Site-specific cleavage of human telomerase RNA using PNA-neocuproine.Zn(II) derivatives

Here we report the synthesis of a novel PNA based neocuproine.Zn RNA cleaving agent; we demonstrate that such agents sequence specifically cleave a synthetic RNA target and in particular the RNA component of human telomerase.     

Copper(II) chloride complexes with multimodal ligands based on the cyclotriphosphazene platform

The reaction of hexakis(2-pyridyloxy)cyclotriphosphazene (L) and hexakis(4-methyl-2-pyridyloxy)cyclotriphosphazene (MeL) with copper(ii) chloride afford the complexes [CuLCl(2)], [(CuCl(2))(2)(MeL)], [CuLCl]PF(6) and [Cu(MeL)Cl]PF(6). The single-crystal X-ray structure of [CuLCl(2)] shows the copper ion to be in a square based pyramidal distorted trigonal bipyramidal (SBPDTBP) environment (tau= 0.47) with L acting as a kappa(3)N donor, coordinating via the nitrogen atoms from two non-geminal pyridyloxy pendant arms, a nitrogen atom in the phosphazene ring and two chloride ions. In the dimetallic complex, [(CuCl(2))(2)(MeL)], the geometry about both (symmetry related) copper(ii) centres is also SBPDTBP (tau= 0.57) with a 'N(3)Cl(2)' donor set. In the monocation of [CuLCl]PF(6), L acts as a kappa(5)N donor, bonding to the copper(ii) centre through the nitrogen atoms of four pyridyloxy pendant arms, a phosphazene ring nitrogen atom and a chloride ion to give an elongated rhombic octahedral coordination sphere. The phosphazene ring atoms remain virtually coplanar in all three structures as a consequence of the phenoxy-hinge, which links the pyridine pendant donors to the cyclotriphosphazene platform, allowing the formation of six-membered chelate rings. The spectroscopic (mass spectral, EPR and electronic) and magnetic properties of the complexes are discussed. The EPR and variable temperature magnetic susceptibility results for the dicopper complex, [(CuCl(2))(2)(MeL)], point to a very weak electronic interaction between the metal atoms.     

Acid digestion of geological and environmental samples using open-vessel focused microwave digestion

The application of open vessel focused microwave acid digestion is described for the preparation of geological and environmental samples for analysis using inductively coupled plasma-mass spectrometry (ICP-MS). The method is compared to conventional closed-vessel high pressure methods which are limited in the use of HF to break down silicates. Open-vessel acid digestion more conveniently enables the use of HF to remove Si from geological and plant samples as volatile SiF4, as well as evaporation-to-dryness and sequential acid addition during the procedure. Rock reference materials (G-2 granite, MRG-1 gabbros, SY-2 syenite, JA-1 andesite, and JB-2 and SRM-688 basalts) and plant reference materials (BCR and IAEA lichens, peach leaves, apple leaves, Durham wheat flour, and pine needles) were digested with results comparable to conventional hotplate digestion. The microwave digestion method gave poor results for granitic samples containing refractory minerals, however fusion was the preferred method of preparation for these samples. Sample preparation time was reduced from several days, using conventional hotplate digestion method, to one hour per sample using our microwave method.     

Energy migration in novel pH-triggered self-assembled beta-sheet ribbons

Energy migration between tryptophan residues has been experimentally demonstrated in self-assembled peptide tapes. Each peptide contains 11 amino acids with a Trp at position 6. The peptide self-assembly is pH-sensitive and forms amphiphilic tapes, which further stack in ribbons (double tapes) and fibrils in water depending on the concentration. Fluorescence spectra, quenching, and anisotropy experiments showed that when the pH is lowered from 9 to 2, the peptide self-assembly buries the tryptophan in a hydrophobic and restricted environment in the interior of stable ribbons as expected on the basis of the peptide design. These fluorescence data support directly and for the first time the presence of such ribbons which are characterized by a highly packed and stable hydrophobic interior. In common with Trp in many proteins, fluorescence lifetimes are nonexponential, but the average lifetime is shorter at low pH, possibly due to quenching with neighboring Phe residues. Unexpectedly, time-resolved fluorescence anisotropy does not change significantly with self-assembly when in water. In highly viscous sucrose-water mixtures, the anisotropy decay at low pH was largely unchanged compared to that in water, whereas at high pH, the anisotropy decay increased significantly. We concluded that depolarization at low pH was not due to rotational diffusion but mainly due to energy migration between adjacent tryptophan residues. This was supported by a master equation kinetic model of Trp-Trp energy migration, which showed that the simulated and experimental results are in good agreement, although on average only three Trp residues were visited before emission.     

