesis is based on a two-step reaction of 2-methylbenzoic acid, an amine, and carbon disulfide. In the first step, 2-methylbenzoic acid reacts with sulfuric acid in ethanol, followed by the reaction with N-bromosuccinimide to produce ethyl 2-(bromomethyl)benzoate. Amine and carbon disulfide react in a separate flask in basic medium to give carbamodithioate salt. Carbamodithioate and ethyl 2-(bromomethyl)benzoate react together in dimethylformamide to produce the desired 4-substituted-3-thioxo-3,4-dihydrobenzo[e][1,3]thiazepin-5(1H)-one derivatives. The method is simple and fast and is applicable to a wide variety of substrates and gives the desired products in high isolated yields.