Ruthenium‐catalyzed formal alkyl group transfer: Synthesis of quinolines from nitroarenes and alkylammonium halides

Nitroarenes are reductively cyclized with an array of tetraalkylammonium halides and trialkylarnmonium chlorides in the presence of a catalytic amount of a ruthenium catalyst along with tin(II) chloride dihydrate at 180° to afford the corresponding quinolines in moderate to good yields. The addition of tin(II) chloride dihydrate is necessary for the effective formation of quinolines and toluene is the solvent of choice. A reaction pathway involving initial reduction of nitroarenes to anilines and conversion of alkylammonium halides to alkylamines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heteroannulation is proposed for this catalytic process.     

Kinetics and mechanism of benzylamine additions to ethyl alpha-acetyl-beta-phenylacrylates in acetonitrile

Kinetic studies of the addition of benzylamines to a noncyclic dicarbonyl group activated olefin, ethyl alpha-acetyl-beta-phenylacrylate (EAP), in acetonitrile at 25.0 degrees C are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the Calpha-N and Cbeta-H bonds through a four-center hydrogen bonded transition state.The kinetic isotope effects (kH/kD > 1.0) measured with deuterated benzylamines (XC6H4CH2ND2) increase with a stronger electron acceptor substituent (deltasigmaX > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4), but is in contrast to those for other (noncarbonyl) group activated series (5-9). For the dicarbonyl series, the reactivity-selectivity principle (RSP) holds, but for others the anti-RSP applies. These are interpreted to indicate an insignificant imbalance for the former, but substantial lag in the resonance delocalization in the transition state for the latter series.     

Highly efficient Pd-catalyzed carbonylative cross-coupling reactions with tetraorganoindates

Tetraorganoindates, which were prepared easily from the reaction of 1 equiv of InCl(3) with 4 equiv of organometallics, could be employed as effective nucleophilic cross-coupling partners in Pd-catalyzed carbonylative cross-coupling reactions with a variety of organic electrophiles. The present method gave unsymmetrical ketones and 1,4-diacylbenzenes in good yields with highly efficient transfer of almost all the organic groups attached to the indium under a carbon monoxide atmosphere in THF at 60 degrees C.     

Application of Arene-Ruthenium Chemistry to a Formal Total Synthesis of OF 4949 III

A convergent formal total synthesis of OF 4949 III is described. Arene-ruthenium chemistry was used in the construction of the diaryl ether linkage in high yield, and cycloamidation under high dilution conditions (0.005 M) was achieved using DPPA as coupling reagent. SmI(2) was used to reductively remove the 2-iodoethyl ester protecting group in the presence of DMPU or HMPA.     

Catalysis in supercritical CO2 using dendrimer-encapsulated palladium nanoparticles

Dendrimer-encapsulated nanoparticles are shown to be versatile catalysts for both the hydrogenation of styrene and Heck heterocoupling of iodobenzene and methacrylate in supercritical CO2 (scCO2).     

Molecular cloning and expression of an endo-β-1,4-d-glucanase I (avicelase I) gene from Bacillus cellulyticus K-12 and characterization of the recombinant enzyme

Bacillus cellulyticus K-12 Avicelase (Avicelase I; EC 3.2.1.4) gene (ace A) has been cloned in Escherichia coli by using the vector pT7T3U19 and HindIII-HindIII libraries of the chromosomal inserts. The libraries were screened for the expression of avicelase by monitoring the immunoreaction of the antiavicelase (immunoscreening). Positive clones (Ac-3, Ac-5, and Ac-7) contained the identical 3.5-kb HindIII fragment as determined by restriction mapping and Southern hybridization, and expressed avicelase efficiently and constitutively using its own promoter in the heterologous host. From the immunoblotting analysis, a polypeptide that showed a carboxymethylcellulase (CMCase) activity with an M _r , of 64,000 was detected. The recombinant endo 1,4-β- _d -glucanase I was purified to homogeneity from an intracellular fraction of E. coli by DEAE-Toyopearl M650, Phenyl Toyoperal M650, and TSK gel HW50S chromatography. The enzyme had a monomeric structure, its relative molecular mass being 65 kDa by gel filtration and 64 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The pI was 5.3 and the optimal pH was 4.6, and the enzyme was stable at pH 4.0–10.5. The enzyme had a temperature optimum of 50°C and was stable at 55°C for 48 h, and retained approx 20% of its activity after 30 min at 70°C. It showed high activity toward carboxymethylcellulose (CMC) as well as p-nitrophenyl-β-d-cellobioside, 4-methylumbelliferyl cellobioside, Avicel, filter paper, and some cellooligosaccharides. K _m values for CMC and Avicel were 7.6 and 85.2 mg/mL, respectively, whereas V _max values were 201 and 9.2 μmol · min⁻¹ · mg⁻¹, respectively. Cellotetraose (G4) was preferentially cleaved into cellobiose (G2) and cellopentaose (G5) was cleaved into G2 + cellotriose (G3), whereas cellohexaose (G6) was cleaved into G4 + G2 and, to a lesser extent, into G3 + G3. G3 was not cleaved at all. G2 was the main product of Avicel hydrolysis. G2 inhibited whereas Mg⁺⁺ stimulated the activity of CMCase and Avicelase. Hydrolysis of CMC took place with a rapid decrease in viscosity but a slow liberation of reducing sugars. Based on these results, it appeared that the cellulase should be regarded as endo type, although it hydrolyzed Avicel.     

