Terminal anhydride functionalization of polystyrene

Polystyrene chains with terminal anhydride groups were synthesized by direct chain transfer reaction between poly(styryl) lithium and trimellitic anhydride chloride (TMAC) and by the alkoxy-de-halogenation reaction between TMAC and hydroxy terminated polystyrene. Pyridine was used as a catalyst for these nucleophilic substitution reactions. For the direct reaction a poly(styryl) lithium with M?_n ～ 1000 (a low MW was used for characterization purposes) was prepared in an argon purged reactor and then introduced into an excess of trimellitic anhydride chloride. Due to the nature of our reaction system, the molecular weight distributions obtained were broader than those possible using more stringent high vacuum techniques. Hydroxy terminated polystyrenes with M?_n = 3,000 and 13,000 obtained elsewhere were used for the indirect addition of terminal anhydride groups. ¹H-NMR spectroscopy, gel permeation chromatography (GPC), and FTIR spectroscopy were used to characterize the reaction products. A maximum yield of 61% for the direct functionalization route and 85% for the indirect functionalization route using hydroxyl terminated polystyrene were achieved. The higher yield of the indirect method seems to be the result of the relatively mild reactivity of the hydroxyl group.     

Isothermal vapor–liquid equilibrium at 303.15 K and excess molar volumes at 298.15 K for the ternary system of propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane and its binary sub-systems

Isothermal vapor–liquid equilibrium data determined by the static method at 303.15 K are reported for the binary systems propyl vinyl ether + 1-propanol, 1-propanol + 2,2,4-trimethylpentane and propyl vinyl ether + 2,2,4-trimethylpentane and also for the ternary system propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane. Additionally, new excess volume data are reported for the same systems at 298.15 K. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and excess molar volume data were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Analysis of an ancient bronze statue by external beam pixe

A quantitative analysis of an ancient Buddha statue was performed by external beam Proton Induced X-ray Emission for the purpose of identifying its originality. It is shown how the PIXE method can be applied for archeological study. The elemental composition of the statue is compared with that of several samples with definite ages. The experiment was performed by extracting 2.4 MeV proton beam through a 2 mm diameter collimator and 7.6 m kapton foil to the He atmosphere. X-rays were measured by a Si(Li) detector. The analysed elements were Fe, Cu, Ag, Au and Hg for gold coating and Fe, Ni, Cu, Zn, As, Ag, Sn, Au, Pb and Bi for bronze body.     

Advances in coupling a commercial total organic carbon analyser with an isotope ratio mass spectrometer to determine the isotopic signal of the total dissolved nitrogen pool

A new method has been developed to analyse 15N of the total dissolved nitrogen (TDN) pool. The method operates on a commercial total organic carbon (TOC) analyser coupled to an elemental analyser/isotope ratio mass spectrometer (EA-IRMS). Nitrogen compounds are combusted to nitric oxide (NO) and nitrogen dioxide (NO2) by high-temperature catalytic oxidation (HTCO), after which the NOx gas is transferred to an EA-IRMS for isotopic nitrogen analysis. The system is described, including five modifications of the system in order to overcome analytical problems. First, flow paths were modified to run both systems on helium as carrier gas, while complete sample oxidation was maintained. Secondly, the catalyst structure was adapted to allow high injection volumes at the given backpressures delivered by the EA system. Thirdly, we installed a Permapure dehumidification system as the standard Peltier element did not satisfy dehumidification requirements. Finally, we prevented the inflow of atmospheric nitrogen into the system. In a final stage, we are planning to automate the coupled system in order to run a continuous batch of up to 60 samples. We have obtained satisfactory results on the accuracy and precision of 180+/-1 per thousand potassium nitrate samples (IAEA, USGS-32). Running a batch of five samples resulted in a mean isotopic value of 178.8 per thousand with a standard deviation of 2.8 per thousand. Some important issues could not yet be addressed here, and will have to be evaluated once the system is running on a continuous base. However, the results appear promising and this system has the potential to become a method for TD15N analysis. An appropriate TD15N analysis method might open new challenges in aquatic and terrestrial ecosystem nitrogen studies, including a more comprehensive study of the dissolved organic nitrogen pool.     

