Effect of engineered PLGA‐gelatin‐chitosan/PLGA‐gelatin/PLGA‐gelatin‐graphene three‐layer scaffold on adhesion/proliferation of HUVECs

A three‐layered fibrous scaffold composed of fibers of different diameters in each layer was fabricated in correspondence with the structure of the blood vessels. Effect of solution and electrospinning parameters on morphology and diameters of the fibers were investigated by scanning electron microscopy (SEM), for each layer. The SEM images showed that 18% poly (lactic‐co‐glycolic acid) (PLGA)‐gelatin‐chitosan in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP)/acid acetic solution resulted in bead‐free fibers for the outer layer. For the middle layer, 18% PLGA‐gelatin in HFIP at 13 kV with 13 cm needle to collector distance was chosen as the optimum condition. SEM imaging demonstrated that by increasing graphene content from 0.5 to 2 wt% in the inner layer (as an electrically conductive/platelet anti‐adhesion material), the fiber diameter decreased from 324.01 ± 58.90 to 288.59 ± 70.77 nm. The effect of gelatin crosslinking on the microstructure of the fibers was also examined. Shrinkage ratio decreased from 57 to below 21% upon crosslinking of the three‐layered scaffold in exposure to vapor of 50% glutaraldehyde solution for 2 hours. Mechanical test showed that tensile strength of the crosslinked three‐layer scaffold in the longitudinal direction was 2.90 MPa which is comparable to that of the vein and artery. The MTT [3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide] assay displayed cell viability of above 96% for the PLGA‐gelatin containing 2 wt% graphene. SEM analysis revealed that the addition of graphene to PLGA‐gelatin (up to 2%) causes a remarkable improvement in cell adhesion.     

Speciation of chromium in environmental samples by dual electromembrane extraction system followed by high performance liquid chromatography

This study proposes the dual electromembrane extraction followed by high performance liquid chromatography for selective separation-preconcentration of Cr(VI) and Cr(III) in different environmental samples. The method was based on the electrokinetic migration of chromium species toward the electrodes with opposite charge into the two different hollow fibers. The extractant was then complexed with ammonium pyrrolidinedithiocarbamate for HPLC analysis. The effects of analytical parameters including pH, type of organic solvent, sample volume, stirring rate, time of extraction and applied voltage were investigated. The results showed that Cr(III) and Cr(VI) could be simultaneously extracted into the two different hollow fibers. Under optimized conditions, the analytes were quantified by HPLC instrument, with acceptable linearity ranging from 20 to 500 μg L⁻¹ (R² values ≥ 0.9979), and repeatability (RSD) ranging between 9.8% and 13.7% (n = 5). Also, preconcentration factors of 21.8–33 that corresponded to recoveries ranging from 31.1% to 47.2% were achieved for Cr(III) and Cr(VI), respectively. The estimated detection limits (S/N ratio of 3:1) were less than 5.4 μg L⁻¹. Finally, the proposed method was successfully applied to determine Cr(III) and Cr(VI) species in some real water samples.     

AuB2 in comparison to superconducting MgB2-an ab initio study

The noble metal diboride AuB₂, a potential candidate for superconductor, is studied by an ab initio method in comparison to the superconducting MgB₂. The results, described in terms of equilibrium lattice constants, bulk modulus, pressure derivative of bulk modulus and their in- and out-of-plane linear values, volume coefficient of T_c, density of states, band structure, show some similarity as well as dissimilarity between the behaviour of the two compounds. The implications for the behaviour are discussed.     

Lithium scandium phosphate-based electrolytes for solid state lithium rechargeable microbatteries

Li₃Sc₂(PO₄)₃ is a promising candidate for use as an electrolyte in solid state lithium rechargeable microbatteries due to its stability in air, ease of preparation, and resistance to dielectric breakdown. The room temperature ionic conductivity was optimized resulting in an increase of over two orders of magnitude to 3×10⁻⁶S/cm. The formation of Li₃(Sc_2−xM_x)(PO₄)₃, where M=Al³⁺ or Y³⁺, resulted in the decrease of porosity, greater sinterability, and considerable enhancement of the ionic conductivity. Yttrium substitutions enhanced the conductivity slightly while aluminum increased the room temperature ionic conductivity to 1.5×10⁻⁵S/cm for x=0.4. Preliminary electron beam evaporation of Li₃Sc₂(PO₄)₃ yielded amorphous thin films with ion ic conductivity as high as 5×10⁻⁵S/cm and a composition of Li_4.8Sc_1.4(PO₄)₃.     

