Synthesis of poly-substituted nitrobenzene derivatives from Baylis-Hillman adducts via [3+3] annulation protocol

Poly-substituted nitrobenzenes were synthesized from Baylis-Hillman adducts via the [3+3] annulation strategy as the key step. 1,3-Dinitroalkanes served as the 1,3-dinucleophilic component and the Baylis-Hillman acetates as a 1,3-dielectrophilic part.     

拟线性椭圆变分不等式的障碍最优控制问题

对拟线性椭圆变分不等式的障碍最优控制问题(即以障碍为控制变量)进行了研究．指标泛函为Lagrange型,其中含有控制变量二阶导数的p次幂,这使得最优性条件的推导颇为不易．对所考虑的问题给出了最优控制的存在性定理以及必要条件．     

正电子产生靶上初级电子束半径的最小化研究

为获得尽可能高的正电子(e⁺)产额,严格控制初级电子(e^－)束在e⁺产生靶上的束半径是至关重要的.首先分析了使e^－束半径增大的各因素和对这些因素的制约;然后以北京正负电子对撞机(BEPC)的正电子源为例,给出了束半径的实测值和计算值的比较,以具体说明这些因素的影响;最后讨论了北京正负电子对撞机二期工程(BEPC-Ⅱ)的相应优化设计研究,提出了获得靶上最小束半径的若干途径.     

Cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia for chiral separation in high performance liquid chromatography.

Porous zirconia particles are very robust material and have received considerable attention as a stationary phase support for HPLC. We prepared cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia (CDMPCCZ) as a chiral stationary phase (CSP) for separation of enantiomers of a set of 14 racemic compounds in normal phase (NP) and reversed-phase (RP) liquid chromatography. Retention and enantioselectivity on CDMPCCZ were compared to those on CDMPC-coated zirconia (CDMPCZ) to see how the change in immobilization method of the chiral selector affects the retention and chiral selectivity. In NPLC, retention was longer and the number of resolved racemates was smaller on CDMPCCZ than on CDMPCZ. However, chiral selectivity factors for some resolved racemates were better on CDMPCCZ than on CDMPCZ. The longer retention on CDMPCCZ is likely due to strong, non-chiral discriminating interactions with the carbon layer on CDMPCZ. In RPLC only two racemates were resolved on CDMPCCZ, but retention times were shorter than, and resolutions were comparable to, those in NPLC, indicating a potential for improving chromatographic performance of the CDMPCCZ column in RPLC with optimized column preparation and separation conditions.     

二维光电位置敏感器件的非线性修正

根据二维光电位置敏感器件 (PSD)的工作原理 ,分析了影响PSD线性度的主要因素 ,提出了一种用神经网络对PSD进行非线性修正的方法。以PSD的输入输出数据对作为样本训练的神经网络 ,利用神经网络所具有地能够以任意精度逼近非线性函数的能力 ,实现PSD的输出与实际光点位置之间的映射 ,在神经网络的输出端得到线性响应。该方法的优点是不需要很大的数据存储量即可得到很好的修正效果。结果表明 ,修正后的PSD能在较宽的位置范围内输出高线性度的信号     

Temperature effect on deposition rate of silicon nitride films

Temperature effects on deposition rate of silicon nitride films were characterized by building a neural network prediction model. The silicon nitride films were deposited by using a plasma enhanced chemical vapor deposition system and process parameter effects were systematically characterized by 2⁶⁻¹ fractional factorial experiment. The process parameters involved include a radio frequency power, pressure, temperature, SiH₄, N₂, and NH₃ flow rates. The prediction performance of generalized regression neural network was drastically improved by optimizing multi-valued training factors using a genetic algorithm. Several 3D plots were generated to investigate parameter effects at various temperatures. Predicted variations were experimentally validated. The temperature effect on the deposition rate was a complex function of parameters but N₂ flow rate. Larger decreases in the deposition rate with the temperature were only noticed at lower SiH₄ (or higher NH₃) flow rates. Typical effects of SiH₄ or NH₃ flow rate were only observed at higher or lower temperatures. A comparison with the refractive index model facilitated a selective choice of either SiH₄ or NH₃ for process optimization.     

Synchronization of Genesio chaotic system via backstepping approach

Backstepping design is proposed for synchronization of Genesio chaotic system. Firstly, the control problem for the chaos synchronization of nominal Genesio systems without unknown parameters is considered. Next, an adaptive backstepping control law is derived to make the error signals between drive Genesio system and response Genesio system with an uncertain parameter asymptotically synchronized. Finally, the approach is extended to the synchronization problem for the system with three unknown parameters. The stability analysis in this article is proved by using a well-known Lyapunov stability theorem. Note that the approach provided here needs only a single controller to realize the synchronization. Two numerical simulations are presented to show the effectiveness of the proposed chaos synchronization scheme.     

In situ observations of domain wall motion in Mn–Zn and Ni–Zn ferrites by Lorentz microscopy and electron holography

Domain wall motion in Mn–Zn and Ni–Zn ferrites with applied magnetic fields is investigated by in situ observations with Lorentz microscopy and electron holography. It is found that both Mn–Zn and Ni–Zn ferrites have a mean grain size of approximately 10 μm and several pores with sizes ranging from 0.2 to 1.1 μm. In situ observations by Lorentz microscopy with an applied magnetic field reveals that in Mn–Zn ferrite, the domain walls move easily across the grain boundary, while in Ni–Zn ferrite, the domain walls move along the grain boundary but are pinned at the grain boundary and pores. From in situ observations of Ni–Zn ferrite by electron holography, it is clarified that domain wall pinning at the grain boundary retards a sensitive increase in magnetic flux parallel to the applied field direction, which is considered to result in high hysteresis loss.     

一类二元相关威布尔分布的可靠性问题

本文考虑生存函数为${\ol{F}(x_{1},x_{2})}=\exp\{-[(x_{1}^{1/\alpha}/\theta_{1})^{1/\delta}+(x_{2}^{1/\alpha}/\theta_{2})^{1/\delta}]^{\delta}\},\;x_{i}>0,\;\alpha>0$, $1\geq\delta>0,\;\theta_{i}>0\;(i=1,2)$的二元威布尔分布的两种可靠性问题, 提出可靠度$\pr$的估计并讨论了它们的渐近性, 最后还作了模拟计算.