Investigation of vacancy defects effects on the buckling behavior of SWCNTs via a structural mechanics approach

In this paper, the influence of various vacancy defects on the critical buckling loads and strains in carbon nanotubes under axial compression is investigated via a new structural model in ABAQUS software. The necessity of desirable conditions and expensive tests for experimental methods, in addition to the time expenditure required for atomic simulations, are the motivation for this work, which, in addition to yielding accurate results, avoids the obstacles of the previous methods. In fact, this model is a combination of other structural models designed to eliminate the deficiencies inherent in individual approaches. Because the present model is constructed in the CAE space of ABAQUS, there is no need to program for different loading and boundary conditions. A nonlinear connector is considered for modeling of stretching and torsional interactions, and a nonlinear spring is used for modeling of the angle variation interactions. A Morse potential is employed for stretching and bending potentials, and a periodic type of bond torsion is used for torsion interactions. The effect of different types of vacancy defects at various locations on the critical buckling loads and strains is studied for zigzag and armchair nanotubes with various aspect ratios (Length/Diameter). Comparison of our results with those of buckling of shells with cutouts indicates that vacancy defects in the carbon nanotubes can most likely be modeled as cutouts of the shells. Finally, results of the present structural model are compared with those from molecular dynamics (MD) simulation and show good agreement between our model and the MD model.     

Glassy carbon electrode modified by new Copper(I) oxide nanocomposite for glucose detection: An electroanalysis study

The Glucose amount of human blood is very vital because in higher levels than allowed value the corporal biological system was hampered. Therefore, in this study, the Cu₂O was deposited on the reduced Graphene oxide (RGO) by polydopamin (PDA) as linker. The new RGO‐PDA‐Cu₂O nanocomposite was deposited on the glassy carbon electrode (GCE) surface after its characterization by UV–Visible, fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), Energy‐dispersive X‐ray (EDX), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) techniques. The electroanalysis of the new electrode was investigated by the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) methods. The obtained detection limit of glucose (Glu) showed that the deposited GCE by RGO‐PDA‐Cu₂O nanocomposite has a high potential for its diagnosis. In addition, this electrode was applied to the Glu detection as biosensor in real samples in order to utilize in commercial applications.     

The effect of electric field and Al doping on the sensitivity of hexa‐peri‐hexabenzocoronene nanographene to chloropicrin

It has been previously reported that the recently synthesized hexa‐peri‐hexabenzocoronene (HBC) nanographene cannot detect toxic chloropicrin (CP) gas. To overcome this problem, we examined the effect of Al doping and applying an electric field on the sensitivity of HBC towards CP gas by means of density functional theory calculations. We found that the Al‐doping process significantly increases the adsorption energy of CP gas from ?7.1 to ?39.9 kcal mol^?1 but decreases the sensitivity of HBC. By applying an electric field, the HBC is polarized with two different electrostatic potentials on its different surfaces, which increases the adsorption energy. By increasing the electric field strength, the adsorption energy and electronic sensitivity of HBC are increased. We predicted that in the presence of an electric field of about ?0.025 au, HBC can act as an electronic senor or a work function‐type sensor with a short recovery time. At this field, the electrical conductivity of HBC is significantly increased on CP adsorption which generates an electrical signal. Increasing the electric field to higher intensities is not favourable because of increasing recovery times, and decreasing it to lower intensities reduces the sensitivity of HBC.     

Rapid growth of hydroxyapatite nanoparticles using ultrasonic irradiation

A rapid, environmental friendly and low-cost method to prepare hydroxyapatite nanoparticles is proposed. In this method, hydroxyapatite is produced in a sonicated pseudo-body solution. The sonication time was found effective in the formation of the crystalline phase of nanoparticles. In our experimental condition, 15 min sonication resulted in the most pure hydroxyapatite phase. Also it was shown that growth temperature is a crucial factor and hydroxyapatite crystallizes only at 37 °C. The particles formed by sonication were generally smaller and more spherical than those obtained without sonication. Sonication increased the hydroxyapatite crystal growth rate up to 5.5 times compared to non-sonication condition. The comparison between the specific surface area of hydroxyapatite nanoparticles obtained by sonication and without sonication demonstrated that sonication increased the specific surface area from 63 m²/g to 107 m²/g and decreased the size of nanoparticles from 30 nm to 18 nm. Analysis on the pore structure demonstrated that the fractal structures obtained with and without sonication were considerably different.     

