Stripping Voltammetry of Cerium(IIl) with a Chemically Modified Carbon Paste Electrode Containing Functionalized Nanoporous Silica Gel

This research introduces the design of an adsorptive stripping voltammetric method for the cerium(III) determination at a carbon paste electrode, chemically modified with dipyridyl‐functionalized nanoporous silica gel (DPNSG‐CPE). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/dipyridyl complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (1.0–28 ng mL^?1). The precision for seven determinations of 4 and 10 ng mL^?1 Ce(III) was 3.2% and 2.5% (relative standard deviation), respectively. The prepared electrode was used for the cerium determination in real samples and very good recovery results were obtained.     

A perspective view of top‐down proteomics in snake venom research

The venom produced by snakes contains complex mixtures of pharmacologically active proteins and peptides which play a crucial role in the pathophysiology of snakebite diseases. The deep understanding of venom proteomes can help to improve the treatment of this “neglected tropical disease” (as expressed by the World Health Organization [WHO]) and to develop new drugs. The most widely used technique for venom analysis is liquid chromatography/tandem mass spectrometry (LC/MS/MS)‐based bottom‐up (BU) proteomics. Considering the fact that multiple multi‐locus gene families encode snake venom proteins, the major challenge for the BU proteomics is the limited sequence coverage and also the “protein inference problem” which result in a loss of information for the identification and characterization of toxin proteoforms (genetic variation, alternative mRNA splicing, single nucleotide polymorphism [SNP] and post‐translational modifications [PTMs]). In contrast, intact protein measurements with top‐down (TD) MS strategies cover almost complete protein sequences, and prove the ability to identify venom proteoforms and to localize their modifications and sequence variations.     

Effect of thickness on the capacitive behavior and stability of ultrathin polyaniline for high speed super capacitors

In this work four polyaniline (PANI) film electrode with different thickness were synthesized by electrochemical method on the surface of glassy carbon (GC) electrode. Four polymer films with various thicknesses from 0.5 to 11 μm were synthesized. Electropolymerization occurs in low monomer concentration. Morphology study of electrode shows that surface structure of polymers depends on film thickness. Capacitance of electrode was studied by CV and charge-discharge (CD) methods. Specific capacitance (SC) of electrodes using cyclic voltammetry were calculated 620, 247 F g^–1 for thinnest and thickest polymer film, respectively. Stability of electrodes was studied during 1000 voltammogram cycles. Results show that with the increase of thickness the stability of electrodes enhanced and reach to a maximum and then decreased.     

Solid drop based liquid-phase microextraction

Solid drop based liquid-phase microextraction (SDLPME) is a novel sample preparation technique possessing obvious advantages of simple operation with a high pre-concentration factor, low cost and low consumption of organic solvent. SDLPME coupled with gas chromatography (GC), high-performance liquid chromatography (HPLC), and atomic absorption spectrometry (AAS) has been widely applied to the analyses of a different variety of samples. The basic principles, parameters affecting the extraction efficiency, and the latest applications of SDLPME are reviewed in this article.     

Detection of Aeromonas hydrophila DNA oligonucleotide sequence using a biosensor design based on Ceria nanoparticles decorated reduced graphene oxide and Fast Fourier transform square wave voltammetry

A new strategy was introduced for ssDNA immobilization on a modified glassy carbon electrode. The electrode surface was modified using polyaniline and chemically reduced graphene oxide decorated cerium oxide nanoparticles (CeO₂NPs-RGO). A single-stranded DNA (ssDNA) probe was immobilized on the modified electrode surface. Fast Fourier transform square wave voltammetry (FFT-SWV) was applied as detection technique and [Ru(bpy)₃]^2+/3+ redox signal was used as electrochemical marker. The hybridization of ssDNA with its complementary target caused a dramatic decrease in [Ru(bpy)₃]^2+/3+ FFT-SW signal. The proposed electrochemical biosensor was able to detect Aeromonas hydrophila DNA oligonucleotide sequence encoding aerolysin protein. Under optimal conditions, the biosensor showed excellent selectivity toward complementary sequence in comparison with noncomplementary and two-base mismatch sequences. The dynamic linear range of this electrochemical DNA biosensor for detecting 20-mer oligonucleotide sequence of A. hydrophila was from 1 × 10⁻¹⁵ to 1 × 10⁻⁸ mol L⁻¹. The proposed biosensor was successfully applied for the detection of DNA extracted from A. hydrophila in fish pond water up to 0.01 μg mL⁻¹ with RSD of 5%. Besides, molecular docking was applied to consider the [Ru(bpy)₃]^2+/3+ interaction with ssDNA before and after hybridization.     

A new way to evaluate the Probability and Fresnel integrals

In this article, we show how Laplace Transform may be used to evaluate variety of nontrivial improper integrals, including Probability and Fresnel integrals. The algorithm we have developed here to evaluate Probability, Fresnel and other similar integrals seems to be new. This method transforms the evaluation of certain improper integrals into evaluation of improper integrals of the corresponding Laplace transform, which in many cases are much easier.     

Structural study of 2-(1-oxo-1 H-inden-3-yl)-2H-indene-1,3-dione by DFT calculations, NMR and IR spectroscopy

Computational studies have been carried out at the DFT-B3LYP/6-31G(d) level of theory on the structural and spectroscopic properties of 2-(1-oxo-1 H-inden-3-yl)-2H-indene-1,3-dione (OID). Experimental studies were conducted on these parameters, including X-ray, FT-IR and 13C NMR spectroscopy. The optimized geometries of OID and its bonding characteristics as well as IR and NMR spectra have been calculated and analyzed. It was observed that the bond lengths and angles in the molecule, obtained by X-ray, IR and NMR at the level of theory, were in a good agreement with those of the experiment. The correlation between the theoretical and the experimental vibrational frequencies and the chemical shifts of the OID molecule were 0.994 and 0.991, respectively. The agreement mutually verified the accuracy of the experimental method and the validity of the applied mathematical model.     

A novel Lu fluorescent nano-chemosensor using new functionalized mesoporous structures

A new Lu³⁺ sensitive fluorescent chemosensor is designed using 8-hydroxyquinoline functionalized mesoporous silica with highly ordered structure (LUS-SPS-Q). The characterization of LUS-SPS-Q showed that the organized structure has been preserved after the post grafting procedure. The synthesized material showed a selective interaction with Lu³⁺ ion, most probably due to the presence of the fluorophore moiety at its surface. The emission intensity of the Lu³⁺-bound mesoporous material increases with an increase in concentrations of Lu³⁺ ion. Addition of other mono-, di-, trivalent ions resulted in insignificant change in the fluorescent intensity. The enhancement of fluorescence is attributed to the strong covalent binding of Lu³⁺ ion. The linear response range of Lu³⁺ chemo-sensor was from 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol L⁻¹. The Limit of detection obtained was 8.2 × 10⁻⁸ mol L⁻¹ and the pH range which the proposed chemo-sensor can be applied was 3.3–8.3.