Electrospun poly(l‐lactide) nanofibers coated with mineral trioxide aggregate enhance odontogenic differentiation of dental pulp stem cells

A combination of bioceramics and nanofibrous scaffolds holds promising potential for inducing of mineralization in connective tissues. The aim of the present study was to investigate the attachment, proliferation and odontogenic differentiation of dental pulp stem cells (DPSC) on poly(l ‐lactide) (PLLA) nanofibers coated with mineral trioxide aggregate (MTA). Polymeric scaffolds were fabricated via the electrospinning method and their surface was coated with MTA. DPSC were isolated from dental pulp and their biological behavior was evaluated on scaffolds and the control group using MTT assay. Alkaline phosphatase (ALP) activity, biomineralization and the expression of odontogenic genes were analyzed during odontogenic differentiation. Isolated DPSC showed spindle‐shaped morphology with multi‐lineage differentiation potential and were positive for CD73, CD90 and CD105. MTA‐coated PLLA (PLLA/MTA) exhibited nanofibrous structure with average fiber diameter of 756 ± 157 nm and interconnected pores and also suitable mechanical properties. Similar to MTA, these scaffolds were shown to be biocompatible and to support the attachment and proliferation of DPSC. ALP activity transiently peaked on day 14 and was significantly higher in PLLA/MTA scaffolds than in the control groups. In addition, increasing biomineralization was observed in all groups with a higher amount in PLLA/MTA. Odontogenic‐related genes, DSPP and collagen type I showed a higher expression in PLLA/MTA on days 21 and 14, respectively. Taken together, MTA/PLLA electrospun nanofibers enhanced the odontogenic differentiation of DPSC and showed the desired characteristics of a pulp capping material.     

Effects of relative humidity and CO(g) on the O3-initiated oxidation reaction of Hg0(g): kinetic & product studies

Ozone is assumed to be the predominant tropospheric oxidant of gaseous elemental mercury (Hg0(g)), defining mercury global atmospheric lifetime. In this study we have examined the effects of two atmospherically relevant polar compounds, H2O(g) and CO(g), on the absolute rate coefficient of the O3-initiated oxidation of Hg0(g), at 296 +/- 2 K using gas chromatography coupled to mass spectrometry (GC-MS). In CO-added experiments, we observed a significant increase in the reaction rate that could be explained by pure gas-phase chemistry. In contrast, we found the apparent rate constant, k(net), varied with the surface-to-volume ratio (0.6 to 5.5 L flasks) in water-added experiments. We have observed small increases in k(net) for nonzero relative humidity, RH < 100%, but substantial increase at RH > or = 100%. Product studies were performed using mass spectrometry and high resolution transmission electron microscopy coupled to an electron dispersive spectrometer (HRTEM-EDS). Our results give evidence for enhanced chain growth of HgO(s) on a carbon grid at RH = 50%. A water/surface/ozone independent ozone oxidation rate is estimated to be (6.2 +/- (1.1; tsigma/ radicaln) x 10(-19) cm3 molecule(-1) s(-1). The total uncertainty associated with the ensemble of experiments amount to approximately < or = 20%. The atmospheric implications of our results and the effect of an added reaction partner in homogeneous and heterogeneous atmospheric chemistry will be discussed.     

Kinetics of the gas‐phase reactions of Cl atom with selected C2–C5 unsaturated hydrocarbons at 283 < T < 323 K

The reaction of Cl atoms with a series of C₂–C₅ unsaturated hydrocarbons has been investigated at atmospheric pressure of 760 Torr over the temperature range 283–323 K in air and N₂ diluents. The decay of the hydrocarbons was followed using a gas chromatograph with a flame ionization detector (GC‐FID), and the kinetic constants were determined using a relative rate technique with n‐hexane as a reference compound. The Cl atoms were generated by UV photolysis (λ ≥ 300 nm) of Cl₂ molecules. The following absolute rate constants (in units of 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, with errors representing ±2σ) for the reaction at 295 ± 2 K have been derived from the relative rate constants combined to the value 34.5 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for the Cl + n‐hexane reaction: ethene (9.3 ± 0.6), propyne (22.1 ± 0.3), propene (27.6 ± 0.6), 1‐butene (35.2 ± 0.7), and 1‐pentene (48.3 ± 0.8). The temperature dependence of the reactions can be expressed as simple Arrhenius expressions (in units of 10⁻¹¹ cm³ molecule⁻¹ s⁻¹): k_ethene = (0.39 ± 0.22) × 10⁻¹¹ exp{(226 ± 42)/T}, k_propyne = (4.1 ± 2.5) × 10⁻¹¹ exp{(118 ± 45)/T}, k_propene = (1.6 ± 1.8) × 10⁻¹¹ exp{(203 ± 79)/T}, k_1‐butene = (1.1 ± 1.3) × 10⁻¹¹ exp{(245 ± 90)/T}, and k_1‐pentene = (4.0 ± 2.2) × 10⁻¹¹ exp{(423 ± 68)/T}. The applicability of our results to tropospheric chemistry is discussed. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 478–484, 2000     