Synthesis of multi-wall carbon nanotubes by copper vapor laser

Synthesis of multi-wall carbon nanotubes in a 1473 K furnace using a copper vapor laser (CVL) is reported. The operating parameters of this laser, i.e. a high fluence at the focal point and an extremely high frequency of 10 kHz, distinguished it from common laser sources in the synthesis of CNTs. Therefore, the unexpected experimental findings, the formation of MWNTs instead of the generally reported SWNTs, would be verified by these two notable parameters. Electron microscopy beside Raman spectroscopy illustrates the presence of multi-wall carbon nanotubes in the resulting product.     

Synthesis of silyl-protected terminal thioalkyne-substituted tetraaryl imidazoles: utilization of Ag–Fe/ZSM-5 bimetallic nanooxides for cyclocondensation of polysubstituted imidazoles

Research on Chemical Intermediates - An improved one-pot and ecofriendly approach to tri- and tetraaryl imidazoles through three- and four-component coupling reactions under neutral and...     

Electrocatalytic Reduction of Metronidazole on Bismuth Modified Pencil‐lead Electrode

We report a new and simple approach based on an experimental design method for the preparation of pencil‐lead electrode modified with bismuth thin film. The fabrication process consists of reduction of bismuth on the surface of electrode with potentiostate method. Response surface methodology was developed as experimental strategies for modeling and optimization of the influence of some variables on the performance of modified electrode. The electrocatalytic behavior of this modified electrode was exploited as a sensitive detection system for the mercury‐free reduction and determination of metronidazole in pharmaceutical and biological samples by using differential pulse voltammetry and amperometry methods.     

Unmodified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanostructure promoted with external magnetic field: safe,magnetically recoverable,and efficient nanocatalyst for N- and C-alkylation reactions in green conditions

Transition metal compounds have emerged as suitable catalysts for organic reactions. Magnetic compounds as soft Lewis acids can be used as catalysts for organic reactions. In this report, the Fe₃O₄ nanostructures were obtained from Fe²⁺ and Fe³⁺-salts, under an external magnetic field (EMF) without any protective agent. The X-ray photoelectron spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy tools were used to characterize these magnetic compounds. The two-dimensional (2-D, it showed nanometric size in the two dimensions, nanorod structure) Fe₃O₄ compound showed high catalytic activity and stability in N- and C-alkylation reactions. A diverse range of N- and C-alkylation products were obtained in moderate to high yield under green and mild conditions in air. Also the N- and C-alkylation products can be obtained with different selectivity and yield by exposure reactions with EMF. Results of alkylation reactions showed that the presence of Fe(II) and Fe(III) species on the surface of magnetic catalysts (phase structure of magnetic compounds) are essential as very cheap active sites. Also, morphology of magnetic catalysts had influence on their catalytic performances. After the reaction, the catalyst/product(s) separation could be easily achieved with an external magnet and more than 95% of catalyst could be recovered. The catalyst was reused at least four times without any loss of its high catalytic activity for N- and C-alkylation reactions.     

Polystyrene bis[N-(2-pyridyl) sulfonamide] palladium(II): Synthesis,characterization as a catalyst for coupling reactions

The [N-(2-pyridyl)] para-styrene sulfonamide (PSS) was prepared as a monomer, from the reaction of para-styrene sulfonyl chloride and 2-amino pyridine in the presence of potassium hydroxide solution 0.5 M as a base, and CH₃Cl. Polystyrene [N-(2-pyridyl) sulfonamide] (PPSS) was synthesized from the polymerization of [N-(2-pyridyl)] para-styrene sulfonamide (PSS). The Polystyrene bis [N-(2-pyridyl) sulfonamide] palladium (II) as a polymer- supporting palladium complex was also prepared from the reaction of PdCl₂ (CH₃CN)₂ with PPSS in the presence of KOH 0.5 M. Polystyrene bis [N-(2-pyridyl) sulfonamide] palladium (II) is produced as a novel heterogeneous catalyst for coupling reactions for C-C bond formation. This method includes higher yield and has an easier work-up procedure. The structures of the monomer, polymer and its Pd complex were confirmed by using FT-IR and ¹H-NMR spectroscopy. Elemental analysis of Pd by inductively coupled plasma (ICP) technique and hot filtration test showed loading of the metal into solution from the catalyst The heterogeneous catalyst was recycled without any loss in its properties.