Stacking sequence effect of aramid–UHMPE hybrid composites by flexural test method: MATERIAL PROPERTIES

Aramid fibre–ultra-high modulus polyethylene (UHMPE) fibre interply hybrid composites were fabricated with changes in the stacking sequence. The flexural strength and modulus of hybrid composites were measured in order to investigate the effect of stacking sequence. Scanning electron microscopy (SEM) was used to examine the fracture surface of interply hybrid composites. When aramid fibre was at the compressive side and dispersion extent of fibers was small, the higher flexural strength and positive hybrid effect were observed. In addition, the different stacking sequence resulted in a change in flexural failure mechanism which had an effect on the flexural strength. As the dispersion extent of fibers decreased, the introduction of cohesive failure in aramid–aramid interface and PE–PE interface improved the flexural strength of hybrid composites.     

The measurement of rates of initiation in the thermal polymerization of styrene

The thermal initiation of the polymerization of styrene has been studied at temperatures from 60–140°C using DPPH as a free radical scavenger. Rates of free radical formation, measured by the decrease in absorbance at 525 nm, are about seven times greater than those obtained from inhibition period measurements. The difference is probably due to the much greater reactivity of trinitrobenzene derivatives towards diradicals from styrene than towards styryl monoradicals. This view is supported by the different behaviour of the AIBN initiated polymerization of styrene in the presence of DPPH. The thermal initiation process has a low efficiency of initiation and the activation energy is 121 kJ/mole. The results strongly support the diradical mechanism for the thermal initiation of styrene polymerization.     

Phagocytosis of serum- and IgG-opsonized zymosan particles induces apoptosis through superoxide but not nitric oxide in macrophage J774A.1

Phagocytosis of serum- and IgG-opsonized zymosan (SOZ and IOZ, respectively) particles into J774A.1 macrophages induced apoptosis of the cells, accompanied by the expression of p21(WAF1), one of cyclin-dependent protein kinase (CDK) inhibitors. Furthermore, phagocytosis of SOZ and IOZ particles into macophages induced superoxide formation. Tat-superoxide dismutase (SOD), which is readily transduced into the cells using Tat-domain, protected the cells from the apoptosis induced by phagocytosis of SOZ and IOZ particles. lipopolysaccharide (LPS) /interferon-gamma (IFN-gamma) also caused the apoptosis of the cells. However, Tat-SOD could not protect the cells from LPS/IFN-gamma induced apoptosis, suggesting that apoptosis mechanisms involved are different from each other. In the present study, we determined the amounts of nitric oxide (NO) produced by SOZ, IOZ, and LPS/IFN-gamma, and found that SOZ and IOZ did not induce the generation of NO in macrophages, whereas LPS/ IFN-gamma did. The apoptosis due to phagocytosis was accompanied with the release of cytochrome c from mitochondrial membrane to cytosolic fraction. Furthermore, SOZ and IOZ induced the cleavage of procasapase-3 (35 kDa) to give rise to an active caspase-3 (20 kDa), which was blocked by Tat- SOD but not by 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl 3-oxide (PTIO), a scavenger of NO. On the other hand, LPS/IFN-gamma caused the activation of procaspase-3, which was blocked by PTIO but not by Tat-SOD. Taken together, phagocytosis of SOZ and IOZ particles induced apoptosis through superoxide but not NO in macrophages, accompanied with the release of cytochrome c and the activation of caspase-3.     

A highly stable quadruply hydrogen-bonded heterocomplex useful for supramolecular polymer blends

The butyl urea of guanosine (UG) presents an ADDA hydrogen-bonding array that is complementary to the DAAD array of 2,7-diamido-1,8-naphthyridine (DAN). The stability of the DAN.UG complex was measured by fluorimetry using the fluorescence resonance energy transfer (FRET) from the naphthyridine ring to a coumarin 343 moiety linked covalently to the UG unit. The quadruply hydrogen-bonded complex is extremely stable with a measured association constant, Kassoc, of 3 x 108 M-1. Unlike related hydrogen-bonding modules, the guanosine urea, UG, contains a relatively fixed tautomeric form and only weakly self-associates (Kdimer = ca. 200 M-1). The DAN unit was linked to a styrene-based monomer and copolymerized with styrene to form a polymer (PS-DAN) containing a controlled number of the DAAD recognition units. Likewise, a methacrylate monomer containing the UG unit was copolymerized with butyl methacrylate to form a polymer (PBMA-UG). Blends formed from PS-DAN and PBMA-UG were characterized by DSC, SEC, and viscometry. The importance of selective heterocomplexation and weak self-association in forming the blended networks was demonstrated by using a ureidopyrimidinone (UPy) unit, which also forms strong heterocomplexes with DAN but is able to strongly self-associate.