Decontamination of methylene blue from aqueous media using alginate-bonded polyacrylamide/carbon black nanocomposite hydrogel

This work synthesized the novel alginate (Alg) based nanocomposite hydrogel using the free radical polymerization method to remove methylene blue (MB) from the aqueous solution. The successful grafting of acrylamide (AAm) monomer onto the alginate backbone was confirmed by the FTIR test. Different carbon black (CB) nanoparticle levels (0–12.5 wt.%) were embedded in a hydrogel matrix to enhance the removal efficiency, and its optimum value was obtained at 7.5 wt.%. FTIR, TGA, BET, and SEM analyses were performed to characterize synthesized adsorbents. TGA results showed that Alg-g-poly(AAm)/CB nanocomposite hydrogel has a higher thermal stability than Alg-g-poly(AAm) hydrogel. SEM analysis showed that incorporating CB into Alg-g-poly(AAm) considerably enhances roughness and surface area. Also, a higher surface area of Alg-g-poly(AAm)/CB (2.5 m²/g) was confirmed by BET analysis. The removal efficiency of nanocomposite hydrogel at optimum conditions of pH 6, initial concentration 10 mg/L, temperature 25 °C, and contact time 60 min was calculated at 94.63%. The kinetic and isotherm data were best fitted to pseudo-second-order and Langmuir models. The monolayer adsorption capacity for Alg-g-poly(AAm) and Alg-g-poly(AAm)/CB were calculated at 22.77 and 24.56 mg/g, respectively, showing CB's effectiveness in improving MB adsorption. The thermodynamic study showed that the removal process of MB by both adsorbents is spontaneous and exothermic, and entropy decreases. The synthesized adsorbents showed a good performance in textile wastewater treatment. Finally, it can be concluded that the synthesized adsorbents can be successfully applied for wastewater treatment application.     

The gas-phase ozonolysis reaction of methylbutenol: A mechanistic study

The gas-phase ozonolysis reaction of methylbutenol through the Criegee mechanism is investigated. The initial reaction leads to a primary ozonide (POZ) formation with barriers in the range of 10–28 kJ mol⁻¹. The formation of 2-hydroxy-2-methyl-propanal (HMP) and formaldehyde-oxide is more favorable, by 10 kJ mol⁻¹, than the syn-CI and formaldehyde. The unimolecular dissociation of the more stable syn-CI via 1,5-H transfer into an epoxide is more favored than the epoxide and ³O₂ formation. The ester channel led to the formation of the acetone and formic acid favorably from the anti-CI. The hydration of the anti-CI with H₂O and (H₂O)₂ is significantly barrierless with a higher plausibility to the latter, and thus they may lead to the formation of peroxides and ultimately OH radicals, as well as airborne particulate matter. Reaction of anti-CI with water dimers enhances its atmospheric reactivity by a factor of 28 in reference to water monomers.     