The influences of solid-phase organic constituents on the partition of aliphatic and aromatic organic contaminants

The influence of natural organic matter (NOM) constituents on contaminant distribution coefficients was evaluated by determining the Koc values of aromatic and aliphatic organic compounds (solutes) with clays modified with both aromatic- and aliphatic-rich organic constituents. The studied compounds consisted of naphthalene, phenanthrene, n-pentane, and 2,3,4-trimethylmethane; the solid samples comprised two clays with little organic content, kaolinite and Ca-montmorillonite. Two aliphatic surfactants and three aromatic dyes, sorbed to the clays, served as reference NOM constituents. For solutes of comparable water solubilities, the organic-carbon normalized distribution coefficients (Koc) of the aliphatic solutes between sorbed aliphatic organic matter and aqueous solution slightly exceed those of the aromatic solutes. By contrast, the aromatic solutes exhibited higher Koc values than did the aliphatic compounds with sorbed aromatic-rich organic matter. The difference in Koc values could be attributed to either comparable solubility parameters or the difference in the chemical structure between nonionic organic solutes and specific components of the simulated NOM. The much higher Koc values observed for the aromatic solutes indicate that the NOM composition is a major factor determining the NOC environmental distribution.     

Amperometric Glucose Biosensor Based on Glucose Oxidase Encapsulated in Carbon Nanotube–Titania–Nafion Composite Film on Platinized Glassy Carbon Electrode

A highly sensitive and selective glucose biosensor has been developed based on immobilization of glucose oxidase within mesoporous carbon nanotube–titania–Nafion composite film coated on a platinized glassy carbon electrode. Synergistic electrocatalytic activity of carbon nanotubes and electrodeposited platinum nanoparticles on electrode surface resulted in an efficient reduction of hydrogen peroxide, allowing the sensitive and selective quantitation of glucose by the direct reduction of enzymatically‐liberated hydrogen peroxide at ?0.1 V versus Ag/AgCl (3 M NaCl) without a mediator. The present biosensor responded linearly to glucose in the wide concentration range from 5.0×10^?5 to 5.0×10^?3 M with a good sensitivity of 154 mA M^?1cm^?2. Due to the mesoporous nature of CNT–titania–Nafion composite film, the present biosensor exhibited very fast response time within 2 s. In addition, the present biosensor did not show any interference from large excess of ascorbic acid and uric acid.     

Chiral resolution of diphenylalanine by high-performance liquid chromatography on a crown-ether-based chiral stationary phase and by NMR spectroscopy

Summary The enantiomers of diphenylalanine (DPA) were well separated by chiral HPLC and NMR spectroscopy on the chiral stationary phase (CSP) derived from (18-crown-6)-2,3,11,12-tetracarboxylic acid (18-C-6-TA). The chromatographic parameters such as separation factors and retention times were greatly influenced by the mobile phase conditions. The (+)-18-C-6-TA used in the CSP was also employed as a chiral solvating agent for the enantiodiscrimination of the DPA enantiomers by NMR spectroscopy. The proton of the DPA analyte showing the chemical shift nonequivalences was used in determining the enantiomeric composition of the analyte.