Screening method for phthalate esters in water using liquid-phase microextraction based on the solidification of a floating organic microdrop combined with gas chromatography-mass spectrometry

A simple and efficient liquid-phase microextraction (LPME) technique was developed using directly suspended organic microdrop coupled with gas chromatography–mass spectrometry (GC–MS), for the extraction and the determination of phthalate esters (dimethyl phthalate, diethyl phthalate, diallyl phthalate, di-n-butyl phthalate (DnBP), benzyl butyl phthalate (BBP), dicyclohexyl phthalate and di-2-ethylhexyl phthalate (DEHP)) in water samples. Microextraction efficiency factors, such as nature and volume of the organic solvent, temperature, salt effect, stirring rate and the extraction time were investigated and optimized. Under the optimized extraction conditions (extraction solvent: 1-dodecanol; extraction temperature: 60 °C; microdrop volume: 7 μL; stirring rate: 750 rpm, without salt addition and extraction time: 25 min), figures of merit of the proposed method were evaluated. The values of the detection limit were in the range of 0.02–0.05 μg L⁻¹, while the R.S.D.% value for the analysis of 5.0 μg L⁻¹ of the analytes was below 7.7% (n = 4). A good linearity (r² ≥ 0.9940) and a broad linear range (0.05–100 μg L⁻¹) were obtained. The method exhibited enrichment factor values ranging from 307 to 412. Finally, the designed method was successfully applied for the preconcentration and determination of the studied phthalate esters in different real water samples and satisfactory results were attained.     

Singlet oxygen chemistry in water: a porous vycor glass-supported photosensitizer

Singlet molecular oxygen [1O2 (1Deltag)] is generated cleanly in aqueous solution upon irradiation of a heterogeneous complex, meso-tetra(N-methyl-4-pyridyl)porphine (1) adsorbed onto porous Vycor glass (PVG). The cationic photosensitizer 1 tightly binds onto PVG and gives a stable material, which does not dissociate 1 into the surrounding aqueous phase. The production of 1O2 was measured by monitoring the time-resolved 1O2 (1Deltag) phosphorescence at 1270 nm. Indirect analysis of 1O2 generation was also carried out with the photooxidation of trans-2-methyl-2-pentenoate anion, which afforded the corresponding hydroperoxide. Sensitizer-1-impregnated PVG gives rise to a new singlet oxygen generator but more importantly provides a heterogeneous system for use in water.     

Electro-organic synthesis and characterization of new dihydroxybenzene dinitrile derivatives with fluorescent properties

Novel fluorescent molecules were synthesized by designing an environmentally friendly method involving the bulk electrolysis technique. This electrochemical treatment process helps protect the environment by minimizing the toxic waste component of effluent. The electrochemical oxidation of 3,6-dihydroxybenzene-1,2-dinitrile (DBD) in the presence of benzenesulfinic acids was studied in an aqueous solution (H(2)O : AN, 90 : 10), which included an acetate buffer (pH=5.0). This research utilized a variety of experimental techniques, including cyclic voltammetry, controlled-potential electrolysis as well as spectroscopic identification of compounds produced as products. In addition, our fluorescent studies offered results in line with existing findings. At the wavelength of 205 nm, DBD and compound (6) were excited and their fluorescent emissions were monitored.     

Multi-objective assembly permutation flow shop scheduling problem: a mathematical model and a meta-heuristic algorithm

This study is devoted to schedule a three-stage manufacturing system including machining, assembly and batch processing stages. The system is supposed to be capable of manufacturing a variation of products. At the first stage, the need for machining raw parts causes the manufacturer to deal with a flow shop scheduling problem. In the next stage, processed parts should be assembled together in order to form desired products. It is noteworthy that several operations are not allowed to be executed simultaneously on the same machine. Second stage should be considered as a single-assembly line or a single team of operators, and finally the manufacturing processing stage. The considered objectives are to minimize completion time of all products (makespan) and sum of the earliness and tardiness costs, simultaneously. First, the proposed scheduling problem is formulated into a mixed-integer mathematical model, and then owing to the NP-hardness of the concluded model a meta-heuristic approach is applied. A hybrid algorithm is modified to create a powerful method in searching the discrete solution space of this problem by taking advantage of superiorities of both Genetic Algorithm and Particle Swarm Optimization methods. Numerical experiments are designed to evaluate the performance of the proposed algorithm.     

