Synthesis and antifungal activities of 3,5-diphenyl-7-amino-[1,3]-thiazolo[3,2-a]pyrimidine-6-nitrile derivatives

A series of novel 3,7-diphenyl-7-amino[1,3]-thiazolo[3,2-a]pyrimidine-6-nitrile derivatives 3 were synthesized by refluxing 2-amino-4-phenyl-1,3-thiazole 1 and arylidinemalononitrile 2 in propanol using NaOH as catalyst. Various synthesized products were characterized by ¹H NMR, mass spectrometry (MS), infrared (IR), and elemental analysis. Antifungal activities of the synthesized compounds were done by testing against Rhizoctonia solani and Drechslera orazae, two fungal pathogens causing diseases on rice crops.     

Mesoporous silica supported ytterbium as catalyst for synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles

The benzimidazole ring is an important pharmacophore in contemporary drug discovery. Thus, effort to identifying new compounds containing benzimidazole scaffolds have gained much attention in recent years. In the present study, MCM‐41 type mesoporous silica with large pore (l‐MSN) supported ytterbium was successfully prepared by wet impregnation method. Among rare earth metal salts, ytterbium triflate has already been widely investigated as a catalyst in organic synthesis but less toxic ytterbium oxide has yet to be explored. Relatively high abundance and low cost of ytterbium with respect to many catalytically active metals (e.g. Pd, Au, Ru, Ir, Pt) offer an opportunity to develop sustainable catalysts for organic conversions. The catalyst has been characterized by various techniques including nitrogen adsorption, FT‐IR, TEM, SEM, EDX technique and elemental mapping. The obtained materials exhibit high surface area and a narrow distribution of mesoporosity. The catalytic performance of the Yb@l–MSNs was tested by synthesis of 1,2‐disubstituted benzimidazoles and 2‐substituted benzimidazoles through the coupling of aldehydes with o‐phenylenediamine. The catalyst resulted in excellent yields in short reaction times and the reaction showed tolerance toward both electron‐donating and electron‐withdrawing functional groups at room temperature. A particularly interesting finding was the solvent selectivity of this reaction; namely, 1,2‐disubstituted benzimidazoles generated as major product in water‐ethanol, while the 2‐substituted benzimidazoles was generated exclusively in non‐polar solvents like toluene.     

Radiation‐Grafted Polymerization from a Gas Phase to Form Polymeric Layers on Metal Surfaces

Summary: Experimentally it is shown that, under irradiation in an atmosphere of non‐saturated vinylidene chloride vapors, a polymeric layer is formed on the surface of oxidized titanium samples. The thickness of this layer increases with the increase of thickness of the oxide film. Such a dependence corresponds to the current understanding of the mechanism of formation and migration of the active excited centers that initiate grafted polymerization.

Wide range XPS spectra of oxidized titanium samples after PVDC grafting from a gas phase.     

Synthesis of Vegetable Oil‐Based Polyurethane: A Study on Curing Kinetics Behavior

In the present study, biobased polyurethane (BPU) samples were synthesized from three different polyols along with polymeric hexamethylene diisocyanate. The three different polyols were synthesized by reacting castor oil with ethylene glycol, triethylene glycol, and triethanolamine. The synthesized polyols were confirmed using proton nuclear magnetic resonance (¹H NMR) spectra analysis. BPU samples were confirmed by the disappearance of isocyanate peak in the FTIR spectra. The cross‐linking densities of all BPU samples were determined using swelling studies. Curing kinetics behavior of all BPU samples were analyzed using differential scanning calorimetry at three different heating rates (5, 7.5, and 10°C/min). The curing kinetic parameters were studied using three nonisothermal methods such as Kissinger, Flynn–Wall–Ozawa, and Ozawa, respectively. The activation energies were found to increase with increasing degree of cure (α). Surface properties of all the synthesized BPU samples were evaluated by dynamic mechanical analysis and scanning electron microscopy.     

Solvatochromicity of 3-hydroxy-4-(1-(2,4-dihydroxyphenyl)-2-hydroxy-2,2-diphenylethylidene)cyclohexa-2,5-dienone for screening of solvents

The quinonic compound 3-hydroxy-4-(1-(2,4-dihydroxyphenyl)-2-hydroxy-2,2-diphenylethylidene)cyclohexa-2,5-dienone (I) is synthesised by the reaction of benzil with 1,3-dihydroxybenzene in basic medium. Solution of this compound shows visibly distinct colour differences in different solvents. From the different absorption maxima of the compound in visible spectra it can be used as an excellent analytical reagent to screen different solvents.     