Structure and synthesis of physoperuvine: x-ray crystal and molecular structures of the n-benzoyl derivatives of (±)-3- and (+)-4-methylaminocycloheptanone

Single-crystal X-ray analyses have defined the structures and solid-state conformations of (±)-N-benzoyl-3-methylaminocycloheptanone [(±)-$\text{3}$]and (+)-N-benzoyl-4-methylaminocycloheptanone [(±)$\text{4}$]. Resolution of (±)-[4- methylaminocycloheptanone α 1-hydroxytropane]to yield the (+)-enantiomer. Identical in all respects with the free base from natural (+)-physoperuvine, was achieved via the di-p-toluoyl-(+)-tartrate salt.     

Synthesis of substituted 3-amino[6,5-b]triazinoindoles

4-[(9-Methyl-as-triazino[6,5-b]indol-3-yl)amino]-2-methyl-2-butanol ( 13 ) and the corresponding 2-methyl-3-imino derivative 12 were synthesized and tested in vitro against Rhino 2 virus. The two compounds were more active than the known triazino[5,6-b]indole 4 . 2,9-Dimethyl-3-methoxy-9H-as-triazino[6,5-b]indolium tosylate ( 21 ) and the related 3-methylthio compound 9 were prepared. Quaternary 21 formed a pseudo base, 22a , whereas quaternary 9 did not form a pseudo base.     

PROPERTIES OF THE ULTRAVIOLET-LIGHT-MEDIATED BINDING OF BOVINE SERUM ALBUMIN TO DNA*

Abstract— The binding of DNA to protein mediated by U V (254 nm) radiation has been investigated using binding of the complex to Millipore membrane filters as an assay technique. The reaction proceeds through an activated protein intermediate which then reacts with the DNA. The activated protein has a half-life of about 75 min at 0°C and about 18 min at 37°C. Short wavelengths are more efficient in forming the complex than wavelengths in the 250–280 nm range. N-ethyl maleimide treatment of protein before irradiation markedly inhibits the reaction.     

The [2 + 4] Diels-Alder cycloadditon product of a probable dialuminene,Ar'AlAlAr' (Ar' = C(6)H(3)- 2,6-dipp(2); dipp = C(6)H(3)-2,6-Pr(i)(2)), with toluene

Reduction of Ar'AlI2 (Ar' = Ar'= C6H3-2,6-Dipp2; Dipp = C6H3-2,6-Pri2) with KC8 in diethyl ether most probably affords the first "dialuminene", Ar'AlAlAr'; it was characterized by its reaction with toluene which yielded a [2 + 4] cycloaddition product incorporating the Ar'AlAlAr' unit.     

Quantum chemical modeling for 157 nm photolithography

In its continuing quest for smaller length scales, the electronics industry plans to introduce 157 nm as the next lithographic wavelength. Accordingly, there is a pressing need to develop photoresists that are more transparent, and pellicles that are both more transparent and more durable. With the advent and popularization of time-dependent density functional theory (TD-DFT), we now have a practical quantum chemical method for calculating excitation energies and transition moments in the vacuum ultraviolet (VUV) which can greatly assist in the scouting of highly transparent materials. We have performed TD-DFT calculations for a broad variety of fluorinated molecules and we will report calculated VUV photoabsorption spectra for a large family of model fluorohexanes. These calculations, which span a range from 1-fluorohexane to CH₃CF₂CF₂CF₂CF₂CH₃, illustrate some of the principles one may use to design low absorption polymeric materials.     

Cluster Build-up Reactions using Di-gold Cationic Fragments: Synthesis and Structural Characterization of [Os7(CO)19(Au2dppm)]

The reaction of the di-gold cation [Au₂(dppx)]²⁺ with the heptanuclear cluster dianion [Os₇(CO)₂₀]^2– affords the mixed metal cluster [Os₇(CO)₂₀{Au₂(dppx)}] (x=m (1), e (2), b (3)). On standing, in solution, this complex undergoes decarbonylation to give the cluster [Os₇(CO)₁₉{Au₂(dppx)}] (x=m (4), e (5), b (6)). The complexes have been characterised spectroscopically, and an X-ray structure determination of the dppm derivative shows that it contains a metal core based on an Os₇ edge-bridged bicapped tetrahedron with the two ₃-Au atoms capping adjacent triangular Os₃ faces of the central tetrahedron. In an analogous reaction, the carbido anion [Os₇(H)C(CO)₁₉]^– affords the neutral cluster [Os₇C(CO)₁₉{Au₂(dppm)}] (7) when treated with [Au₂(dppm)]²⁺ in the presence of base.