Photophysical studies of uranyl complexes: VIII. Luminescence spectra of UO2SO4 · 312H2O and two polymorphs of bis(urea) uranyl sulfate

The photoluminescence spectra of hydrated and anhydrous uranyl sulfates have been studied under conditions of high resolution at cryogenic temperatures. All uranyl sulfate systems were found to yield nonequivalent spectra: the energies for the electronic and vibronic origins were found to vary with the system, and certain uranyl vibrational frequencies exhibited a dependence on environment. These differences must reflect the various ways in which the uranyl centers are linked by the bridging sulfate groups, as this linking is the main difference between the various structures.     

Stochastic modeling of atomizing spray in a complex swirl injector using large eddy simulation

Large-eddy simulation of an atomizing spray issuing from a gas-turbine injector is performed. The filtered Navier–Stokes equations with dynamic subgrid scale model are solved on unstructured grids to compute the swirling turbulent flow through complex passages of the injector. The collocated grid, incompressible flow algorithm on arbitrary shaped unstructured grids developed by Mahesh et al. (J. Comp. Phys. 197 (2004) 215–240) is used in this work. A Lagrangian point-particle formulation with a stochastic model for droplet breakup is used for the liquid phase. Following Kolmogorov’s concept of viewing solid particle-breakup as a discrete random process, the droplet breakup is considered in the framework of uncorrelated breakup events, independent of the initial droplet size. The size and number density of the newly produced droplets is governed by the Fokker–Planck equation for the evolution of the pdf of droplet radii. The parameters of the model are obtained dynamically by relating them to the local Weber number and resolved scale turbulence properties. A hybrid particle-parcel is used to represent the large number of spray droplets. The predictive capability of the LES together with Lagrangian droplet dynamics models to capture the droplet dispersion characteristics, size distributions, and the spray evolution is examined in detail by comparing it with the spray patternation study for the gas-turbine injector. The present approach is computationally efficient and captures the global features of the fragmentary process of liquid atomization in complex configurations.     

Some notes on amenability and weak amenability of Lau product of Banach algebras defined by a Banach algebra morphism

Let A and B be Banach algebras and T : B → A be a continuous homomorphism. nweak amenability of the Banach algebra A ×T B(defined in Bade, W. G., Curtis, P. C., Dales, H. G.:Amenability and weak amenability for Beurling and Lipschitz algebras. Proc. London Math. Soc.,55(2), 359–377(1987)) is studied. The new version of a Banach algebra defined with a continuous homomorphism is introduced and Arens regularity and various notions of amenability of this algebra are studied.     

Hollow Zn/Co Zeolitic Imidazolate Framework (ZIF) and Yolk–Shell Metal@Zn/Co ZIF Nanostructures

Metal–organic frameworks (MOFs) feature a great possibility for a broad spectrum of applications. Hollow MOF structures with tunable porosity and multifunctionality at the nanoscale with beneficial properties are desired as hosts for catalytically active species. Herein, we demonstrate the formation of well‐defined hollow Zn/Co‐based zeolitic imidazolate frameworks (ZIFs) by use of epitaxial growth of Zn‐MOF (ZIF‐8) on preformed Co‐MOF (ZIF‐67) nanocrystals that involve in situ self‐sacrifice/excavation of the Co‐MOF. Moreover, any type of metal nanoparticles can be accommodated in Zn/Co‐ZIF shells to generate yolk–shell metal@ZIF structures. Transmission electron microscopy and tomography studies revealed the inclusion of these nanoparticles within hollow Zn/Co‐ZIF with dominance of the Zn‐MOF as shell. Our findings lead to a generalization of such hollow systems that are working effectively to other types of ZIFs.