Silica-supported cobalt(II) tetrasulfophthalocyanine catalyzed aerobic oxidation of thiols to disulfides under neutral conditions

A very simple and mild reaction is described for the aerobic oxidative coupling of thiols to disulfides by silica-supported cobalt(II) tetrasulfophthalocyanine as the catalyst in non-aqueous media under neutral conditions at room temperature. The catalyst can be reused for the oxidative coupling of several thiols without any significant loss of catalytic activity. Correspondence: Ahmad Shaabani, Department of Chemistry, Shahid Beheshti University, P.O. Box 19396, 4716 Tehran, Iran.     

Synthesis of 3‐substituted indoles promoted by pulverization‐activation method catalyzed by Bi(NO3)3·5H2O

A new, facile, efficient, “green” and chemoselective procedure for the synthesis of indole derivatives has been developed with pulverization‐activation method catalyzed by Bi(NO₃)₃·5H₂O (PAMC‐ Bi(NO₃)₃·5H₂O) through grinding of indoles with aldehydes or Michael acceptors in the presence of catalytic amounts of Bi(NO₃)₃·5H₂O under solvent‐free conditions.     

On-line electrochemically controlled in-tube solid phase microextraction of inorganic selenium followed by hydride generation atomic absorption spectrometry

In this work, for the first time, a rapid, simple and sensitive microextraction procedure is demonstrated for the matrix separation, preconcentration and determination of inorganic selenium species in water samples using an electrochemically controlled in-tube solid phase microextraction (EC-in-tube SPME) followed by hydride generation atomic absorption spectrometry (HG-AAS). In this approach, in which EC-in-tube SPME and HG-AAS system were combined, the total analysis time, was decreased and the accuracy, repeatability and sensitivity were increased. In addition, to increases extraction efficiency, a novel nanostructured composite coating consisting of polypyrrole (PPy) doped with ethyleneglycol dimethacrylate (EGDMA) was prepared on the inner surface of a stainless-steel tube by a facile electrodeposition method. To evaluate the offered setup and the new PPy-EGDMA coating, it was used to extract inorganic selenium species in water samples. Extraction of inorganic selenium species was carried out by applying a positive potential through the inner surface of coated in-tube under flow conditions. Under the optimized conditions, selenium was detected in amounts as small as 4.0 parts per trillion. The method showed good linearity in the range of 0.012–200 ng mL⁻¹, with coefficients of determination better than 0.9996. The intra- and inter-assay precisions (RSD%, n = 5) were in the range of 2.0–2.5% and 2.7–3.2%, respectively. The validated method was successfully applied for the analysis of inorganic selenium species in some water samples and satisfactory results were obtained.     

Biosynthesis and Chemical Characterization of Silver Nanoparticles Using Satureja Rechingeri Jamzad and Their Apoptotic Effects on AGS Gastric Cancer Cells

Journal of Cluster Science - Since green synthesis of silver nanoparticles (AgNPs) is a simple, safe, cost-effective and eco-friendly method, AgNPs appear to be promising anti-cancer agents in the...     

Lattice Boltzmann Solver for Multiphase Flows: Application to High Weber and Reynolds Numbers

The lattice Boltzmann method, now widely used for a variety of applications, has also been extended to model multiphase flows through different formulations. While already applied to many different configurations in low Weber and Reynolds number regimes, applications to higher Weber/Reynolds numbers or larger density/viscosity ratios are still the topic of active research. In this study, through a combination of a decoupled phase-field formulation—the conservative Allen–Cahn equation—and a cumulant-based collision operator for a low-Mach pressure-based flow solver, we present an algorithm that can be used for higher Reynolds/Weber numbers. The algorithm was validated through a variety of test cases, starting with the Rayleigh–Taylor instability in both 2D and 3D, followed by the impact of a droplet on a liquid sheet. In all simulations, the solver correctly captured the flow dynamics andmatched reference results very well. As the final test case, the solver was used to model droplet splashing on a thin liquid sheet in 3D with a density ratio of 1000 and kinematic viscosity ratio of 15, matching the water/air system at We = 8000 and Re = 1000. Results showed that the solver correctly captured the fingering instabilities at the crown rim and their subsequent breakup, in agreement with experimental and numerical observations reported in the literature.