Measurements of elastic scattering for 7Be, 7Li + 9Be systems and fusion cross sections for 7Li + 9Be system

Elastic scattering angular distributions have been measured for ⁷Be + ⁹Be system at E_lab = 17, 19 and 21 MeV in the angular range θ_cm=26^○–58°, and for ⁷Li + ⁹Be system at E_lab= 15.75, 24 and 30 MeV. An optical model (OM) analysis of these data have been carried out. For the ⁷Li + ⁹Be system fusion cross sections were obtained at E_lab = 15.75, 24 and 30 MeV by measuring the α-evaporation spectra from the compound nucleus at backward angles. The measured α-evaporation spectra were reproduced by the statistical model calculations and fusion cross sections were extracted therefrom. The ratios of the experimental fusion cross sections to the total reaction cross sections (obtained form OM analysis) were found to be rather small. This result suggests that break-up process has a strong influence on fusion process leading to a reduction in fusion cross section.     

Structural,spectroscopic and redox properties of transition metal complexes of dipyrido[3,2-f:2′,3′-h]-quinoxaline (dpq)

The chemistry of first row transition metal complexes obtained from the ligand dipyrido[3,2-f:2′,3′-h]-quinoxaline (dpq) have been reported. The reaction between Cu(ClO₄)₂ · 6H₂O with dpq under different reaction conditions led to the isolation of three polymorphic copper(II) complexes [Cu(dpq)₂(H₂O)](ClO₄)₂ · H₂O (2), [Cu(dpq)₂(ClO₄)](ClO₄) (3) and [{Cu(dpq)₂(H₂O)}{Cu(dpq)₂(ClO₄)}](ClO₄)₃ (4). The bluish-green compound 2, obtained by reacting Cu(ClO₄)₂ · 6H₂O with dpq in methanol, has a distorted trigonal bipyramidal structure with τ = 0.55. The reaction between Cu(ClO₄)₂ · 6H₂O and dpq in dry acetonitrile produced the blue compound 3 in which the copper(II) centre has a distorted square planar geometry. When the condensation reaction between 1,10-phenanthroline-5,6-dione and 1,2-diaminoethane was carried out in the presence of Cu(ClO₄)₂ · 6H₂O in methanol, the green copper(II) complex 4 was isolated along with 1. The structure determination of 4 has established the presence of two different complex cations in the asymmetric unit and they are considered as co-crystals. In the zinc(II) compound [Zn(dpq)₂(ClO₄)₂] (5), the two perchlorates are unidentately coordinated to the metal centre, providing a distorted octahedral geometry. The quinoxaline ring in 5 is involved in intermolecular π–π interactions, leading to the generation of a sinusoidal chain. The proton NMR spectra, especially those of the paramagnetic complexes [Ni(dpq)₃](ClO₄)₂ (6) and [Co(dpq)₃](ClO₄)₂ (7), have been studied in detail. The electronic absorption spectra and the redox behaviour of the copper(I), copper(II), cobalt(II) and cobalt(III) complexes have been studied. The three copper(II) compounds 2–4 show identical absorption spectra and redox properties when measured in acetonitrile, although in nitromethane they show small but definite differences in their spectral and redox features.     

Bromate Exchange Resin as an Oxidizing Agent in Organic Synthesis

Bromate exchange resin has been prepared by a simple elution technique and used for the oxidation of aromatic aldehydes to the carboxylic acids. Oxidation is carried out under biphasic condition. Work up is simple. Resin immobilized bromate ions have been used for the first time as an oxidizing agent in organic synthesis.     

Beukers-like supercongruences for generalized Apéry numbers

For positive integers \(f_1,f_2,m,l\), the author and Chetry defined a generalization of Apéry numbers \(A(f_1,f_2,m,l,\lambda )\) given by

$$\begin{aligned} A(f_1,f_2,m,l,\lambda ):=\sum _{j=0}^{f_2}{f_1+j\atopwithdelims ()j}^m{f_2\atopwithdelims ()j}^l\lambda ^j. \end{aligned}$$

In this article, we prove certain Beukers-like supercongruences for these generalized Apéry numbers.

     

Temperature-induced magnetic phase transitions in crystals with competing single-ion and interionic magnetic anisotropies

Temperature-induced phase transitions in a uniaxial ferromagnetic system of spins S = 1 with competing one-particle and two-particle anisotropies are studied. It is shown that, in the case where easy-plane single-ion anisotropy dominates over easy-axis two-particle anisotropy, the transition from the paramagnetic state to a ferromagnetic state with magnetization perpendicular to the anisotropy axis is a second-order displacive magnetic phase transition. In the opposite case, where two-particle anisotropy dominates over single-particle anisotropy, the transition to a ferromagnetic state with magnetization perpendicular to the anisotropy axis is also continuous but of the order-disorder type. In a system with competing second-order one-and two-particle anisotropies, the orientational first-order phase transition can occur to a state with the magnetization directed along or perpendicular to the anisotropy axis.