Amperometric Glucose Biosensor Based on Glucose Oxidase Encapsulated in Carbon Nanotube–Titania–Nafion Composite Film on Platinized Glassy Carbon Electrode

A highly sensitive and selective glucose biosensor has been developed based on immobilization of glucose oxidase within mesoporous carbon nanotube–titania–Nafion composite film coated on a platinized glassy carbon electrode. Synergistic electrocatalytic activity of carbon nanotubes and electrodeposited platinum nanoparticles on electrode surface resulted in an efficient reduction of hydrogen peroxide, allowing the sensitive and selective quantitation of glucose by the direct reduction of enzymatically‐liberated hydrogen peroxide at ?0.1 V versus Ag/AgCl (3 M NaCl) without a mediator. The present biosensor responded linearly to glucose in the wide concentration range from 5.0×10^?5 to 5.0×10^?3 M with a good sensitivity of 154 mA M^?1cm^?2. Due to the mesoporous nature of CNT–titania–Nafion composite film, the present biosensor exhibited very fast response time within 2 s. In addition, the present biosensor did not show any interference from large excess of ascorbic acid and uric acid.     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Stereodivergent and regioselective synthesis of 3,4-cis- and 3,4-trans-pyrrolidinediols from alpha-amino acids

[reaction: see text] Highly stereodivergent Woodward-Prevost reaction applied to iodoacetates derived from homochiral alpha-amino acids afforded enantiopure 3,4-cis- and 3,4-trans-pyrrolidinediol derivatives, with control over the protecting group, allowing for differential protection.     

Terminal anhydride functionalization of polystyrene

Polystyrene chains with terminal anhydride groups were synthesized by direct chain transfer reaction between poly(styryl) lithium and trimellitic anhydride chloride (TMAC) and by the alkoxy-de-halogenation reaction between TMAC and hydroxy terminated polystyrene. Pyridine was used as a catalyst for these nucleophilic substitution reactions. For the direct reaction a poly(styryl) lithium with M?_n ～ 1000 (a low MW was used for characterization purposes) was prepared in an argon purged reactor and then introduced into an excess of trimellitic anhydride chloride. Due to the nature of our reaction system, the molecular weight distributions obtained were broader than those possible using more stringent high vacuum techniques. Hydroxy terminated polystyrenes with M?_n = 3,000 and 13,000 obtained elsewhere were used for the indirect addition of terminal anhydride groups. ¹H-NMR spectroscopy, gel permeation chromatography (GPC), and FTIR spectroscopy were used to characterize the reaction products. A maximum yield of 61% for the direct functionalization route and 85% for the indirect functionalization route using hydroxyl terminated polystyrene were achieved. The higher yield of the indirect method seems to be the result of the relatively mild reactivity of the hydroxyl group.     

Electronic structure and field emission of multiwalled carbon nanotubes depending on growth temperature

The electronic structure of multiwalled carbon nanotubes (CNTs) has been investigated, depending on the growth temperature, using synchrotron X-ray photoelectron spectroscopy (XPS) and field emission measurements. The vertically aligned CNTs are grown via pyrolysis of ferrocene and acetylene in a broad temperature range 600-1000 degrees C. The CNTs have a cylindrical structure with a uniform diameter of 20 nm. As growth temperature increases, due to an improved crystallinity of the graphitic sheets, the width of the XPS C 1s peak becomes narrower and the intensity of the valence band increases. Field emission from the as-grown CNTs exhibits a large enhancement of current density with growth temperature, strongly correlated with the electronic structure revealed by XPS.     

Isothermal vapor–liquid equilibrium at 303.15 K and excess molar volumes at 298.15 K for the ternary system of propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane and its binary sub-systems

Isothermal vapor–liquid equilibrium data determined by the static method at 303.15 K are reported for the binary systems propyl vinyl ether + 1-propanol, 1-propanol + 2,2,4-trimethylpentane and propyl vinyl ether + 2,2,4-trimethylpentane and also for the ternary system propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane. Additionally, new excess volume data are reported for the same systems at 298.15 K. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and excess molar volume data were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Analysis of an ancient bronze statue by external beam pixe

A quantitative analysis of an ancient Buddha statue was performed by external beam Proton Induced X-ray Emission for the purpose of identifying its originality. It is shown how the PIXE method can be applied for archeological study. The elemental composition of the statue is compared with that of several samples with definite ages. The experiment was performed by extracting 2.4 MeV proton beam through a 2 mm diameter collimator and 7.6 m kapton foil to the He atmosphere. X-rays were measured by a Si(Li) detector. The analysed elements were Fe, Cu, Ag, Au and Hg for gold coating and Fe, Ni, Cu, Zn, As, Ag, Sn, Au, Pb and Bi for bronze body.