Investigation of activation energies for dissociation of host‐guest complexes in the gas phase using low‐energy collision induced dissociation

A low‐energy collision induced dissociation (CID) (low‐energy CID) approach that can determine both activation energy and activation entropy has been used to evaluate gas‐phase binding energies of host‐guest (H‐G) complexes of a heteroditopic hemicryptophane cage host (Zn (II)@1) with a series of biologically relevant guests. In order to use this approach, preliminary calibration of the effective temperature of ions undergoing resonance excitation is required. This was accomplished by employing blackbody infrared radiative dissociation (BIRD) which allows direct measurement of activation parameters. Activation energies and pre‐exponential factors were evaluated for more than 10 H‐G complexes via the use of low‐energy CID. The relatively long residence time of the ions inside the linear ion trap (maximum of 60 s) allowed the study of dissociations with rates below 1 s^?1. This possibility, along with the large size of the investigated ions, ensures the fulfilment of rapid energy exchange (REX) conditions and, as a consequence, accurate application of the Arrhenius equation. Compared with the BIRD technique, low‐energy CID allows access to higher effective temperatures, thereby permitting one to probe more endothermic decomposition pathways. Based on the measured activation parameters, guests bearing a phosphate (―OPO₃^2?) functional group were found to bind more strongly with the encapsulating cage than those having a sulfonate (―SO₃^?) group; however, the latter ones make stronger bonds than those with a carboxylate (―CO₂^?) group. In addition, it was observed that the presence of trimethylammonium (―N(CH₃)₃⁺) or phenyl groups in the guest's structure improves the strength of H‐G interactions. The use of this technique is very straightforward, and it does not require any instrumental modifications. Thus, it can be applied to other H‐G chemistry studies where comparison of bond dissociation energies is of paramount importance.     

Fibroin-functionalized magnetic carbon nanotube as a green support for anchoring silver nanoparticles as a biocatalyst for A3 coupling reaction

Novel and powerful fibroin-functionalized magnetic carbon nanotube–supported silver nanoparticles (CNT–Fe₃O₄–fibroin–Ag) were successfully synthesized as a nontoxic and inexpensive biocatalyst. The structure of the organic–inorganic hybrid bionanocomposite was characterized by various techniques such as Fourier transform infrared spectroscopy, thermogravimetric analysis, energy-dispersive X-ray, field emission-scanning electron microscopy, transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry, atomic absorption spectroscopy, and inductively coupled plasma-optical emission spectrometry. Then, the catalytic activity of synthesized bionanocomposite was evaluated in the three-component A³ coupling reaction under solvent-free conditions with good to excellent yields. Several propargylamine derivatives were synthesized by the reaction of different aldehydes with amines and phenylacetylene. Biodegradability, biocompatibility, availability, easy synthesis, high stability, high-throughput, cost-effectiveness, and efficient magnetic separation are some advantages of this catalyst that make it economically justified and sustainable. Moreover, the catalyst can be recycled for several runs without appreciable loss in its catalytic activity.     

Magnetic nitrogen-doped carbon derived from silk cocoon biomass: a promising and sustainable support for copper

Research on Chemical Intermediates - In this study, a magnetic nitrogen-doped carbon-based copper (MNC-Cu) catalyst was fabricated so that natural silk cocoons undergo thermal processes and then...     

Magnetic carbon nanotube as a highly stable support for the heterogenization of InCl3 and its application in the synthesis of isochromeno[4,3-c]pyrazole-5(1H)-one derivatives

In the present study, a novel magnetically retrievable catalytic system involving indium nanoparticles on magnetic carbon nanotube (Fe₃O₄-CNT-In) was synthesized and characterized using various techniques, such as Fourier transform-infrared, thermogravimetric analysis, energy-dispersive X-ray analysis, vibrating-sample magnetometry1, X-ray diffraction, field emission-scanning electron microscopy and inductively coupled plasma-optical emission spectrometry. The catalytic activity of the synthesized nanocatalyst was evaluated in green synthesis of isochromeno[4,3-c]pyrazole-5(1H)-one derivatives from the reaction of ninhydrin and arylhydrazones under solvent-free conditions. The catalyst was magnetically separated from the reaction mixture using an external magnet and recovered for five cycles without an appreciable decrease in its catalytic efficiency. Performing the reactions in environmentally friendly and affordable conditions, the low catalyst percentage, high yield of products, short reaction times, large substrate scope and easy work-up are the merits of this protocol. Furthermore, four of the synthesized isochromeno[4,3-c]pyrazole-5(1H)-one derivatives are also new.     

Influence of aging temperature and Mg/Zr molar ratio on transformation of C2H6 to C2H4 over VOx catalyst supported on Mg–Zr nanocomposite

Research on Chemical Intermediates - To identify active and selective catalysts for oxidative dehydrogenation of ethane in presence of CO2, MgO–ZrO2 supports with varying amounts...